Department Of Atomic Energy - Gujarat

39918072 bids are invited for supply of the ball bearing, bearing no: 6226c3, make: skfnskfag as per attached specifications (q3) , supply of ball bearing, bearing no: 7322b, make: skfnskfag as per attached specifications (q3) total quantity : 4...

Mehsana District Cooperative Milk Producers Union Limited - Gujarat

39849782 tender for we invite quotation for supply of following items: 3300756 848210 11 bearing with pedestal fytj 20 tf (fl204) 30 ea 30.10.2023 mm04 spm000006 2 3021125 848210 11 ball bearing 6204 2rs(20 x47x14),h053050 20 ea 30.10.2023 mm04 spg000011 3 3030558 848210 11 brg ball,fag/skf,6004 2rs,groove,single 30 ea 30.10.2023 mm04 spm000006 4 3032453 848320 00 padastal with bearing syj 40 tf 10 ea 30.10.2023 mm04 spm000006 5 3030728 848210 11 brg ball,fag/skf,6204 zz,deep groove...

Western Railway - Gujarat

39843787 supply of single row deep groove ball bearing 6208 / c3 or equivalent rdso approved brands for auxilliary machine bearing including 3 phase locomotive / emu. [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

39794952 supply of self aligning double row ball bearing size: 65 * 140 * 33 mm ( fag 1313 tvh c3 ) make: fag, skf or similar [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

39786541 procurement of bearings for poh track machine, bearing part no : nj2314mc3 make: fag / skf / koyo / plasser / hmt [ warranty period: 30 months after the date of delivery ] , cyl roller bearing part no : nj2214e ( make: hmt, koyo, skf, fag or plasser only ) [ warranty period: 30 months after the date of delivery ] , cyl roller bearing , fag part no nu216e.m1.c3 make: hmt, koyo , skf, fag [ warranty period: 30 months after the date of delivery ] , ball bearing hmt part no.16010, skf part no.16010, fag part no.16010 koyo part no.16010 make: hmt, koyo , skf, fag [ warranty period: 30 months after the date of delivery ] , bearing part no. 6213 make: koyo / skf / fag / hmt [ warranty period: 30 months after the date of delivery ] , bearing [ plasser part no: nu2213 ] make: plasser / skf / fag / koyo / hmt [ warranty period: 30 months after the date of delivery ] , bearing [ plasser part no: nup218mc3 ] make: hmt, koyo, skf, fag or plasser [ warranty period: 30 months after the date of delivery ] , bearing part no: 32032 make: koyo / skf / fag / hmt [ warranty period: 30 months after the date of delivery ] , bearing part no : 31310a make : hmt / koyo / skf / fag [ warranty period: 30 months after the date of delivery ] , ball bearing [ plasser part no: 6013 / 2rs ] make: koyo / skf / fag / hmt [ warranty period: 30 months after the date of delivery ] , bearing [ plasser part no: nj2313 ] make: hmt, koyo, skf, fag or plasser. [ warranty period: 30 months after the date of delivery ] ...

Gujarat State Road Transport Corporation - Gujarat

39763574 bids are invited for ball and roller bearing rc 61 2576 3340 3103 tapper roller bearing outer ( for front axle tata 1512 / 55, 1618 / 62 bs iii & bs iv & 1618 / 57 bs vi & mini ultra bs iv ) ( apl. on veh. reg. no. z 5441 to z 5902 ) 2651 3560 3101 front hub outer bearing ( for front axle tata mini ultra 7.5t bs iii & bs iv ) 2668 3560 3101 taper roller bearing ( inner ) ( 95 x 168 x 41 ) ( for rear axle tata 1618 / 62 bs iii & bs iv & 1618 / 57 bs vi ) 2668 3560 3102 taper roller bearing ( outer ) ( 85 x 150 x 38 ) ( for rear axle tata 1618 / 62 bs iii & 1515 / 55, 1618 / 62 bs iv & 1618 / 57 bs vi ) 2691 2620 3103 taper roller bearing ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv ) 2691 2630 3104 taper roller bearing ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv & 1618 / 57 bs vi ) 2786 0399 9944 ball bearing flywheel ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv ) 2576 3340 3101 tapper roller brg. inner ( for front axle tata 1512 / 55, 1618 / 62 bs iii & 1515 / 55, 1618 / 62 bs iv & 1618 / 57 bs vi ) f 0232810 or f 0p02610 outr bearing front axle ( for front axle ley 4 / 185, 4 / 186, 4 / 169, 4 / 170 bs iii & 4 / 197 bs iv & vk 2011.4t6r ( 10 mtr ) bs vi ) f 0245410 ball bearing fly wheel ( for ley 4 / 185, 4 / 186, 4 / 169, 4 / 170 bs iii & 1611, 4 / 197 bs iv & vk 2011.4t6r ( 10 mtr ) bs vi ) id 200455 ball bearing main shaft ( for gear box eicher 20.15 bs iii & mini pro 3008 bs iii & bs iv ) id 200466 ball bearing counter shaft ( for gear box eicher 20.15 bs iii & mini pro 3008 bs iii & bs iv ) id 202359 ball bearing counter shaft rear cover side ( for gear box eicher 20.15 bs iii & mini pro 3008 bs iii & bs iv ) 19 819 810 needle cage ( for gear box tata ultra mini 7.5t bs iii & bs iv ) 2505 2625 3118 roller cage lngr 28x48x30.8 bs1 / 2 / 3 / 4 / 6 ( for gear box, tata mini 7.5t bs iii & iv ) 2507 2620 3111 needle bearing ( for gear box tata ultra mini 7.5t bs iii & bs iv ) 2507 2671 3105 needel bearing for g.b ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv & 1618 / 57 bs vi ) 2573 3560 3111 taper roller bearing 32213 ( for rear axle outer mini ultra bs iv ) ( application on veh. reg. no. z 5441 to z 5902 ) 2612 3560 3102 rear hub inner bearing ( for rear axle tata mini ultra 7.5t bs iii & bs iv ) 2641 3340 3103 front hub inner bearing ( for front axle tata mini ultra 7.5t bs iii & bs iv ) 2691 2620 0142 needle cage assy. ( i, ii, iii, gear ) ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv ) 2691 2620 0143 assy. needle cage. ( 5th gear ) ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv ) 2691 2620 3106 needle cage ( rev. gear ) ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv & tata ultra mini 7.5t bs iii & bs iv ) 2691 2620 3111 needle cage bearing ( 1st speed ) ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv ) 2691 2620 3120 needle cage double row ( for gear box for tata 1512 / 55, 1618 / 62 bs iii & bs iv ) 2691 2625 3105 cylindrical roller thrust bearing. ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv ) 2691 2630 3108 taper roller bearing ( k 3585 / 25 ) offer. drgn ( for gear box tata 1618 / 62 bs iv & 1618 / 57 bs vi ) 2691 2635 3103 steel roller cage ( for gear box tata 1512 / 55, 1618 / 62 bs iii & bs iv ) 2733 3560 3103 taper roller brg. hub inner ( for front axle tata mini ultra bs iv ) ( apl. on veh. reg. no. z 5441 to z 5902 ) 2846 3340 3101 taper roller brg inner 6.5t pii bs3 / 4 ( for front axle tata 1618 / 62 bs iv ( 12mtr ) ( apl. on veh. reg. no. z 6584 to z 7046 ) 2846 3340 3102 taper roller bearing 6.5t p2 bs3 / 4 / 6 ( for front axle tata 1618 / 62 bs iv ( 12mtr ) ( apl. on veh. reg. no. z 6584 to z 7046 ) 2855 2620 3101 deep groove ball brg. ( for gear box tata ultra mini 7.5t bs iii & bs iv 2855 2630 3101 cyl. roller brg. ( c / shaft nu2208ec ) ( for gear box tata mini 7.5t bs iii & bs iv ) 5812 2560 0101 assy. clutch release bearing lipe ( for clutch tata 1515 / 55 bs iv ( 10 mtr ) ) 5817 3560 1602 taper roller bearing ( hub inner 75x125x37 ) offer d ( for rear axle mini ultra bs iv ) ( apl. on veh. reg. no. z 5441 to z 5902 ) f 0p02710 inner bearing front axle ( for ley. 4 / 185, 4 / 186, 4 / 169, 4 / 170 bs iii & 4 / 197 bs iv & vk2011.4t6r ( 10 mtr ) bs vi ) ) f3f 081 00 tapper roller bearing inner ( for rear axle leyland vk1611.d4r bs iv ( 10 mtr ) & vk2011.4t6r ( 10 mtr ) bs vi ) f3f 082 00 inner bearing for rear axle ( for leyland 4 / 170 bs iii & 4 / 197 bs iv ) f3f 083 00 outer bearing for rear axle ( for leyland 4 / 186, 4 / 170 bs iii & 1611, 4 / 197 bs iv & vk2011.4t6r ( 10 mtr ) bs vi ) ) p 1301702 or mico 1900905376 deep groove ball bearing ( for mico alternator ley 4 / 185, 4 / 186, 4 / 169 bs iii & 1611, 4 / 197 bs iv ) p 1302802 or mico 9121030900 deep groove ball bearing ( for mico alternator ley 4 / 185 bs iii & 1611, 4 / 197 bs iv ) f 0246010 taper roller bearing 567 / 563 ( for rear axle for ley mini ls 1508.7t6r bs vi ) f3f 02100 taper roller bearing 3982n / 3920 with groove for o ring – nbc make ( for rear axle for ley mini ls1508.7t6r bs vi ) f 0p06110 front axle bearing – inner ( for rear axle for ley mini ls1508.7t6r bs vi ) f 0p05810 front axle bearing – outer ( for rear axle for ley mini ls1508.7t6r bs vi ) id 200359 needle bearing 5th gear main shaft ( for gear box eicher 20.15 bs iii & mini pro 3008 bs iii & bs iv ) id 200457 needle bearing 3rd gear ( for gear box eicher 20.15 bs iii & mini pro 3008 bs iii & bs iv ) id 205080 bearing ballengine flywheelfor eicher pro 3008 mini bus bs iv id 206292 needle roller brg. 3rd gear b60243 11.12 ( for gear box eicher mini pro 3008 bs iv ) id 206293 needle roller brg. 4th gear b60244 11.12 ( for gear box eicher mini pro 3008 bs iv ) id 312182 spherical bearing dia18 ( for gear box eicher mini pro 3008 bs iii & bs iv ) id 312614 bearing clutch release shaft ( for shaft clutch release eicher pro 3008 mini bus bs iv ) id 320559 center bearing and retain ( for propeller shaft eicher mini pro 3008 bs iii & bs iv ) id 338285 or id 304644 assy clutch release bearing ( for clutch eicher 20.15, bs iii & mini pro 3008 bs iv ) if 000146 rear hub outer bearing ( for rear axle for eicher mini pro 3008 bs iii & bs iv ) if 000147 rear hub inner bearing ( for rear axle eicher mini pro 3008 bs iii & bs iv ) if 000501 front hub outer bearing ( for front axle eicher mini pro 3008 bs iii & bs iv ) if 000502 front hub inner bearing ( for front axle eicher mini pro 3008bs iii & bs iv ) total quantity : 19835...

Western Railway - Gujarat

39622502 supply of double ball bearing no. 2310 for jamalpur jack. make: nbc / skf / fag / koyo. ] , double ball bearing no. 2310 for jamalpur jack. make: nbc / skf / fag / koyo. [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

39581836 supply of ball bearing 6308 c3 for mrb motors for three phase locomotives, make: fag, skf, tata, texspin and nbc only. [ warranty period: 30 months after the date of delivery ] ...

Western Railway - Gujarat

39438460 procurement of bearing for poh track machine., ball bearing deep groove single, part no. 6209zz / 6209 2z / 6209 zr, make: hmt, koyo, skf, fag [ warranty period: 30 months after the date of delivery ] , spherical roller bearing, part no. 22208 mb, [ make : hmt, skf, fag, koyo ] [ warranty period: 30 months after the date of delivery ] , ball bearing [ plasser part no : kh3050 ] make: hmt, koyo , skf, fag [ warranty period: 30 months after the date of delivery ] , bearing [ part no: 22224e1 xl c3 ] make: plasser, skf, fag, koyo . [ warranty period: 12 months after the date of delivery ] , bearing ( plasser part no: 6308 2rsr ) make : hmt, koyo, skf, fag [ warranty period: 30 months after the date of delivery ] ...

Department Of Atomic Energy - Gujarat

39385164 bids are invited for pic component mountining cleats, make pic, part no. l2 2 , coupling clamp split type , make pic, part no. l4 3 , flanged double shielded ball bearing, make pic , part no. mbg 8 5 , hub clamp ss , make pic, part no. mcl 1 6 , counter sunk hd screw 4 40 lg 0.25 inch, make pic, part no. y3 4 t , fillister hd machine screw, make pic , part no. msw 1 4 6 , mountining cleats make pic part no. l2 12 , spur gear, make pic, part no. h23 30 , spur gear , make pic, part no. h23 36 , spur gear, make pic part no. h26 36 , spur gear, make pic part no. h23 22 split hub total quantity : 406...

Western Railway - Gujarat

39263262 supply of srdg ball bearing for bearing of mvmt ( old motors ) make skf 6312 with c3 clearance or equivalent rdso approved brands for auxiliary machine bearing including 3 phase locomotive / emu. [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

39071011 supply of ls11 ball bearing having outside diameter 63.482 mm, bore 28.575 mm, width 15.875mm of nbc make or of flt / skf / fag / tata make having similar quality. only oem or authorised distributor / authorised dealer / authorised stockist can quote. [ warranty period: 30 months after the date of delivery ] ...

Indian Army - Gujarat

39034314 bids are invited for mt spares ac compressor , ac condensor , speedometer , oil send unit , injector , coolant pump , stator assy , semicond dev. diode , ball bearing dg , ball bearing , bearing self starter , w motor gear set total quantity : 16...

Department Of Atomic Energy - Gujarat

39009694 bids are invited for supply of ball bearing, bering no: 6060 mrc3 or equivalent, make: skffagntn (q3) , supply of bearing, bearing no: 7364 bamr or equivalent, make: skffagntn (q3) total quantity : 2...

Western Railway - Gujarat

38910085 supply of winding wire, supply of following items ( 1 ) winding wire 33 swg qty. 1 kg. ( 2 ) winding wire 34 swg qty. 1 kg. ( 3 ) winding wire 35 swg qty. 1 kg. ( 4 ) winding wire 36 swg qty. 1 kg. ( 5 ) winding wire 37 swg qty. 1 kg. ( 6 ) winding wire 39 swg qty. 1 kg. ( 7 ) ball bearing 6201 ( nbc ) qty. 20 nos. ( 8 ) ball bearing 6202 ( nbc ) qty. 20 nos. all above 8 items total qty. = 1 set. note: ( 1 ) oem / proof of purchase to be submit along with material supply. ( 2 ) delivery required at: sr. section engineer ( electric ) repair shop, old coaching depot, near kalupur ghee bazar, kalupur , ahmedabad 380001 gujarat [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

38902436 supply of ls11 ball bearing having outside diameter 63.482 mm, bore 28.575 mm, width 15.875mm of nbc make or of flt / skf / fag / tata make having similar quality. only oem or authorised distributor / authorised dealer / authorised stockist can quote. [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

38886802 bids are invited for 1. battery charger self regulated type 230 v ac input 110v dc output current ratting 30 a ( as per irs s:86 / 2000 ) with latest amendment 4.nos senior section engineer / signal / stores / rajkot 2. ferro resonant type automatic voltage regulator ( as per irs :s 74 / 89 with latest amd. ) 5kva 4.nos senior section engineer / signal / stores / rajkot 3. electric ceiling fan 1200 mm sweep with bldc fan motor consisting of double ball bearing, white color, remote control and other accessories. make: usha, crompton, orient, khaitan. 80.nos section engineer ( el ) hapa 4. 1.5 ton inverter type five star split air conditioner refrigerant charged, piping, remote make lg, haier, godrej, voltash, whirlpool, blue star 12.nos section engineer ( el / rac ) rajkot 5. supply and installation of rechargeable tubular battery, capacity 12v and 100ah / 105ah for solar rolling in / out hut. make: amaron or exide or microtek only. preferred make solar blitz 6sbz105l of exide. warranty of minimum 24 months or above to be provided. 3.nos section engineer ( c&w ) okha total quantity : 103...

Gujarat State Electricity Corporation Limited - Gujarat

38850127 supply of lighting and consumable material for cpem at gandhinagar tps ceiling fan, energy efficient 50 watt , 1200 mm sweep, white colour, 3 blades, complete with 300 mm down rod, canopies, shakles, resistance type 5 speed regulator, double ball bearing type, operated on ac 230 v,20 amp. 240v spn industrial type socket outlet with 2 pole and earth metal enclosed plug top along with 20 amp. c series sp mcb in sheet steel enclosure on surface with chained metal cover for the socket out let.,exhaust fan 380 mm sweep, rpm 950, single phase, 230 volt crompton,exhaust fan single phase 230/240v size 450 mm [18"],24" exhaust fan with motor,gelco make electronic digital time/quartz timer model no dts 502, capacity: 25 a, 230 volts, single phase n for street light on/off,pvc twin wire 2.5mm sqr.,copper flexible wire 3 cx2.5 sqmm ,1.1 kv,3 cx1.5 sqmm flexible copper conductor 1100 v,cable tie for electricals wires & cables.,elmex terminal connector 35 sqmm type cst 35,95mm terminal block,make= elmex,type= cbt 250.,connector `elmex` cst type cbt 110,35 mm,connector `elmex` cst type cbt 170,70 mm,elmex terminal block ( cst 10 ),#z955 (sl) srippex sltape roll (silicon rubber, self amalgamating, high temperature resistance tape size: 25mm0.50mm15mtr./roll,electical saftey equipment tester taparia product no:814 voltage range:110v to 230v,auxiliary relay re 300 coil voltage 250v dc,wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd,frp telescopic earthing/discharge rod suitable for 7.2kv system voltage....

Western Railway - Gujarat

38838137 supply of ceramic hybrid ball bearing 6305 tnh / hc5 c3 of skf imported or equivalent for emd make modified vertical fuel pump motor. [ warranty period: 30 months after the date of delivery ] => limited...

Department Of Defence - Gujarat

38753001 bids are invited for procurement of ro plant spare ball bearing for hp pump , repair kit pump bng4 , 6 valves kit 5cp6221 hp pump , seal hp pump 5cp6221 , in line carbon filter , r45 o ring 91.44 x 5.33 nbr , hp pump oil can 1 ltr , o ring 13 x 1.5 nbr 70sh , 2.5 s inter plug dia 16mm , o ring 18, 40 x 2.70 nbr 70sh r14 total quantity : 24...

Western Railway - Gujarat

38677810 supply of single row deep groove ball bearing skf 6304 with c3 clearance or equivalent rdso approved brands for auxilliary machine bearing including 3 phase locomotive / emu [ warranty period: 30 months after the date of delivery ] amm ( dl ) vta , wr gujarat 60.00 numbers => limited...

Western Railway - Gujarat

38673691 supply of for diesel depot : ball bearing 6305 2rs1 or 2rsh. accepted make skf / fag imported ( european origin ) or nsk / japan. ( for ac fuel pump motor , ac crank case exhauster motor and ac cyclonic filter dust exhauster blower motor. ) . [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

38575027 supply of double groove ball bearing, skf no.4306 atn 9 or similar. rdso approved brand for auxiliary machine bearings including 3 phase locomotives and emus [ warranty period: 30 months after the date of delivery ] => limited...

Road And Building Department - Gujarat

38550077 annual rate of electric works for various buildings under ( r&b ) division, valsad ( sub division, valsad, vapi & dharampur ) point wiring for light / fan / bell / primary point with 2 1.5 sq. mm & earth wire of 1.5 sq. mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6a tissino type isi marked flush type switch / bell push and accessories erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete, point wiring for light / fan / bell / primary point with 2 1.5 sq. mm & earth wire of 1.5 sq. mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6a tissino type isi marked flush type switch / bell push and accessories erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( b ) with 16 swg ( 1.6 mm thick ) hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete, point wiring for light / fan / bell / primary point with 2 1.5 sq. mm & earth wire of 1.5 sq. mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6a tissino type isi marked flush type switch / bell push and accessories erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete, point wiring for light / fan / bell / primary point with 2 1.5 sq. mm & earth wire of 1.5 sq. mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6a tissino type isi marked flush type switch / bell push and accessories erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete, point wiring for light / fan / bell / primary point with 2 1.5 sq. mm & earth wire of 1.5 sq. mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6a tissino type isi marked flush type switch / bell push and accessories erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( e ) in existing pipe erected flushed on wall / ceiling complete, point wiring for light / fan / bell / primary point with 2 1.5 sq. mm & earth wire of 1.5 sq. mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto max length of 10 mt, in below type of pipe erected with 6a tissino type isi marked flush type switch / bell push and accessories erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ a ] for 6 amp plug and 6 amp switch with 2 1.5 sq. mm cu. mains from near by switchboard / db board upto 6 mt. ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ a ] for 6 amp plug and 6 amp switch with 2 1.5 sq. mm cu. mains from near by switchboard / db board upto 6 mt. ( b ) with 16 swg ( 1.6 mm thick ) hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ a ] for 6 amp plug and 6 amp switch with 2 1.5 sq. mm cu. mains from near by switchboard / db board upto 6 mt. ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ a ] for 6 amp plug and 6 amp switch with 2 1.5 sq. mm cu. mains from near by switchboard / db board upto 6 mt. ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ a ] for 6 amp plug and 6 amp switch with 2 1.5 sq. mm cu. mains from near by switchboard / db board upto 6 mt. ( e ) in existing pipe erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ a ] for 6 amp plug and 6 amp switch with 2 1.5 sq. mm cu. mains from near by switchboard / db board upto 6 mt. ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ b ] 6 / 16a plug and 16 amp switch with 2 2.5 sq. mm cu. mains from mcb d b boards. ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ b ] 6 / 16a plug and 16 amp switch with 2 2.5 sq. mm cu. mains from mcb d b boards. ( b ) with 16 swg ( 1.6 mm thick ) hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ b ] 6 / 16a plug and 16 amp switch with 2 2.5 sq. mm cu. mains from mcb d b boards. ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ b ] 6 / 16a plug and 16 amp switch with 2 2.5 sq. mm cu. mains from mcb d b boards. ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ b ] 6 / 16a plug and 16 amp switch with 2 2.5 sq. mm cu. mains from mcb d b boards. ( e ) in existing pipe erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ b ] 6 / 16a plug and 16 amp switch with 2 2.5 sq. mm cu. mains from mcb d b boards. ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ c ] 6 / 16a plug and 16 a switch with 2 4 sq.mm cu. mains with 2.5 sq.mm ( green ) earthing wire ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ c ] 6 / 16a plug and 16 a switch with 2 4 sq.mm cu. mains with 2.5 sq.mm ( green ) earthing wire ( b ) with 16 swg ( 1.6 mm thick ) hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ c ] 6 / 16a plug and 16 a switch with 2 4 sq.mm cu. mains with 2.5 sq.mm ( green ) earthing wire ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ c ] 6 / 16a plug and 16 a switch with 2 4 sq.mm cu. mains with 2.5 sq.mm ( green ) earthing wire ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ c ] 6 / 16a plug and 16 a switch with 2 4 sq.mm cu. mains with 2.5 sq.mm ( green ) earthing wire ( e ) in existing pipe erected flushed on wall / ceiling complete, point wiring for independent plug with following size mains earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires upto 10 mt length, in following below of pipe erected complete with isi marked 3 / 5 pin socket and tissino type switch erected with earth continuity connection erected on metal / pvc / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic / laminated sheet. [ c ] 6 / 16a plug and 16 a switch with 2 4 sq.mm cu. mains with 2.5 sq.mm ( green ) earthing wire ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete, point wiring for on board looped plug with tissino type single pole isi marked switch and socket erected with necessary connections erected on wooden / metal / pvc box covered with 3 mm thick pc ( polycarbonate ) / acrylic sheet for open / concealed wiring for following size. [ a ] for 6 amp., point wiring for on board looped plug with tissino type single pole isi marked switch and socket erected with necessary connections erected on wooden / metal / pvc box covered with 3 mm thick pc ( polycarbonate ) / acrylic sheet for open / concealed wiring for following size. [ b ] for 16 amp., point wiring for two way controlled light point with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6a tissino type isi marked accessories with earth continuity erected on metal / pvc / / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete, point wiring for two way controlled light point with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6a tissino type isi marked accessories with earth continuity erected on metal / pvc / / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( b ) with 16 swg ( 1.6 mm thick ) hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete, point wiring for two way controlled light point with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6a tissino type isi marked accessories with earth continuity erected on metal / pvc / / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete, point wiring for two way controlled light point with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6a tissino type isi marked accessories with earth continuity erected on metal / pvc / / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete, point wiring for two way controlled light point with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6a tissino type isi marked accessories with earth continuity erected on metal / pvc / / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( e ) in existing pipe erected flushed on wall / ceiling complete, point wiring for two way controlled light point with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6a tissino type isi marked accessories with earth continuity erected on metal / pvc / / wooden box covered with 3 mm thick pc ( polycarbonate ) / acrylic sheet. with necessary lamp holder / ceiling rose / h.d.connector as directed. ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete, point wiring for light / bell with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6a modular type switch / bell push & accessories and earth continuity of following type, erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary lamp holder / ceiling rose / h.d.connector as directed. ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete cat. ii, point wiring for light / bell with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6a modular type switch / bell push & accessories and earth continuity of following type, erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary lamp holder / ceiling rose / h.d.connector as directed. ( b ) with 16 swg hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete cat. ii, point wiring for light / bell with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6a modular type switch / bell push & accessories and earth continuity of following type, erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary lamp holder / ceiling rose / h.d.connector as directed. ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete cat. ii, point wiring for light / bell with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6a modular type switch / bell push & accessories and earth continuity of following type, erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary lamp holder / ceiling rose / h.d.connector as directed. ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete cat. ii, point wiring for light / bell with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6a modular type switch / bell push & accessories and earth continuity of following type, erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary lamp holder / ceiling rose / h.d.connector as directed. ( e ) in existing pipe erected flushed on wall / ceiling complete cat. ii, point wiring for light / bell with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6a modular type switch / bell push & accessories and earth continuity of following type, erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected, with necessary lamp holder / ceiling rose / h.d.connector as directed. ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete cat. ii, point wiring for fan with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of .isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6a modular type switch and hum free eme four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / h.d.connector as directed. ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete cat. ii, point wiring for fan with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of .isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6a modular type switch and hum free eme four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / h.d.connector as directed. ( b ) with 16 swg hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete cat. ii, point wiring for fan with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of .isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6a modular type switch and hum free eme four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / h.d.connector as directed. ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete cat. ii, point wiring for fan with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of .isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6a modular type switch and hum free eme four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / h.d.connector as directed. ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete cat. ii, point wiring for fan with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of .isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6a modular type switch and hum free eme four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / h.d.connector as directed. ( e ) in existing pipe erected flushed on wall / ceiling complete cat. ii, point wiring for fan with 2 1.5 sq.mm & earth wire of 1.5 sq.mm ( green ) both are of .isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6a modular type switch and hum free eme four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / h.d.connector as directed. ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ i ] for 6a plug and 6 a switch with 2 1.5 sq.mm cu. wire from nearby switchboard / mcb db board ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ i ] for 6a plug and 6 a switch with 2 1.5 sq.mm cu. wire from nearby switchboard / mcb db board ( b ) with 16 swg hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ i ] for 6a plug and 6 a switch with 2 1.5 sq.mm cu. wire from nearby switchboard / mcb db board ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ i ] for 6a plug and 6 a switch with 2 1.5 sq.mm cu. wire from nearby switchboard / mcb db board ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ i ] for 6a plug and 6 a switch with 2 1.5 sq.mm cu. wire from nearby switchboard / mcb db board ( e ) in existing pipe erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ i ] for 6a plug and 6 a switch with 2 1.5 sq.mm cu. wire from nearby switchboard / mcb db board ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ ii ] for 16a plug and 16 amp switch with 2 2.5 sq.mm cu. wire from mcb db board. ( a ) with medium class rigid pvc pipe and accessories erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ ii ] for 16a plug and 16 amp switch with 2 2.5 sq.mm cu. wire from mcb db board. ( b ) with 16 swg hgs metal conduit pipe and accessories painted black erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ ii ] for 16a plug and 16 amp switch with 2 2.5 sq.mm cu. wire from mcb db board. ( c ) with oval conduit / pvc casing capping double lock type erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ ii ] for 16a plug and 16 amp switch with 2 2.5 sq.mm cu. wire from mcb db board. ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ ii ] for 16a plug and 16 amp switch with 2 2.5 sq.mm cu. wire from mcb db board. ( e ) in existing pipe erected flushed on wall / ceiling complete cat. ii, point wiring for individual plug with & earth wire of 1.5 sq.mm ( green ) both are of isi marked 1.1 kv grade frls pvc insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with modular type switch & 5 pin plug erected on pvc / metallic / wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [ ii ] for 16a plug and 16 amp switch with 2 2.5 sq.mm cu. wire from mcb db board. ( f ) with medium class rigid pvc pipe and accessories erected concealed in wall / ceiling complete cat. ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 1 ) one no. sp 6 amp. cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 2 ) one no 5 pin plug cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 3 ) two pin / rj 11 telephone socket [ a ] for one gang cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 3 ) two pin / rj 11 telephone socket [ b ] for two gang cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 4 ) tv co axial socket outlet cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 5 ) electronic hum free four or more steps eme fan regulator cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 6 ) fuse units 10amp. or 16 amp. cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 7 ) blank plate single cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 8 ) computer rj 45 socket cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 9 ) 16 amp. sp one way switch cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 10 ) 6 / 16amp. universal socket cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 11 ) 6 amps. bell push cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 12 ) 6amp. / 16 amp. two way switch cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 13 ) 6a / 10a / 16a / 20a / 25a / 32a single pole modular mcb switch cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 14 ) 6a / 10a / 16a / 20a / 25a / 32a double pole modular mcb switch cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 15 ) 32 amps. dp switch with indicator cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 16 ) 32 amp. dp main switch operating with energy key tag cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 17 a ) for 400w / 450 watt one module electronic dimmer cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 17 b ) for 600 / 650 watt two module electronic dimmer dimmer cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 17 c ) for 1000 watt two module electronic dimmer cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 18 ) 13 amp. international modular socket cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 20 ) modular buzzer cat.ii, providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic / white front plate , modules erected with necessary connections as per site situation directed by engineer in charge. ( 22 ) 16 / 20 / 25 amp. modular starter for motor / a.c. unit complete cat.ii, providing and erecting isi mark medium class rigid pvc pipes of following size complete to be erected on / in wall or ceiling erected with necessary pvc fittings & junction boxes fixed with adhesive solution & clamps with following dia of pipes, in approved manner as directed ( a ) 20 mm, providing and erecting isi mark medium class rigid pvc pipes of following size complete to be erected on / in wall or ceiling erected with necessary pvc fittings & junction boxes fixed with adhesive solution & clamps with following dia of pipes, in approved manner as directed ( b ) 25 mm, providing and erecting isi mark medium class rigid pvc pipes of following size complete to be erected on / in wall or ceiling erected with necessary pvc fittings & junction boxes fixed with adhesive solution & clamps with following dia of pipes, in approved manner as directed ( c ) 32 mm, providing & erecting approved make oval conduit with necessary fittings fixed with adhesive solution and suitable clamps erected on wall / ceiling of following size. ( 1 ) 20 mm, providing & erecting approved make oval conduit with necessary fittings fixed with adhesive solution and suitable clamps erected on wall / ceiling of following size. ( 2 ) 25mm, supplying & erecting upvc mini trunking ( pvc casing n capping ) having double locking arrangement with grooves, trunking of size not below 12.5 mm in height as per is with accessories of pvc / resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . ( 1 ) 20 mm, supplying & erecting upvc mini trunking ( pvc casing n capping ) having double locking arrangement with grooves, trunking of size not below 12.5 mm in height as per is with accessories of pvc / resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . ( 2 ) 25 mm, supplying & erecting upvc mini trunking ( pvc casing n capping ) having double locking arrangement with grooves, trunking of size not below 12.5 mm in height as per is with accessories of pvc / resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . ( 3 ) 32 mm, supplying and laying upvc cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame proof confirming bs with necessary end caps internal and external bend, flat bends, coupler, tee etc..all necessary accessories and measuring of following sizes ( 1 ) 75 mm x 50 mm trunking, supplying and laying upvc cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame proof confirming bs with necessary end caps internal and external bend, flat bends, coupler, tee etc..all necessary accessories and measuring of following sizes ( 2 ) 100 mm x 50 mm trunking, supply & installation of modular type accessories for u pvc snap on adaptable trunking / pop up box with required items erected with necessary connection. as desired by engineer in charge i ) 6 a sp 1 way switch cat iii, supply & installation of modular type accessories for u pvc snap on adaptable trunking / pop up box with required items erected with necessary connection. as desired by engineer in charge ii ) 16a sp 1 way switch cat iii, supply & installation of modular type accessories for u pvc snap on adaptable trunking / pop up box with required items erected with necessary connection. as desired by engineer in charge iii ) bell push 6 a sp 1 way cat iii, supply & installation of modular type accessories for u pvc snap on adaptable trunking / pop up box with required items erected with necessary connection. as desired by engineer in charge iv ) 6a universal socket shuttered cat iii, supply & installation of modular type accessories for u pvc snap on adaptable trunking / pop up box with required items erected with necessary connection. as desired by engineer in charge iv ) 6 / 16 a universal socket shuttered cat iii, supply & installation of modular type accessories for u pvc snap on adaptable trunking / pop up box with required items erected with necessary connection. as desired by engineer in charge v ) rj 11 telephone socket cat iii, supply & installation of modular type accessories for u pvc snap on adaptable trunking / pop up box with required items erected with necessary connection. as desired by engineer in charge vi ) cat 6 lan socket cat iii, providing & erecting 16 gauge hgs conduit pipe ( as per is ) painted black surface / concealed of following size complete to be erected on / in wall or ceiling with erected with necessary saddles, screws, bends, junction boxes etc. with following ( nominal bore ) dia of pipes, in approved manner as directed ( 1 ) 19 / 20 mm, providing & erecting 16 gauge hgs conduit pipe ( as per is ) painted black surface / concealed of following size complete to be erected on / in wall or ceiling with erected with necessary saddles, screws, bends, junction boxes etc. with following ( nominal bore ) dia of pipes, in approved manner as directed ( 2 ) 25 mm, providing & erecting 16 gauge hgs conduit pipe ( as per is ) painted black surface / concealed of following size complete to be erected on / in wall or ceiling with erected with necessary saddles, screws, bends, junction boxes etc. with following ( nominal bore ) dia of pipes, in approved manner as directed ( 3 ) 32 mm, providing & erecting 16 gauge hgs conduit pipe ( as per is ) painted black surface / concealed of following size complete to be erected on / in wall or ceiling with erected with necessary saddles, screws, bends, junction boxes etc. with following ( nominal bore ) dia of pipes, in approved manner as directed ( 4 ) 38 / 40 mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( a ) 2 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( b ) 2 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( c ) 3 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( d ) 3 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( e ) 4 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( f ) 4 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( g ) 6 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( a ) 2 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( b ) 2 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( c ) 3 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( d ) 3 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( e ) 4 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( f ) 4 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( g ) 6 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping ( a ) 2 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping ( b ) 2 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping ( c ) 3 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping ( d ) 3 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping ( e ) 4 wire 1.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping ( f ) 4 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( d ) partial pvc pipe and drops in oval conduit / pvc casing capping ( g ) 6 wire 2.5 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( a ) 2 wire 4 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( b ) 2 wire 6 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( c ) 2 wire 10 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( d ) 3 wire 4 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( e ) 3 wire 6 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( f ) 3 wire 10 sq. mm ( use earth wire of 4 sq.mm ) , providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( g ) 4 wire 4 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( h ) 4 wire 6 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( a ) with medium class rigid pvc pipe and accessories ( i ) 4 wire 10 sq. mm ( use earth wire of 4 sq.mm ) , providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( a ) 2 wire 4 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( b ) 2 wire 6 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( c ) 2 wire 10 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( d ) 3 wire 4 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( e ) 3 wire 6 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( f ) 3 wire 10 sq. mm ( use earth wire of 4 sq.mm ) , providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( g ) 4 wire 4 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( h ) 4 wire 6 sq. mm, providing and erecting mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for earth continuity of following size ( c ) with oval conduit / pvc casing capping double lock type ( i ) 4 wire 10 sq. mm ( use earth wire of 4 sq.mm ) , supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. a ) 0.75 sq.mm twin twisted, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. b ) 1.00 sq.mm twin twisted, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. c ) 1.00 sq.mm 2 core round / flat pvc sheathed, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. d ) 1.50 sq.mm 2 core round pvc sheathed, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. e ) 1.50 sq.mm 3 core round pvc sheathed, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. f ) 1.50 sq.mm 4 core round pvc sheathed, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. g ) 2.50 sq.mm 2 core round pvc sheathed, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. h ) 2.50 sq.mm 3 core round pvc sheathed, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. i ) 2.50 sq.mm 4 core round pvc sheathed, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. j ) 4.00 sq.mm 3 core round pvc sheathed, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed. k ) 4.00sq.mm 4 core round pvc sheathed, supplying & erecting approved make telephone cable electrolytic copper conductor pe insulation twisted in two pairs, & wrapped with frls pvc tape & sheathed with frls pvc or hffr outer jacket suitable for telephone wiring & confirming to c dot erected in existing pipe. of following size of conductors & nos.of pairs. with necessary connections. [ a ] conductor size 0.5 mm ( a ) unarmoured 1 ) one pair, supplying & erecting approved make telephone cable electrolytic copper conductor pe insulation twisted in two pairs, & wrapped with frls pvc tape & sheathed with frls pvc or hffr outer jacket suitable for telephone wiring & confirming to c dot erected in existing pipe. of following size of conductors & nos.of pairs. with necessary connections. [ a ] conductor size 0.5 mm ( a ) unarmoured 2 ) two pairs, supplying & erecting approved make telephone cable electrolytic copper conductor pe insulation twisted in two pairs, & wrapped with frls pvc tape & sheathed with frls pvc or hffr outer jacket suitable for telephone wiring & confirming to c dot erected in existing pipe. of following size of conductors & nos.of pairs. with necessary connections. [ a ] conductor size 0.5 mm ( a ) unarmoured 3 ) three pairs, supplying & erecting approved make telephone cable electrolytic copper conductor pe insulation twisted in two pairs, & wrapped with frls pvc tape & sheathed with frls pvc or hffr outer jacket suitable for telephone wiring & confirming to c dot erected in existing pipe. of following size of conductors & nos.of pairs. with necessary connections. [ a ] conductor size 0.5 mm ( a ) unarmoured 4 ) five pairs, supplying & erecting approved make telephone cable electrolytic copper conductor pe insulation twisted in two pairs, & wrapped with frls pvc tape & sheathed with frls pvc or hffr outer jacket suitable for telephone wiring & confirming to c dot erected in existing pipe. of following size of conductors & nos.of pairs. with necessary connections. [ a ] conductor size 0.5 mm ( a ) unarmoured 5 ) ten pairs, supplying & erecting approved make telephone cable electrolytic copper conductor pe insulation twisted in two pairs, & wrapped with frls pvc tape & sheathed with frls pvc or hffr outer jacket suitable for telephone wiring & confirming to c dot erected in existing pipe. of following size of conductors & nos.of pairs. with necessary connections. [ a ] conductor size 0.5 mm ( a ) unarmoured 6 ) twenty pairs, supplying & erecting approved make lan cable of following size in existing pipe as per direction [ c ] cat 6, providing & erecting switch board for computer or electric apparatus consisting of following modular type accessories mounted with pvc / metallic concealed / open box with single mounting base frame covered with textured / metallic / white front plate, modules erected with necessary connections as directed 1 no. 6a / 16a universal plug switch combined. 3 nos. 6a switch 3 nos. 6a 5 pin plug for modular type accessories cat. ii, approved make high pressure sodium vapour lamp, tubular / elliptical type 70w. 230 / 240 / 250v. erected, if required. cat.ii, approved make high pressure sodium vapour lamp, tubular / elliptical type 150w, 230 / 240 / 250v, erected , if required cat.ii, approved make cfl retrofit 5 / 7 / 9 / 11 watt, erected if required cat.ii, approved make c.f.l. retrofit 13 / 15 / 18 watt erected if required cat.ii, approved make c.f.l.retrofit 20 / 23 / 25 / 26 watt. erected if required cat.ii, approved make c.f.l.retrofit of following size erected if required [ a ] 35 / 36 watt cat.ii, approved make c.f.l.retrofit of following size erected if required [ b ] 40 / 45 watt cat.ii, approved make c.f.l.retrofit of following size erected if required [ c ] 55 / 65 / 85 watt cat.ii, providing and erecting decorative wall bracket fittings complete with led lamp and rust free fittings components mounted in chrome finish housing with holder , clear / opaque glass diffuser complete erected with lead wires with minimum 15 wattage capacity as per instruction engineer incharge / architect / authority .cat iii, supplying and erecting approved make of tube fitting with one no t 5 tube 24 / 28 w with electronic ballast with each tube separately thd less than 10 & built in adaptors, gi / pvc housing & mirror optic reflector, suitable to work on 120v 300v, a.c. supply with connector and adapter if required. [ make of fitting & tube may be differ& fitting shall be providing with tube ] cat ii, supplying & erecting energy saving energy efficient e+ ( 1 4 ft ) 28 watt retrofit tube fitting with one no 28watt t 5 tube complete with e.g.p. wings reflector / clear acrylic guard cover & tube and electronic inbuilt circuit ballast of rating 130 to 325 v a.c. the fittings should be able to fit in any conventional existing t 8 tube fittings complete erected in an approved manner., outdoor street light fitting side entry with clear acrylic / plastic / polystyrene cover complete with starter, polyester choke copper wound complete erected with 40 / 36 watt tube holders. with lead wire and connections. ( b ) with 2 tube 40 watt.120 cms. cat.ii, providing and erecting approved make c.f.l out door type street light fitting side entry with clear acrylic / plastic cover electronic ballast high circuit p.f. weather proof design ( ip 65 ) thd less than 10% rust free fitting components mounted in powder coated crca / al. housing with lead wire & with non retrofit cfl tube complete. [ a ] with one cfl tube 9 / 11 / 13 / 18 watt non retrofit with ballast & holder cat.ii, providing and erecting approved make c.f.l out door type street light fitting side entry with clear acrylic / plastic cover electronic ballast high circuit p.f. weather proof design ( ip 65 ) thd less than 10% rust free fitting components mounted in powder coated crca / al. housing with lead wire & with non retrofit cfl tube complete. [ b ] with two cfl tube 9 / 11 / 13 / 18 watt non retrofit with ballast & holder cat.ii, providing and erecting approved make c.f.l out door type street light fitting side entry with clear acrylic / plastic cover electronic ballast high circuit p.f. weather proof design ( ip 65 ) thd less than 10% rust free fitting components mounted in powder coated crca / al. housing with lead wire & with non retrofit cfl tube complete. [ c ] with one cfl tube 36 watt retrofit or non retrofit with ballast & holder cat.ii, supply & fixing decorative hanging light with glass having cylindrical or square shape having length not less than 10" & width not less 3.5" with holder, lead wire as per required length but not more than 1mm & base plate for fixing the fitting with ceiling. [ a ] suitable for led lamp cat ii, providing and erecting approved make street light luminaire with one no suitable for hpsv / mh lamp complete with control gear and accessories , single piece deep drawn aluminium housing with two compartments duly stove enameled painted side reflector protective acrylic cover, synthetic felt gasket, necessary hardware. the fitting should be suitable for side entry having suitable socket bore for clamping complete erected. ( a ) with 70 watt svl. / metal halide lamp cat.ii, providing and erecting approved make street light luminaire with one no suitable for hpsv / mh lamp complete with control gear and accessories , single piece deep drawn aluminium housing with two compartments duly stove enameled painted side reflector protective acrylic cover, synthetic felt gasket, necessary hardware. the fitting should be suitable for side entry having suitable socket bore for clamping complete erected. ( b ) with 150 watt svl. / metal halide lamp cat.ii, providing and erecting approved make street light luminaire with one no suitable for hpsv / mh lamp complete with control gear and accessories , single piece deep drawn aluminium housing with two compartments duly stove enameled painted side reflector protective acrylic cover, synthetic felt gasket, necessary hardware. the fitting should be suitable for side entry having suitable socket bore for clamping complete erected. ( c ) with 250 watt svl. / metal halide lamp cat.ii, supplying & erecting control gear box, weather proof made of cast aluminium with heavy duty copper polyester choke, condenser, mcb, connector block & earthing terminal complete erected with necessary screws, nuts & bolts clamps suitable for ( a ) for hpsv / mh lamp with ignitor for one no. lamp. ( i ) 7ow cat ll, supplying & erecting control gear box, weather proof made of cast aluminium with heavy duty copper polyester choke, condenser, mcb, connector block & earthing terminal complete erected with necessary screws, nuts & bolts clamps suitable for ( a ) for hpsv / mh lamp with ignitor for one no. lamp. ( ii ) 150 w cat ll, supplying & erecting control gear box, weather proof made of cast aluminium with heavy duty copper polyester choke, condenser, mcb, connector block & earthing terminal complete erected with necessary screws, nuts & bolts clamps suitable for ( a ) for hpsv / mh lamp with ignitor for one no. lamp. ( iii ) 250 w cat ll, supplying & erecting control gear box, weather proof made of cast aluminium with heavy duty copper polyester choke, condenser, mcb, connector block & earthing terminal complete erected with necessary screws, nuts & bolts clamps suitable for ( a ) for hpsv / mh lamp with ignitor for one no. lamp. ( iv ) 40ow cat ll, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513 / crca / aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark / name 120 to 300 v, power factor more than 0.9, thd < 10 %, cct 3000 k to 6500k, luminaire efficacy> 85 lumens / watt , led efficiency 110 lumens / watt led driver efficiency > 85 % cree / osram / philips lumileds / nichia / seoul / bridgelux make led used for luminaire. ( fitting required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) tube light with integral driver ( a ) 5 9 watts, surge 2 kv, ip 20, 2 feet cat ll, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513 / crca / aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark / name 120 to 300 v, power factor more than 0.9, thd < 10 %, cct 3000 k to 6500k, luminaire efficacy> 85 lumens / watt , led efficiency 110 lumens / watt led driver efficiency > 85 % cree / osram / philips lumileds / nichia / seoul / bridgelux make led used for luminaire. ( fitting required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) tube light with integral driver ( b ) 12 14 watts, surge 2 kv, ip 20, 4 feet cat ll, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513 / crca / aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark / name 120 to 300 v, power factor more than 0.9, thd < 10 %, cct 3000 k to 6500k, luminaire efficacy> 85 lumens / watt , led efficiency 110 lumens / watt led driver efficiency > 85 % cree / osram / philips lumileds / nichia / seoul / bridgelux make led used for luminaire. ( fitting required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) tube light with integral driver ( c ) 16 20 watts, surge 2kv, ip 20, 4 feet cat ll, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513 / crca / aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark / name 120 to 300 v, power factor more than 0.9, thd < 10 %, cct 3000 k to 6500k, luminaire efficacy> 85 lumens / watt , led efficiency 110 lumens / watt led driver efficiency > 85 % cree / osram / philips lumileds / nichia / seoul / bridgelux make led used for luminaire. ( fitting required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) tube light with integral driver ( d ) 22 24 watts, surge 2kv, ip 20, 4 feet cat ll, supplying and erecting led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513 / crca / aluminium die cast powder coated and high u.v. & corrosion resistance with diffuser with company mark / name 120 to 300 v, power factor more than 0.9, thd < 10 %, cct 3000 k to 6500k, luminaire efficacy> 85 lumens / watt , led efficiency 110 lumens / watt led driver efficiency > 85 % cree / osram / philips lumileds / nichia / seoul / bridgelux make led used for luminaire. ( fitting required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) tube light with integral driver ( e ) 36 watts, surge 2 kv, ip 20, 4 feet cat ll, supplying and erecting led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm / w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics / lenses with company mark / name engraved or embossed 120 to 300 v, power factor more than 0.95, thd < 10 %, cct 3000 k to 5700k, uniformity ratio >0.45, luminaire efficacy> 100 lumens / watt . led driver efficiency > 85 %.cree / osram / philips lumileds / nichia / seoul / bridgelux ( u.s.a. ) make led used for luminaire. ( fittings required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) street light ( ip 65 ) , surge protection 4kv integral and 10 kv non integral , light must have 440vac line supply protection. it should withstand 48 hours for 440vac line supply. ( a ) 10 to 12 watts cat ll, supplying and erecting led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm / w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics / lenses with company mark / name engraved or embossed 120 to 300 v, power factor more than 0.95, thd < 10 %, cct 3000 k to 5700k, uniformity ratio >0.45, luminaire efficacy> 100 lumens / watt . led driver efficiency > 85 %.cree / osram / philips lumileds / nichia / seoul / bridgelux ( u.s.a. ) make led used for luminaire. ( fittings required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) street light ( ip 65 ) , surge protection 4kv integral and 10 kv non integral , light must have 440vac line supply protection. it should withstand 48 hours for 440vac line supply. ( b ) 15 to 24 watts cat ll, supplying and erecting led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm / w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics / lenses with company mark / name engraved or embossed 120 to 300 v, power factor more than 0.95, thd < 10 %, cct 3000 k to 5700k, uniformity ratio >0.45, luminaire efficacy> 100 lumens / watt . led driver efficiency > 85 %.cree / osram / philips lumileds / nichia / seoul / bridgelux ( u.s.a. ) make led used for luminaire. ( fittings required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) street light ( ip 65 ) , surge protection 4kv integral and 10 kv non integral , light must have 440vac line supply protection. it should withstand 48 hours for 440vac line supply. ( c ) above 24 to 36 watts cat ll, supplying and erecting led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm / w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics / lenses with company mark / name engraved or embossed 120 to 300 v, power factor more than 0.95, thd < 10 %, cct 3000 k to 5700k, uniformity ratio >0.45, luminaire efficacy> 100 lumens / watt . led driver efficiency > 85 %.cree / osram / philips lumileds / nichia / seoul / bridgelux ( u.s.a. ) make led used for luminaire. ( fittings required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( a ) street light ( ip 65 ) , surge protection 4kv integral and 10 kv non integral , light must have 440vac line supply protection. it should withstand 48 hours for 440vac line supply. ( d ) above 36 to 48 watts cat ll, supplying and erecting led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm / w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics / lenses with company mark / name engraved or embossed 120 to 300 v, power factor more than 0.95, thd < 10 %, cct 3000 k to 5700k, uniformity ratio >0.45, luminaire efficacy> 100 lumens / watt . led driver efficiency > 85 %.cree / osram / philips lumileds / nichia / seoul / bridgelux ( u.s.a. ) make led used for luminaire. ( fittings required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( b ) flood light ( ip 65 ) , surge 4kv, light must have 440vac line supply protection. it should withstand 48 hours for 440vac line supply ( a ) above 40 to 48 watts cat ll, supplying and erecting led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm / w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics / lenses with company mark / name engraved or embossed 120 to 300 v, power factor more than 0.95, thd < 10 %, cct 3000 k to 5700k, uniformity ratio >0.45, luminaire efficacy> 100 lumens / watt . led driver efficiency > 85 %.cree / osram / philips lumileds / nichia / seoul / bridgelux ( u.s.a. ) make led used for luminaire. ( fittings required lm 79 & lm 80 certificates ) ( note: below description have shown ranges of wattage capacity of led fittings.the engineer incharge may select any wattage capacity between the ranges shown. ) ( b ) flood light ( ip 65 ) , surge 4kv, light must have 440vac line supply protection. it should withstand 48 hours for 440vac line supply ( b ) above 48 to 60 watts cat ll, providing and erecting approved make double pole plastic switch and fuse 250v., 30a confirming to is erected on polished wooden block as directed., providing approved make double pole cast iron clad switch & rewirable fuse 240 / 250 v confirming to is. ( a ) 16a. cat.ii, providing approved make double pole cast iron clad switch & rewirable fuse 240 / 250 v confirming to is. ( b ) 32 a. cat.ii, providing approved make triple pole cast iron clad switch & rewirable fuse with neutral link 415 / 500 v confirming to is ( a ) 16 a cat.ii, providing approved make triple pole cast iron clad switch & rewirable fuse with neutral link 415 / 500 v confirming to is ( b ) 32 a cat.ii, providing approved make triple pole metal / iron clad switch & fuse with neutral link 415 / 500 v confirming to is ( a ) 63a cat.ii, providing approved make triple pole metal / iron clad switch & fuse with neutral link 415 / 500 v confirming to is ( b ) 100 a cat.ii, providing and erecting approved make panel mounting front fixing rotary switch ( cam switch ) with face plate with double pair of contacts with two fix and a moving contacts, operated by means of slide, rest on disk with grooves for sequential operation rotated by switch handle, square shaft and knob for two way with off ( i ) two pole ( a ) 16 / 25a 240 v, providing and erecting approved make panel mounting front fixing rotary switch ( cam switch ) with face plate with double pair of contacts with two fix and a moving contacts, operated by means of slide, rest on disk with grooves for sequential operation rotated by switch handle, square shaft and knob for two way with off ( i ) two pole ( b ) 32a 240v, providing and erecting approved make panel mounting front fixing rotary switch ( cam switch ) with face plate with double pair of contacts with two fix and a moving contacts, operated by means of slide, rest on disk with grooves for sequential operation rotated by switch handle, square shaft and knob for two way with off ( ii ) four pole ( a ) 16 / 25a 440v, providing and erecting approved make panel mounting front fixing rotary switch ( cam switch ) with face plate with double pair of contacts with two fix and a moving contacts, operated by means of slide, rest on disk with grooves for sequential operation rotated by switch handle, square shaft and knob for two way with off ( ii ) four pole ( b ) 32a 440v, providing and erecting approved make panel mounting front fixing rotary switch ( cam switch ) with face plate with double pair of contacts with two fix and a moving contacts, operated by means of slide, rest on disk with grooves for sequential operation rotated by switch handle, square shaft and knob for two way with off ( ii ) four pole ( c ) 40a 440v, providing and erecting approved make panel mounting front fixing rotary switch ( cam switch ) with face plate with double pair of contacts with two fix and a moving contacts, operated by means of slide, rest on disk with grooves for sequential operation rotated by switch handle, square shaft and knob for two way with off ( ii ) four pole ( d ) 63a 440v, providing and erecting following additional parts for panel mounting mccbs ( a ) extended operating rotary handle with pad lock with three position trip, off, on suitable for 25a to 250 a panel mounting cat iii, providing and erecting following additional parts for panel mounting mccbs ( b ) extended operating rotary handle with pad lock with three position trip, off, on suitable for 400a to 630 a panel mounting cat iii, supply of approved make iron clad or metal clad four pole change over switch 415v. confirming to is of following capacity ( a ) 16a cat. ii, supply of approved make iron clad or metal clad four pole change over switch 415v. confirming to is of following capacity ( b ) 32a cat. ii, supplying & erecting approved make four pole 415v change over switch interior for panel mounting with operating mechanism a.c.23 duty confirming to is for ( a ) 32 40a cat ll, supplying & erecting approved make four pole 415v change over switch interior for panel mounting with operating mechanism a.c.23 duty confirming to is for ( b ) 63 a cat ll, providing and erecting miniature circuit breaker single pole 6a to 25a suitable to operate on 240 v a.c. system and having breaking capacity 10 ka to be erected in existing box. confirming to is 8828 / 1996 with isi mark cat.ii, providing & erecting 240 v mcb double pole switch for motor & inductive load ( c curve ) having 10 ka breaking capacity & confirms to is : 8828 in existing box having following capacity ( a ) 6 to 32 amp.cat.ii, providing & erecting 240 v mcb double pole switch for motor & inductive load ( c curve ) having 10 ka breaking capacity & confirms to is : 8828 in existing box having following capacity ( b ) 40 amp. cat.ii, providing & erecting 240 v mcb double pole switch for lighting load ( b curve ) having 10 ka breaking capacity & confirms to is : 8828 in existing box having following capacity ( a ) 6 to 32 amp. cat.ii, providing & erecting 240 v mcb double pole switch for lighting load ( b curve ) having 10 ka breaking capacity & confirms to is : 8828 in existing box having following capacity ( b ) 40 amp. cat.ii, providing & erecting 415v mcb four pole switch for lighting load ( b curve ) having 10ka breaking capacity & confirms to is :8828 in existing box having following capacity ( a ) 6 to 32 amp.cat.ii, providing & erecting 415v mcb four pole switch for lighting load ( b curve ) having 10ka breaking capacity & confirms to is :8828 in existing box having following capacity ( b ) 40 amp.cat.ii, providing and erecting three pole miniature isolator a.c. 22 duty confirms to is 13947 3 in existing box. ( a ) for 40 amp. cat.ii, providing and erecting three pole miniature isolator a.c. 22 duty confirms to is 13947 3 in existing box. ( b ) for 63 amp. cat.ii, providing and erecting three pole miniature isolator a.c. 22 duty confirms to is 13947 3 in existing box. ( c ) for 100 amp. cat.ii, providing and erecting two way centre off four pole mcb change over switch ( is 13947 3 / iec 60947 3 ) in existing box. ( a ) for 25 amp. cat.ii, providing and erecting two way centre off four pole mcb change over switch ( is 13947 3 / iec 60947 3 ) in existing box. ( b ) for 40 amp. cat.ii, providing and erecting sheet steel powder coated mcb distribution board flush / surface mounted fitted with busbar, neutral link, earth bar and din rail, conforms to is 8623 1 & 3, iec 61439 1 & 3 without mcb to house appropriate nos. of mcbs. ( the dbs should be used of same company of mcb to be used ) suitable for ( b ) sheet steel double door ( ip 43 ) ( i ) 4 way, providing and erecting sheet steel powder coated mcb distribution board flush / surface mounted fitted with busbar, neutral link, earth bar and din rail, conforms to is 8623 1 & 3, iec 61439 1 & 3 without mcb to house appropriate nos. of mcbs. ( the dbs should be used of same company of mcb to be used ) suitable for ( b ) sheet steel double door ( ip 43 ) ( ii ) 6 way, providing and erecting sheet steel powder coated mcb distribution board flush / surface mounted fitted with busbar, neutral link, earth bar and din rail, conforms to is 8623 1 & 3, iec 61439 1 & 3 without mcb to house appropriate nos. of mcbs. ( the dbs should be used of same company of mcb to be used ) suitable for ( b ) sheet steel double door ( ip 43 ) ( iii ) 8 way, providing and erecting sheet steel powder coated mcb distribution board flush / surface mounted fitted with busbar, neutral link, earth bar and din rail, conforms to is 8623 1 & 3, iec 61439 1 & 3 without mcb to house appropriate nos. of mcbs. ( the dbs should be used of same company of mcb to be used ) suitable for ( b ) sheet steel double door ( ip 43 ) ( iv ) 12 way, providing and erecting sheet steel powder coated mcb distribution board flush / surface mounted fitted with busbar, neutral link, earth bar and din rail, conforms to is 8623 1 & 3, iec 61439 1 & 3 without mcb to house appropriate nos. of mcbs. ( the dbs should be used of same company of mcb to be used ) suitable for ( b ) sheet steel double door ( ip 43 ) ( v ) 16 way, providing and erecting approved make elcbs / rccbs conforming to is: 12640 and having sensitivity of 30 ma and short circuit withstand capacity of 10 ka and suitable for operation on single phase 240 v, 50hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following max. rating erected as directed ( i ) 25 amps.dp cat. ii, providing and erecting approved make elcbs / rccbs conforming to is: 12640 and having sensitivity of 30 ma and short circuit withstand capacity of 10 ka and suitable for operation on single phase 240 v, 50hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following max. rating erected as directed ( ii ) 40amps. dp cat. ii, providing and erecting approved make elcbs / rccbs conforming to is: 12640 and having sensitivity of 30 ma and short circuit withstand capacity of 10 ka and suitable for operation on single phase 240 v, 50hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following max. rating erected as directed ( iii ) 63 amps. dp cat. ii, providing and erecting approved make elcbs / rccbs conforming to is: 12640 and having sensitivity of 30 ma and short circuit withstand capacity of 10 ka and suitable for operation on 3 phase and neutral 415v, 50hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following max. rating erected as directed. ( i ) 25 amps.fp cat. ii, providing and erecting approved make elcbs / rccbs conforming to is: 12640 and having sensitivity of 30 ma and short circuit withstand capacity of 10 ka and suitable for operation on 3 phase and neutral 415v, 50hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following max. rating erected as directed. ( ii ) 40amps. fp cat. ii, providing and erecting approved make elcbs / rccbs conforming to is: 12640 and having sensitivity of 30 ma and short circuit withstand capacity of 10 ka and suitable for operation on 3 phase and neutral 415v, 50hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following max. rating erected as directed. ( iii ) 63 amps. fp cat. ii, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. ( a ) 2 core 2.5 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. ( b ) 2 core 4 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. ( c ) 2 core 6 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. ( d ) 2 core 10 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. ( a ) 4 core 2.5 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. ( b ) 4 core 4 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. ( c ) 4 core 6 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured aluminium cable 1.1 kv.grade to be erected as directed of following size. ( d ) 4 core 10 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( a ) 2 core 2.5 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( b ) 2 core 4 sq.mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( c ) 2 core 6 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( d ) 2 core 10 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( e ) 3 core 2.5 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( f ) 3 core 4 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( g ) 3 core 6 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( h ) 3 core 10 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( i ) 3 core 16 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( j ) 4 core 2.5 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( k ) 4 core 4 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( l ) 4 core 6 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( m ) 4 core 10 sq. mm, supplying & erecting xlpe ( is:7098 ) ( i ) 88 isi unarmoured copper cable 1.1 kv grade to be erected as directed of following size. ( n ) 4 core 16 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( a ) 3 core 2.5 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( b ) 3 core 4 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( c ) 3 core 6 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( d ) 3 core 10 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( e ) 3 core 16 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( f ) 3 core 25 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( g ) 3 core 35 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( h ) 3 core 50 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( i ) 3 core 70 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( j ) 3 core 95 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. ( k ) 3 core 120 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( a ) 3 1 / 2 core 25 sq. mm ( 16 sq. mm 1 / 2 core ) , providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( a 1 ) 3 1 / 2 core 35 sq. mm ( 16 sq. mm 1 / 2 core ) , providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( b ) 3 1 / 2 core 50 sq. mm ( 25 sq.1 / 2 mm core ) , providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( c ) 3 1 / 2 core 70 sq. mm ( 35 sq. mm 1 / 2 core ) , providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( d ) 3 1 / 2 core 95 sq. mm ( 50 sq. mm 1 / 2 core ) , providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( e ) 3 1 / 2 core 120 sq. mm ( 70 sq. mm 1 / 2 core ) , providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( f ) 3 1 / 2 core 150 sq. mm ( 70 sq. mm 1 / 2 core ) , providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( g ) 3 1 / 2 core 185 sq. mm ( 95 sq. mm 1 / 2 core, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand / solid aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( a ) 4 core 4 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand / solid aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( b ) 4 core 6 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand / solid aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( c ) 4 core 10 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand copper conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( a ) 2 core 2.5 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand copper conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( a 1 ) 2 core 4 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand copper conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( b ) 2 core 6 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand copper conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables ( c ) 2 core 10 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand / solid copper conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. ( a ) 4 core 2.5 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand / solid copper conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. ( a 1 ) 4 core 4 sq. mm, providing and erecting xlpe ( is:7098 ) ( i ) 88 isi armoured cable multistrand / solid copper conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. ( b ) 4 core 6 sq. mm, providing and erecting approved make ceiling fan with double ball bearing isi mark with condenser a.c. 23ov.50 c / s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [ make shall be approved by engineer in charge ] , providing & erecting approved make ceiling fan with double ball bearing isi mark with condenser a.c.230v 50c / s. 1400 mm. sweep complete, canopy erected on existing hook or clamp with earthing [ make shall be approved by engineer in charge ] , providing & erecting approved make ceiling fan with double ball bearing isi mark with condenser 230 volt a.c.50 hz 1200 mm sweep complete having 3 blades aluminium body and blade sets having ornamental design shanks , canopy erected with earthing. [ make shall be approved by engineer in charge ] , providing & erecting approved make ceiling fan with double ball bearing isi mark with condenser 230 volt a.c.50 hz. 1200 mm sweep complete having 4 blades aluminium body and blade sets having ornamental design shanks, canopy erected with earthing [ make shall be approved by engineer in charge ] , providing & erecting approved make ceiling fan with double ball bearing with condenser 230 volt a.c.50 hz. 900 mm sweep complete having 3 aluminium blades, canopy erected complete. [ make shall be approved by engineer in charge ] , supply, installation, testing and commissioning of suitable sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) permanent ferrite magnet motor, class of insulation: b, rust free 3 nos.aluminium blades, 2 nos. canopies, shackle kit with earthing provision, 22 gauge copper winding, power factor not < 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm, 230v ( tolerance as per is : 374 2019 ) , thd < 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree c ( max. ) , suitable for 140 to 285 voltage and rectifier circuit with surge, over current and overload protection , 50 hz, single phase ac supply, earthing etc. complete as required. [ make shall be approved by engineer in charge ] a ) 900 mm sweep ( a ) 900mmsweep ( 36" ) , supply, installation, testing and commissioning of suitable sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) permanent ferrite magnet motor, class of insulation: b, rust free 3 nos.aluminium blades, 2 nos. canopies, shackle kit with earthing provision, 22 gauge copper winding, power factor not < 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm, 230v ( tolerance as per is : 374 2019 ) , thd < 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree c ( max. ) , suitable for 140 to 285 voltage and rectifier circuit with surge, over current and overload protection , 50 hz, single phase ac supply, earthing etc. complete as required. [ make shall be approved by engineer in charge ] a ) 900 mm sweep ( a ) 1200 mm sweep ( 48" ) , supply, installation, testing and commissioning of suitable sweep, bee 5 star rated, ceiling fan with brush less direct current ( bldc ) permanent ferrite magnet motor, class of insulation: b, rust free 3 nos.aluminium blades, 2 nos. canopies, shackle kit with earthing provision, 22 gauge copper winding, power factor not < 0.9, service value ( cmm / w ) minimum 6.85, air delivery minimum 215 cmm, 350 rpm, 230v ( tolerance as per is : 374 2019 ) , thd < 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree c ( max. ) , suitable for 140 to 285 voltage and rectifier circuit with surge, over current and overload protection , 50 hz, single phase ac supply, earthing etc. complete as required. [ make shall be approved by engineer in charge ] a ) 900 mm sweep ( b ) 1400 mm sweep ( 56" ) , supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in rpm [ a ] 305 mm dia 900 rpm cat.ii, supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in rpm [ b ] 380 mm dia 900 rpm cat.ii, supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in rpm [ c ] 380 mm dia 1400 rpm cat.ii, supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in rpm [ d ] 450 mm dia 900 rpm cat.ii, supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in rpm [ e ] 450 mm dia 1400 rpm cat.ii, supplying and erecting approved make bracket fan of 230 volt, a.c. 50 cy / s., 400 / 450 mm sweep complete erected on wall or with lead cores and connections complete. cat.ii, supplying and erecting approved make window type air conditioning machine comprising of hermetically sealed rotary compressor, condensing & evaporating unit, fan / blower motor, thermostat, relay, remote hand sets etc suitable for ( a ) for 3 star rated ac machine ( a ) 1 ton capacity, supplying and erecting approved make window type air conditioning machine comprising of hermetically sealed rotary compressor, condensing & evaporating unit, fan / blower motor, thermostat, relay, remote hand sets etc suitable for ( a ) for 3 star rated ac machine ( b ) 1.5 ton capacity, installation charges for window type air conditioning machine by making modification to the window, if necessary by providing wooden frame made of solid wood of good quality polished for proper support of the unit blocking the side opening if any, around the unit, but within the window frame by asbestos cement sheet or hard wood from inside and outside placing the unit inside the frame and starting the unit complete with necessary painting., installation charges for wt ac in existing window opening with minor civil work covering of opening., providing and erecting approved make split air conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing, drain pvc pipes suitable for ( cost includes powder coated stand, eco friendly green gas charging, 15a plug top & remote control ) with necessary core cutting. for 3 star rating of current year [ a ] for 1 ton capacity, extra charges for the refrigerant piping, cabling & drain piping beyond standard length. for ductable a.c. machine 18 gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc. without insulation for liquid line.. [ a ] for 5.5 tr 5 / 8" outdoor copper pipe, extra charges for the refrigerant piping, cabling & drain piping beyond standard length. for ductable a.c. machine 18 gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc. without insulation for liquid line.. [ b ] for 8.5 tr 7 / 8" outdoor copper pipe, extra charges for the refrigerant piping, cabling & drain piping beyond standard length. for ductable a.c. machine 18 gauge hard drawn copper pipe including necessary fittings i.e. elbows, couplings, reducers etc. without insulation for liquid line.. [ c ] for 11.tr 1.1 / 8" outdoor copper pipe, replacing fan motor capacitor 6 mfd by new for a.c.machine, replacing unserviceable thermostat switch by new denfoss or approved make thermostat switch having temp. range 15 to 30 c. for a.c.machine., replacing starting capacitor of 80 to 120 mfd for 2.5 h.p. compressor motor for a.c.machine., replacing unserviceable starting capacitor of 100 to 120 mfd for 2.5 h.p. compressor motor for a.c.machine., replacing unserviceable running capacitor of 36 mfd for 2.5 h.p. compressor motor for a.c.machine., replacing the overlode protector for compressor motor winding if temp. exceeds 240 f with a time lag of 10 sec. suitable for 1.5 ton a.c.machine, replacing compressor starting relay by new on having pick up voltage suitable for 1.5 ton a.c.machine., replacing copper capillary tube of 0.064†board and 30†length for 1.5 ton a.c.machine., replacing air filter for a.c.machine pvc / nylon, replacing air filter for a.c.machine coired, replacing wheel blower suitable for a.c.machine, rewiring the entire window type a.c.machine with 2.5mm 2 flexible copper core and putting the same in working order., removing the defective compressor for the a.c.machine by disconnecting the suction and discharge line., erecting the new factory repaired compressor on the foundation of the window type a.c.machine with necessary sundry materials and reconnection the suction and discharge line with compressor., flushing the line leak testing, leak stopping vacuuming, dehydrating and charging the gas in the refrigeration system for a.c.machine, overhauling and servicing the window type a.c.machine by cleaning the condenser, cooling coil etc. by blower and oiling the fan motor and cleaning all necessary parts and putting the machine in working order., providing and erecting g.i.sheet housing of a.c.machine with fabricating and painting complete. 18 gauge, providing and erecting g.i.sheet housing of a.c.machine with fabricating and painting complete. 16 gauge, replacing the fan blade for a.c.by new one, replacing the old grill by supplying and erecting new grill for a.c.machine., replacing old and unserviceable rotary / selsctor switch by new 14 a four to five position 250v rotary switch for a.c.machine, spil a / c universal handset new ( remote ) , replacing for 36 mfd running capacitor new, flexible wire 23 / 36 tin copper ( 100 yard length ) , flexible wire 40 / 36 tin copper ( 100 yard length ) , pvc tape roll 10 mtr. length, single way switch 5a / 250v, single way switch 15a / 250v, three pin plug 5a / 250 v, three pin plug 15a / 250 v, three pin top 5a / 250v, three pin top 15a / 250v, batton holder backlite 5a, angele holder backlite 5a, padent holder backlite 5a, tube choke polyester 40 w, tube starter 40 w, tube holder pair lock or roter, celling rose 5a / 250v, fan capacitor, fan condenser 2.5 mm, lamp 40 w 230v, lamp 60 w 230v, sodium vapour lamp thread type 50 v, piano type switch 5a / 250v, 1.5 mm pvc wire copper, 4 mm pvc wire copper, 1 square mm single pvc wire copper, box type tube fitting 40 w signal tube chocke fitting etc.comp 4 ft. long, car main switch 30a / 250v, bare copper wire 10 no., mercury lamp 80 w, mercury lamp 125 w, tube rod 40w, fan regulator, five in one 15 amp with gang box, 3 core 2.5 mm 40 / 36 copper plate cable for submersible pump, led street light ( 14 w ) , led street light ( 24 w ) , led street light ( 36 w ) , led street light ( 48 w ) , flushing the line, leak testing, leak stopping, vacuuming, dehydrating and charging the gas in the refrigeration system for a.c. machine up to 2 tr...

Western Railway - Gujarat

38530877 supply of self aligning ball bearing repl ( bt type ) pt. no. a6208 drg. no. std 430045p1203, suitable for repl ( bt type ) tap changer [ warranty period: 30 months after the date of delivery ] ...

Western Railway - Gujarat

38421543 supply of srdg ball bearing for bearing of mvmt ( old motors ) make skf 6312 with c3 clearance or equivalent rdso approved brands for auxiliary machine bearing including 3 phase locomotive / emu [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

38408300 supply of ls11 ball bearing having outside diameter 63.482 mm, bore 28.575 mm, width 15.875mm of nbc make or of flt / skf / fag / tata make having similar quality. only oem or authorised distributor / authorised dealer / authorised stockist can quote. => limited...

Western Railway - Gujarat

38377076 supply of for diesel depot : ball bearing 6305 2rs1 or 2rsh. accepted make skf / fag imported ( european origin ) or nsk / japan. ( for ac fuel pump motor , ac crank case exhauster motor and ac cyclonic filter dust exhauster blower motor. ) . [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

38376034 supply of single row deep groove ball bearing skf 6304 with c3 clearance or equivalent rdso approved brands for auxilliary machine bearing including 3 phase locomotive / emu [ warranty period: 30 months after the date of delivery ] amm ( dl ) vta , wr gujarat 60.00 numbers => limited...

Western Railway - Gujarat

38354974 supply of digital anemometer the portable anemometer provides fast accurate readings with digital readability and the convenience of a remote sensor separately. *multif​ unctions for air flow measurement: m / s, km / h, ft / min, knots. *low friction ball bearing design resulting in accuracy at both high and low velocities. *conventional twisted vane arms, always a source of unreliability have been eliminated. *data hold. *compact housing cabinate. *wide applications: use this anemometer to check air conditioning & heating systems, measure air velocities, wind speeds, temperature...etc. [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

38318575 auction sale of scrap all type of bearings of non ac icf 4.5 kw alternator ( bearings assembles and in parts with / without inner race / outer race / roller or ball seprator / rollers or balls with minor nf attachment ) ( approx weight of 1 nos ball bearing 0.85 kg & 1 nos roller bearing 1.14 kg ) , total lot qty 2 mt, location opp. coach lowering section of bg worshop bvp. mode of delivery in weight. custodian sse [ scrap ] bvp, loading by purchaser, fdp 50 days...

Western Railway - Gujarat

38186893 supply of double groove ball bearing, skf no.4306 atn 9 or similar. rdso approved brand for auxiliary machine bearings including 3 phase locomotives and emus [ warranty period: 30 months after the date of delivery ] => limited...

Gujarat State Petronet Limited - Gujarat

38173479 arc for maintenance of jobner, hissar, bhatinda and rohtak base. fixed cost 1 repair, maintenace, supervision, monitoring of pipeline sections under jobner, hissar, bhatinda and rohtak base ( appx. 577 kms ) including all activities related to mechanical / electrical / instrumentation / hse / civil works / other miscellaneous work. the scope of work related to mainline maintenance activities include maintaining equipments as per sow and maintenance of pipelines and also all rcps, hovs, movs station etc. falling under jobner base, hissar base and rohtak base as mentioned in scope of work & its annexures. mechanical 1 installation of above ground valves ( ball / globe / check ) of various sizes in piping system including handling, blind removal providing temporary supports if necessary, studs bolt loosening / tightening, gasket insertion and torque setting with all tools / tackles / manpower etc. of valves sizes, hydra and other lifting equipment inclusive of scaffolding arrangement at site if required including valve operation. gasket shall be provided by gigl. 2’’nb 4’’nb 6’’nb 8’’nb 10nb 12’’nb 2 dismantling of valves ( ball / globe / check ) from the line and putting blinds / spool pieces etc., for various pipe sizes etc. including stud bolt loosening, gasket changing, handling with all tools / manpower / tackles / hydra and other lifting equipment inclusive of scaffolding arrangement at site if required etc. of valves sizes. gasket shall be provided by gigl. 8’’nb 10nb 3 dismantling or installation of blind flanges from a / g piping for various pipe sizes including nut bolt removing & handling with all tools / tackles / manpower / machinery & consumables etc. and stacking all within radius of 250 mts as per gigl eic instructions. from 3 to 6 from 8 to 12 4 reversal of spectacle blind on installed a / g piping for various sizes etc. including nut bolt loosening, gasket changing with all tools / tackles / manpower etc. of valves sizes: 10 nb 12 nb 16 nb 18 nb 30 nb 5 dismantling of piping spool along with flanges from line for various pipe sizes and putting blind including nut bolt removing & handling with all tools / tackles / manpower / machinery etc and stacking all within station as per owner eic instructions. ( no separate charges shall be paid extra for manpower & equipments used ) up to 4’’ nb 6’’ nb 8’’ nb 10 nb 12 nb 6 installation of piping spool along with flanges for various pipe sizes including blind removal, nut bolt removing & handling with all tools / tackles / manpower / machinery etc as per owner eic instructions. ( no separate charges shall be paid extra for manpower & equipments used ) up to 4’’ nb 6’’ nb 8’’ nb 10 nb 12 nb 7 replacement by removing old gaskets including tightening and loosing of flanges with all tools / tackles / manpower / machinery etc as per owner eic instructions. gasket shall be provided by owner at designated store. up to 4’’ nb 6’’ nb 8’’ nb 10 nb 8 re conditioning of coating of underground gas pipeline after locating the pipeline ( in the scope of the contractor ) by suitable method ( pipeline locator / trial pit method / pipeline markers etc ) as per the coating fault. the activity includes ( a ) excavation to expose the line to suitable depth to expose the pipeline and provide working space around the pipeline. ( b ) removal of existing coating by using scrappers etc. and cleaning the surface to fine finishes by power brush / suitable method. ( c ) rectification of coating of the defects by heat shrinkable / ray chem after surface preparation by mechanical cleaning, primer application, wrapping of tape, edge preparation, holiday test etc. ( d ) r 95 epoxy application, if required ( e ) back filling the trenches and restoring the fields to the satisfaction of owner. cleaning rou of any debris etc. ( f ) the supply of all consumables, utilities, equipment, and all manpower required, pipe cleaning and surface preparation, repairing of coating defects ( resulting in holiday in coating ) and testing including all handling, transportation, etc. included in this schedule of item. ( g ) any crop compensation to the land owner / farmers shall be in the scope of owner. ( no separate charges shall be paid for manpower, consumables, equipments, tools used for this activity ) raychem make tape r 95 epoxy heat shrinkable sleeve coating repair perp htlp 80 coating repair filling material mastic 9 supply and mobilization of nitrogen gas of commercial grade in loose cylinder / banks of individual cylinder capacity 7m3 at a pressure of 150 kg / sq cm with all connecting hoses and de mobilization after completion of job including loading, unloading, handling cylinder pressure regulator and pressure gauge with accessories. no separate charges shall be paid for manpower, tools & tackles, lifting equipments used during this activity. charges of nitrogen qty shall be considered per nos of cylinders supplyed by arc contractor. 10 supply, transportation, fabrication and erection of ms structural steel section of various sizes along with required fasteners ( plate, angle, tee, channel, beam, pipe etc ) to suit the requirement. rate also includes the surface cleaning by a suitable method, supply and application of two coat of high build chlorinated rubber / zinc phosphate primer and two coats of finished paint of epoxy of grey colour / colour as specified by gigl of approved make, the job is to be executed as per the direction of the gigl e.i.c. & gigl requirement. job inclusive of labour, machinery etc. ( no separate charges shall be paid for transportation of fabricated structure, manpower, equipments used during execution of this activity ) 11 surface preparation of installed ( operational ) piping / spool / fittings, steel structural surfaces by bristle blaster machine or other proper methods ( paint rust remover equipment ) with equipments, accessories, manpower, material etc upto required surface finish. the work also includes painting of piping spool including supply of paint and application of 2 coats of red oxide primer or high build chlorinated rubber / polyurethane / zinc phosphate ( as per site condition ) of 70 micron each and 2 coats of high build epoxy finished paint of golden / cannery yellow / any applicable colour instructed by gigl with 70 micron each of approved quality including stencilling, tagging, direction arrow and other lettering as per gigl eic. this includes covering of using masking tape during surface preparation and painting works. 12 surface preparation of new piping / spool / fittings, steel structural surfaces britstle blaster machine or blasting methods. finish of surface quality sa 2 ½ and roughness 60 microns minimum by providing shot / sand of approved quality, shot / sand blasting equipments & its accessories, manpower, material etc. the job also includes painting of piping spool including supply of paint and application of 2 coats of red oxide primer or high build chlorinated rubber / polyurethane / zinc phosphate of 70 micron each and two coats of high build epoxy finished paint of golden / cannery yellow / any applicable colour instructed by gigl with 70 micron each of approved quality including stenciling of line numbers, pipe tagging, flow direction arrow, other lettering as found condition of pipeline as per instruction of gigl eic. this includes covering of nut bolts using masking tape, during surface preparation & painting works. 13 complete job of repairing the leakage of existing buried pipeline by using leak repair clamps & other accessories related to clamp. the activity shall include all necessary arrangements, excavation & backfilling work, material transportation and other works required for leak arrest and restoration of site. land and corp compansation will be in gigls scope. clamps will free issued by gigl 2 4 6’’ 10 12’’ 16” 18’’ 30” 14 complete job of repairing the leakage of existing above ground piping by using leak repair clamps. manpower, equipments and material shifting to site shall be in scope of contractor.restoration of above ground piping as per original conditions. clamps will free issued by gigl 2 3 4 6’’ 8’’ 10 12’’ 16” 18’’ 30” 15 emergency repair of leaking underground pipe by replacement by pipe spool, or fully encircled sleeve welded on pipe: this work shall include transportation of pipes and associated materials from store locations, loading / unloading of the line pipes to the site, hydrotest of pipes, excavating the trench for finding out the leakage in the existing line burst portion of point ( this excavation also includes the excavation for replacement of pipe upto max. 12 meter ) , dewatering and cleaning of pit or trench, and to make it free from fire / accident etc., cutting the line from both ends ( upto one pipe length item, approx 12 mtr. or part thereof shall be treated as one job ) surface and bevel preparation dp checking & welding the pipe of the required length on the line, ndt ( radiography, ut, dp ) coat and wrap, holiday testing and back filling the same etc. complete the work as directed by e.i.c. contractor to arrange all necessary equipment, consumables, manpower etc to complete the job. ( pipes shall be supplied free of cost by gigl at designated store ) ( nitrogen purging for the section if required to be claimed seaprately as per sor. ) fully encircled sleeve shall be free issed by gigl. 4 12’’ 16” 18’’ 30” 16 repair of metal loss on pipeline at third party damage locations / corrosion / less thickness locations by composite sleeve ( clock spring ) . the job includes excavation & restoration , clearing of pit, dewatering, removal of coating, preparation the pipe surface to put sleeve. the job also includes the supply of coating materials & repair of damaged coating, holiday testing and, back filling with soft soil and final cleanup to restore the field to its original conditions. paut / ut for anomaly assessment at damaged location before application of composite wrap shall be in the scope of contractor. land and corp compansation will be in gigls scope. it is considered that sleeve width will be 300 mm std. ( scope of supply of sleeve, is in the scope of contractor ) 4 12’’ 16” 18’’ 30” 17 repair of flange / rtd thermowell / ij / valves body at leakage portion or less thickness locations by supply and application of nicco fermanite clamp or any other leak clamp which can be installed on line and injecting sealing material. the job includes cleaning of flange / rtd thermowell / ij / valves, installation of nicco fermanite clamp or any other leak clamp which can be installed on line and injecting sealing material on pipes. the job includes the painting of pipeline / flange / rtd thermowell / ij / valves and restore the field to its original conditions. the job includes man power, transportation and other resources. this job shall be carried out by certified oem / vendor only. upto 2’’ 2 to 4’’ 6’’ 8’’ 10’’ 18 hydrostatic testing of clean agent cylinder ( fm200 / fk 1 2 3 ) / co2 flooding cylinder as per latest gas cylinder rules from authorized agency / vendor. hydro testing of cylinders to be carry out with high pressure hose pipe, calibrated pressure gauge, suitable manifold with fittings and any special requirement. dismantling, loading, unloading, to and fro transportation, refilling and re installation all inclusive. no separate charges shall be paid for manpower, consumables, lifting equipments, tools & tackles used during execution of this activity. co2 flooding cylinder water capacity: 68 ltr clean agent ( fm200 / fk 1 2 3 ) gas cylinder water capacity: 80 ltr 19 fabrication and installation of above ground piping of grade astm a333 gr.6 / api 5l & equivalent grade of different schedule including, handling, aligning, cutting, beveling / edge preparation, installation of associated fittings / flanges, fit up, tie in, welding, radiography , ut, dp / mpt, transportation of fabricated spool to location, temporary supporting, erection of different size of fabricated aboveground piping at all elevations including handling, etc. the job includes carrying out hydrostatic testing as per gigl approved procedure of completed piping loop / piping system as approved by owner / owner’s representative to the specified pressures, providing all testing equipments / instruments / accessories, blind etc. including pressure recorder, temperature probe, temperature recorder. dewatering, cardboard blasting surface preparation & painting of spool after successful completion of hydro testing and pneumatic testing is also including in scope. ( pipe / pipefittings shall be issued by gigl at designated store. ) as built drawing of the installation shall be included in the scope of bidder. pipe wall thickness ranging upto 6.4 mm pipe wall thickness ranging from 6.4 mm– 8.56 mm pipe wall thickness ranging from 8.57 mm– 17.4 mm pipe wall thickness ranging from 17.5 mm– 32 mm    pqr laboratory charges for 2” wps pqr laboratory charges for 4” wps pqr laboratory charges for 8” wps pqr laboratory charges for 12” wps pqr laboratory charges for 18” wps    eqt for 24 mm ms plate ( smaw ) including laboratory charges eqt for 24 mm ms plate ( gtaw ) including laboratory charges eqt for 16 mm ms plate ( smaw ) including laboratory charges eqt for 16 mm ms plate ( gtaw ) including laboratory charges ndt charges for 2” wps ndt charges for 4” wps ndt charges for 8” wps ndt charges for 12” wps ndt charges for 18” wps ndt charges for eqt ( 24 mm plate ) ndt charges for eqt ( 16 mm plate 20 hydrostatic testing of double length line pipe ( approx. 24 meter ) at max. pressure of 150 brag. job includes arrangement of header / dish end ( end cap ) for installation of calibrated pressure gauge, water inlet, drain, vent; welding, ndt, cutting, bevelling and edge preparation after testig job. submission of report after completion of hydrotest.this includes loading / unloading of linepipe, header / disc end preparation, tools, tackels, water, pump, corrosion inhibitor, equipment, manpower, etc. required for execution of job. 12nb 16nb 18nb 30nb 21 gas cutting, grinding and welding of edges of chequered plate installed in cable trenches, valve pit etc. including handling. the job inclusive of all consumables, equipments, tools, labour etc. 22 supply and installation of chequered plate of required size for trenches, platforms etc including application of red oxide primer and two coats of finish paint of approved quality. ( no separate charges shall be paid for gas cutting, grinding & welding of edges of chequered palte & transportation of the same ) the job inclusive of all consumables, equipments, tools, labour etc. 4 mm thick 6 mm thick civil 23 earth work in excavation below ground level for all kinds of work in basements, foundations, including trenches etc. including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 1 km, as decided including providing temporary supports to existing service lines like water pipes sewage pipes, electric overhead and underground cables etc. all complete, including shoring and strutting. no separate charges shall be paid for manpower, consumables, equipments, handling, tools & tackles used during execution of this activity. soft soil upto 2.5 meter below 2.5 meter hard rock upto 3 meter 24 back filling of available excavated earth ( excluding rock ) or filling loose earth other than black cotton soil in trench, sides of foundation etc in layers not exceeding 20 cm in depth consolidating earth deposited layer by ramming and watering and filling up to required ground level. no separate charges shall be paid for manpower, consumables, equipments, handling, tools & tackles used during execution of this activity. 25 ( a ) supplying and filling selected loose earth other than black cotton soil from borrowed pits in the washout / depressed land or in the pit locations of pipeline row compacting upto 90% of proctor density and filling in layers not exceeding 200 mm including cost of transportation, spreading, compacting, all as directed by engineer in charge. the rates includes royalty or any other levies by govt. agencies towards taking of loose earth from borrowed area as per the direction of engineer in charge / site engineer inclusive all labour, materials, tools, tackles, transportation, taxes etc. completion all respect. ( payment shall be made on basis of measurement of the pit profile of the earth washout in the row or uncompacted loose soil supply ) 26 filling, in foundation and plinth ( under floors ) , with good quality coarse river sand, obtained from outside, including watering, ramming well, consolidating and dressing etc. complete, as directed. 27 breaking of pcc by using mechanical breaker / hammer / manually / abrasive cutting machine and disposal of the demolished materials within a lead of 1km. no separate charges shall be paid for manpower, consumables, equipments, handling, tools & tackles used during execution of this activity. 28 breaking of rcc by using mechanical breaker / hammer / manually / abrasive cutting machine and disposal of the demolished materials within a lead of 1km. including stacking of steel bars and disposal of unserviceable material within 1km lead. no separate charges shall be paid for manpower, consumables, equipments, handling, tools & tackles used during execution of this activity. 29 demolishing brick work in cement mortar ( with plaster on both face ) including staking of serviceable materials and disposal of unserviceable material within 1km lead including transportation / labour etc. 30 providing and laying masonry work in foundation / superstructure using class 5 brick with cement mortar 1:6 ( 1 cement: 6 coarse sand ) as per specifications in one or more brick thickness and in any standard shape ( excluding circular / curved ) including providing recesses, opening, scaffolding, staging, curing, finishing the joints flush below ground level and raking out joints in and above plinth level etc. all complete. at all depths below and upto 4.0 mtr. from ground level at all heights above 4.0 mtr. from ground level 31 12mm thick plaster in 1:4 cement mortar, providing & applying finish cement plaster at all heights, levels and places, including scaffolding, chipping, roughing up the concrete , curing and finishing . no separate charges shall be paid for manpower, consumables, equipments, scaffolding, handling, tools & tackles used during execution of this activity. 32 100 mm thick gravel filling : supplying, stacking and spreading of stone aggregate of size 40 mm to 63 mm with layer of sand and 250 micron thick hm hdpe grade i film ( conforming to is:10889 ) at desired locations inside the process area over well compacted earth complete as per owner construction drawing and as directed by engineer in charge. 33 supply, transportation and installation of tp / warning / arial / k.m. / ofc marker on pipeline rou including supply of all materials for fabrication, cleaning, two coats of red oxide and two coats of zebra colour ( black and golden yellow strips ) of approved quality ( i s i mark ) paint and marking the number, direction, chainage and pipe size. excavation upto required size, grouting in 1:3:6 pcc mixture to correct line, level and direction, back filling & restoration. the work is to be executed as per drawing and direction e.i.c. no separate charges shall be paid for manpower, consumables, transportation, lifting equipments, handling, tools & tackles used during execution of this activity. for normal soil for rocky areas 34 providing, mixing and laying pcc grade of 1:3:6 nominal mix using 40 mm and downgraded coarse aggregate for any thickness below footings, plinth beams, foundations, trenches, pits & sumps etc. using ordinary portland cement, curing etc., complete as per drawings, specifications and as directed by eic. centring & shuttering is also in the scope. no separate charges shall be paid for manpower, consumables, equipments, handling, tools & tackles used during execution of this activity. 35 providing reinforcement ( hysd bars ) for rcc work including bending, binding and placing in position complete as per standard isi 422 part 1. transportation, loading, unloading & handling of materials to site are included. no separate charges shall be paid for manpower, consumables, lifting equipments, handling, tools & tackles used during execution of this activity. 36 providing rcc work m20 1:1.5:3 ( 1cement, 1.5 coarse sand , 3 graded stone aggregate size 20mm nominal size ) in support, foundation, footing, pavements, floors etc. this job includes providing centering and shuttering, strutting, propping and removal of form with all tools / tackles / labour / machinery etc. charges of hysd bars shall be paid as per relevant sor. 37 washout repair job on existing buried pipeline, which occur mostly during monsoon period: ( a ) supplying and filling selected loose earth other than black cotton soil from borrowed pits in the washout / depressed land or in the pit locations of pipeline row compacting upto 90% of proctor density and filling in layers not exceeding 200 mm including cost of transportation, spreading, compacting, all as directed by engineer in charge. the rates includes royalty or any other levies by govt. agencies towards taking of loose earth from borrowed area as per the direction of engineer in charge / site engineer inclusive all labour, materials, tools, tackles, transportation, taxes etc. completion all respect. ( payment shall be made on basis of measurement of the pit profile of the earth washout in the row or uncompacted loose soil supply ) ( b ) filling empty cement bags of 50 kg capacity ( the bags to be used in good condition only ) by using sand / cement mixture in 1:10 ratio and stitching by using jute threads and placing in position in row as directed by engineer in charge / site engineer. 38 water body bank protection: construction of gabions structures by providing & making gabion structure with mechanically woven double twisted hexagonal shaped wire mesh gabion boxes as per is 16014:2012, morth clause 2500, of required size, mesh type 10x12 ( d=100 mm with tolerance of ± 2% ) zinic+pvc coated, mesh wire diameter2.7 / 3.7mm, mechanically edged / selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2 / 3.2mm ( id / od ) , supplied @3% by weight of gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of engineer incharge. 39 supply and installation of 1 upvc water pipeline in control room building / terminal at damaged locations 40 supply and installation of ofc pit of rcc along with cover, no separate charges shall be paid for transportation, excavation, backfilling, manpower & equipments including jcb. 41 supply and installation of hdpe conduit for the fiber along with hdpe couplers. no separate charges shall be paid for manpower, transportation & equipments used during this activity. hdpe couplers hdpe conduit of 50 mm dia 42 restoration or installation of pipeline makers ( either supplied by gigl or fallen ) , the job includes supply and transportation of all materials required to complete the restoration or installation works including excavation, fixing of pipeline marker on pipeline rou in pcc 1:3:6 to correct line & level, restoration etc. complete job as per specification and direction of e.i.c. 43 painting, numbering & lettering of existing pipeline markers including supply of paint and application of 2 coats of red oxide primer and 2 coats of zebra strip ( black and golden yellow stripes ) of approved quality to give an even shade after proper scraping of existing paint and clearing of surface free from foreign materials. the rate are including man / material and transportation to the position / site. direction marker warning marker k.m. marker aerial marker ofc marker tlp 44 providing stone pitching average 230 250mm thickness with the joints filled up with cement mortar of 1:6. including preparation of the bed slope, cutting and filing earth, compacting to the 90% of proctors density, filling the joints with 1:6 cement mortar pointing the joints with same mortar complete in all respects including the supply of stone boulders, all materials, labour and consumables etc. as directed by engineer in charge and as per the specifications. 45 removing of damaged / settled paver blocks and relaying of shot blasted interlocking / non interlocking colored paver blocks of high density 80 100 mm thick m 30 grade for footpath, parking areas, service lanes and other areas as mentioned in the drawing. including providing and laying 50 to 80 mm thick average bedding layer of coarse sand below paver block as per required grading and specification. laid paver block shall be mechanically compacted. the work of the paving blocks shall be executed in line and level by skilled mason of flooring work only. it should be laid in such a way that the no cutting of the paver block to be necessary. cutting of paver block by machine cut only and laying to be done by skilled flooring mason. the finished surface of the paver block shall have coarse sand texture finish. paver blocks shall be compacted and shall be re laid if necessary. 46 providing and laying shot blasted interlocking / non interlocking colored paver blocks of high density 80 100 mm thick m 30 grade for footpath, parking areas, service lanes and other areas as mentioned in the drawing. including providing and laying 50 to 80 mm thick average bedding layer of coarse sand below paver block as per required grading and specification. laid paver block shall be mechanically compacted. the work of the paving blocks shall be executed in line and level by skilled mason of flooring work only. it should be laid in such a way that the no cutting of the paver block to be necessary. cutting of paver block by machine cut only and laying to be done by skilled flooring mason. the finished surface of the paver block shall have coarse sand texture finish. paver blocks shall be compacted and shall be re laid if necessary. 47 providing and fixing kerb stones 150 mm thick and 450 mm wide chisel dressed cut stones fixed in cc 1:3:6 ( block size 450x300x150mm ) including cost of excavation, backfilling, pcc bed ( 1:3:6 ) , etc. 48 providing, laying, spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm ) to wet mix macadam ( wmm ) specification including premixing the material with water at omc in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of engineer in charge. 49 supplying & filling approved 230 mm thk. rubble soling with the use of excaveted materials and as approved by consultant / client. including filing voids by sand and stone chips, flooding with water, etc. complete inclusing all types of labours, tools / tackles, consumables ( sand, approved excavated rubbles and others required to complete the entire job ) , compaction by mechanical means / manual method to the satisfaction of consultant / client etc. complete. the rate is inclusive of carting of all materials from any distance of stacked yard to the location of placement. for measurement, plan area of work done only is to be considered as per drawing or actual, whatever is less. 50 chained link fencing supplying & fixing in position 1.20 meter high galvanised iron chain linked fencing of minimum 8 gauge of mesh size 75mm and galvanised concertina. the diameter of the steel wire for chain link fencing shall not be less than 12 gauge and the chain link has to be fixed with 65x65x6 ms angle fixed at every 3m interval with pcc 1:3:6, 0. 30 m x 0. 30 m x 0.45 m depth with necessary excavation, pcc, 2 coats of painting over one coat of primer all as per drawings. 65x65x6 ms angle struts to be provided at corners and at distance of 30 mtr c / c. electrical 51 dismantling and taking out of submersible pump motor from bore well, retaining and rolling of power cable pulled out from bore well. and reinstallation of repaired motor and associated assembly back into the bore in complete working condition. the rate for repairing of damages in the system shall be paid as per list below. all the tools tackles, manpower, tripod, fasteners etc. required for the job is included in the scope. up to 5 hp from 5.1 hp to 10 hp bushing / bearing replacement rectification / replacement of mechanical damage of pump rewinding of motor flat strip cable supply and installation of pump pipe upvc / gi class c of required diameter a ) 1 b ) 2 52 repairing & installation of bore well starter three phase starter should be with in built over load tripping feature. up to 5 hp 5.1 to 10 hp 53 replacement of concrete / ms plate covers of earth pits by hinged acrylic covers with locking / bolting facility & with facility to change testing date. the related modifications of masonry works of earth pits shall be in the scope of the contractor. 54 supply and replacement of lamps / fixture ( bajaj / philips / cg / osram / ge make or other makes as per the gigl / gspl vendor list ) including scaffolding, men, machinery if required as per eic led 18w tube light 50 w led exd type battery room 20 w led double fluorescent tube light fitting led 36w / 40 w recessed type 70 w led street light 100w led flood light exd 180w led flood light 45w led 12 / 18 w led recessed type high mast light flood type 350 / 360w led weather proof 150w led flood light 55 supply and replacement of ballast / driver / choke for led ( bajaj / philips / cg / osram / ge make or other makes as per the gigl / gspl vendor list including scaffolding, men, machinery if required as per eic. ( all ballasts / drivers to be industrial grade ) 50 w led exd type battery room led 36w / 40 w recessed type 70 w led street light 100w led flood light exd 180w led flood light high mast light flood type 120w / 240w / 350w led high mast light flood type 120w led 45w led weather proof 150w led light 56 maintenance of high mast repairing of motor rope assembly locking system repairing of motor electrical lift rope assembly electrical lift locking system electrical lift 57 supply and installation side hinged smc frp based pole mounted junction box for street light / flood lighting pole for below mentioned size of approved make like sintex. size 250 mm x 200 mm x 105mm size 300 mm x 200 mm x 105 mm 58 supply and installation of 45w led post top lanterns of approved make as per the gigl / gspl vendor list for gate lighting with ip 54 protection, complete with lamp and gear box and all accessories. 59 rewinding of the following motors pump ( single phase / three phase ) . work includes removal of the equipment, rewinding & repairing, re installation of the same. ( including replacement of bearing, required cable ) .no separate charges shall be paid for manpower, consumables, equipments, bearings, tools & tackles used during execution of this activity. ceiling fan pump of 2.0 hp pump of upto 1.5 hp bushing / bearing replacement exhaust fan heavy duty up to 140w exhaust fan heavy duty explosion proof iia & iib up to 0.33 hp 60 checking and then supply and installation ( including supply of component ) for split / cassette / vrv ac as applicable 3 way switch swing motor / blower motor exhaust fan & its motor air filter copper tubing indoor pcb split ac indoor pcb cassette ac indoor pcb vrv ac outdoor pcb split ac outdoor pcb cassette ac outdoor pcb vrv ac temperature sensor / card cu flexible cable ( 3cx6sqmm ) insulation of ac duct supply and replacing of drain pipe of pvc for ac charging of refrigerant for ac control card split ac control card cassette ac control card vrv ac 61 below items to be applicable for all dg sizes supply and installation of banjo hose for dg for all dg sizes supply and installation of kwh meters in dg for all dg sizes supply and installation of thermostat for dg for all dg sizes supply and installation of water temperature switch for dg for all dg sizes supply and installation of spin on lube oil filter for dg for all dg sizes supply and installation of spin on air filter for dg for all dg sizes supply and installation of spin on diesel filter for dg for all dg sizes supply and installation of battery charger 12 v for dg for all dg sizes supply and installation of battery charger 24 v for dg for all dg sizes supply of engine oil of cummins / kirloskar make for all dg sizes supply and installation of magnetic pick up coil for dg for all dg sizes supply of coolant for coolant cooled engines of cummins / kirloskar / mahindra make for all dg sizes supply and installation of dg set exhaust pipe insulation ( rope ) coating for all dg sizes supply & installation of floating mechanical fuel gauge on fuel tank of kirloskar / cummins / mahindra make repairing of display panel / amf panel and programming of kirloskar / cummins / mahindra make repairing & supply of any component for amf panel and programming of kirloskar / cummins / mahindra make supply & installation of acoustic enclosure door lock 62 repairing of automatic voltage regulator of crompton greaves avr of cummins / kirloskar / mahindra make d.g set. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. 63 supply & replacement of fuel filter pre type of kirloskar / cummins / mahindra make 64 supply & replacement of fuel filter mic type of kirloskar / cummins / mahindra make 65 supply & replacement of lube oil filter element of kirloskar / cummins / mahindra make 66 supply & replacement of air filter of kirloskar / cummins / mahindra make 67 supply & replacement of air cleaner of kirloskar / cummins / mahindra make 68 supply & replacement of v belt for blower of kirloskar / cummins / mahindra make. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. 69 supply of & replacement v belt for dynamo of kirloskar / cummins / mahindra make. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. 70 replacement of bearing set of kirloskar / cummins / mahindra make. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. 71 replacement of oil seal for crank of kirloskar / cummins / mahindra make. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. 72 supply and installation of automatic float boost charger of nhp make provided by m / s kirloskar / cummins / mahindra of 12v / 24v 6 / 12 amp rating. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. 73 supply, removal of old battery & installation of new 12v / 24v lead acid battery of approved make for invertor / dg set. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles, used during execution of this activity. contractor shall buyback the old battery. 65ah 75ah 100ah 120ah 150 ah 74 supply and replacement of applicable current transformer supply and replacement of applicable current transformer ct rasin cast : ct ratio 150 / 1a, cl 5p20, va 7.5 supply and replacement of applicable current transformer ct rasin cast : ct ratio 100 / 1a, cl 5p20, va 7.5 supply and replacement of applicable current transformer ct rasin cast : ct ratio 100 / 1a, cl 1, va 7.5 supply and replacement of applicable current transformer ct rasin cast : ct ratio 75 / 1a, cl 5p20, va 15 supply and replacement of applicable current transformer ct rasin cast : ct ratio 75 / 1a, cl 1, va 10 supply and replacement of applicable current transformer ct rasin cast : ct ratio 75 / 1a, cl 5p20, va 7.5 supply and replacement of applicable current transformer ct rasin cast : ct ratio 200 / 1a, cl 1, va 10 75 supply and replacement of potential transformer pt ratio 415 / 110v, 50va or as applicable 76 supply and installtion of transformer optional item transformer oil transformer oil filtration and testing of oil as per is:1866 replacement of silica gel 77 supply, replacement and installation of solar light spares solar module ( vikram solar, waree solar, goldi green technologies pvt ltd, tata power solar systems pvt.ltd, solar systems pvt.ltd, moser bear solar limited, xl energy limited, solar semiconductor, emmvee photovoltaic pvt ltd , navitas green solutions pvt ltd, satvik, panchwakr solar, surana solar ) photovoltaic battery 12v 150ah ( exide, okaya, luminous, relicell, artheon, su kam, base, southern, hbl, gem ) charge controller ( photonic, superier, gelco ) 78 led street light fixtures solar lighting poles ( philips, crompton, wipro, havells, oreva, charlson, syska, moser bear, surya, bajaj ) led luminaire fixture 18, 36, 40 watts approved make pcb for led luminaire fixture 18, 36, 40 watts supply, laying & termination of 2c x 4 sq. mm armoured power cable 79 supply & installation ( including removal of existing one ) of ni cd battery ( vrpp / vrla / vrnm / ultra low maintenance batt. ) 1.2 v for ups / dc charger / inverter system. ( contractor shall buyback the old battery. ) 120ah 150ah 107ah 540ah 450ah 651ah 80 supply & installation of 11 kv line type lightning arrestor on dp structure of reputed make like oblum, national electric etc. 81 liasioning with cei for annual periodical inspection of ht facility ( 11 kv ) or lt facility ( 420 v ) including distribution transformer, vcb, dg set & obtaining statutory clearance certificate under electricity act ( measures relating to safety & electric supply ) as amended from time to time. applicable statutory fees only shall be paid by owner. 82 supply and installation of cable jointing kit for following cable ( 3m / raychem make ) including ir test and re commissioning of cable. the work includes excavation upto the cable, making required trenches for execution of job and backfilling the area. no separate charges shall be paid for manpower, excavation, backfilling, consumables, equipments, tools & tackles used during execution of this activity. upto 3.5 c x 50 sq. mm. al. armoured cable upto 4 c x 50 sq. mm. al. armoured cable 3.5 c x 95 sq. mm. al. armoured cable ( ht ) 3.5 c x 95 sq. mm. al. armoured cable ( lt ) 3.5 c x 100 300 sq. mm. al. armoured cable ( ht ) 83 supply, laying & termination of xlpe insulated, frls outer sheathed, pvc inner sheathed cable voltage grade 650 / 1100 volts of following sizes above ground on cable trays, supported on steel structures, in ready made trenches. the rates shall include the supply and fixing of aluminium number tags, g.i. saddles / clamps, saddle bars, lugs, ferrules, double compression type ss glands, etc, including transportation with all labor and materials as per the specifications, drawings and directions of engineer in charge . the insulation resistance of cable has to be checked & report to be submitted before commissioning. no separate charges shall be paid for manpower, consumables, tools & tackles used during execution of this activity. upto 4 c x 6 sq. mm. cu. armoured cable 4 c x 10 sq. mm. cu. armoured cable 4 c x 25 sq. mm. cu. armoured cable 84 supply, laying & termination of xlpe insulated, frls outer sheathed, pvc inner sheathed cable voltage grade 650 / 1100 volts of following sizes under ground and / or pull through pipes including excavation and backfilling etc. work includes excavation of trench of average 0.5 meter wide & up to 1.2 meter depth with all appropriate tools & tacles ( manual work inside terminals ) . layer of sand shall be of 100 mm thick & brick layer shall be laid on cable for protection and back filling of trench after completion of work. work includes carting of surplus earth / debris and handling / unrolling of cable, supply of aluminium tags, lugs, ferrules, double compression type ss glands, etc, including transportation with all labour and materials as per the specifications, drawings and directions of engineer in charge . the insulation resistance of cable has to be checked & reported before commissioning.no separate charges shall be paid for excavation, backfilling, manpower, consumables, equipments, tools & tackles used during execution of this activity upto 4 c x 4 sq. mm. cu. armoured cable 4 c x 6 sq. mm. cu. armoured cable upto 4 c x 10 sq. mm. cu. armoured cable 85 supply and installation of gi 4.5 meter lighting pole for process area 86 supply and installation of 100 watt flp flood light along with jb ( mcb etc ) and armond cable 87 supply and installation of vcb spare surge arrestor ( make: raychem rfg, rating: 10 kv, 10 ka, class 1, model: da1 10a ind ) supply and replacement of applicable current transformer ( ct ) 11 kv , ct 2 core wound : cr1 50 / 5a, burden 7.5va, cl: 1 isf:5 cr2 50 / 5a, burden 7.5va, cl: 5p10 bil 12kv / 28kv / 75kv. freq: 50hz supply and replacement of applicable gun type pt with 3.15a bussman fuse pri. volt : 11kv / 3, freq :50hz cr1 : sec volt : 110 / 3, burden : 100 va , cl :1 / 3p cr2 : sec volt : 110 / 3, burden : 25 va , cl :3p bil 12kv / 28kv / 75kv. freq: 50hz schneider make protection relay , p127 dir / non dir 3 ph o / c & e / f model no : p127 aa0z112fed earth current : i / p – 0.1 – 40a voltage i / p 57 130 v digital i / p voltage : 24 250 vdc / ac 88 supply & installation of spd ( surge protection device ) 10 ka / 25ka ( for medb ) 89 supply and installation of ht termination kit ( indoor / outdoor ) for following cable ( 3m / raychem make ) including ir test and re commissioning of cable ( 3c x up to 300 sq. mm. al. armoured cable ) 90 supply & installation of copper earthing cable 10 / 16 / 25 sq mm in consultation with eic. the job includes the excavation, removal of existing copper strip, laying of new cable, back filling & restoration. no separate charges shall be paid for manpower, tools & tackles, equipments, instruments used during this activity. 91 supply, installation testing & commissioning of copper earthing: the job includes: a ) excavation of a pit of size ( 900 mm x 900mm x 3500mm deep ) b ) placement of copper earth plate ( 600mm x600mm x3 6mm ) and embedding the gi pipe of 20mm, 3mtr. length in the earth c ) back filling the pit with alternate layers of approx. 100kg charcoal and 50 kg salt to cover the earth plate the pit shall further be refilled with earth upto ground level and compacted. copper strip ( size 25mm x 3 6mm ) 2 nos. shall be provided from plate electrode to ground level to facilitate jointing with earth wire. it shall be provided with test link for testing of the particular earth pit. the funnel shall be installed above the ground for facilitating pouring of water. the funnel of earthing pits shall be covered by brick masonry chamber ( size 900mm x 900 mm x 600mm ) with cement plaster on inside and outside. the chamber shall be provided with a hinged ms cover and frame fixed on chamber alognwith sticker tagging installed on the backside of ms plate ( 400x100mm ) . the resistance of the pit must be achieved below 1 ohm 92 supply and filling of chemical solution for earthing and restoring the earth pit to its standard values 93 supply, installation, testing & commissioning of gi pipe earthing. a pit ( size : 3500 mm deep ) shall be excavated by auguring or otherwise, 65 dia gi pipe 3.5 mtr. length shall be put. the gi pipe shall be cut tapered at the bottom and provided with holes of 12 mm dia. drilled at 75 mm interval upto 2.5 mtr. length from bottom. the pit shall be back filled with alternate layers of appx 100 kg of charcoal and 50 kg of salt. the pit shall further be refilled with earth upto ground level and compacted. gi strip size 50x12mm shall be welded to this gi pipe at ground level to facilitate jointing with earth wire. it shall be provided with test link for testing of the particular earth pit. the funnel shall be installed above the ground for facilitating pouring of water. the funnel of earthing pits shall be covered by brick masonry chamber ( size 900mm x 900mm x 600mm ) with cement plaster on inside and outside. the chamber shall be provided with a hinged ms cover and frame fixed on chamber along with tagging on ms plate ( 400x100mm ) . the resistance of the pit must be achieved below 1 ohm. 94 supply, laying & installation of copper earthing strip – 25 x 3 mm ( above ground / under ground ) with over lapping of minimum 75 mm at joints and two consecutive strip be bolted together with copper bolt, job includes cutting the strip suitable to site, edge preparation , excavation of required length / width / depth, strip laying and back filling after completion, site welding and bending and termination as per eic, supply of copper connection bolts etc. 95 supply, laying & installation of gi earthing strip – 50 x 6 mm, ( above ground / under ground ) with over lapping of minimum 75 mm at joints and two consecutive strips to be welded together and applying bitumen on the joint. job includes cutting the strip suitable to site, edge preparation , excavation of required length / width / depth, strip laying and back filling after completion, site welding and bending and termination as per eic, supply of ss connection bolts etc. 96 supply, laying & installation of gi earthing strip – 25 x 6 mm, ( above ground / under ground ) with over lapping of minimum 75 mm at joints and two consecutive strips to be welded together and applying bitumen on the joint. job includes cutting the strip suitable to site, edge preparation , excavation of required length / width / depth, strip laying and back filling after completion, site welding and bending and termination as per eic, supply of ss connection bolts etc. 97 supply and installation of three way flameproof junction box with appropriate flame proof double compression cable gland of approved make 98 dismantling, powder coating ( alkali resistant epoxy powder coated , shade:ral 7032 ) & reassembling of ni cd battery rack. work includes surface cleaning of batteries with dm water & potential measurement of each cell voltage after reassembling. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. 99 supply & installation of stabilizer upto 4 kva 230 volt of v guard, gelco, luminous, voltek make. it should be cu wound with overload tripping feature, voltmeter ( digital ) and mcb. 100 supply & installation of stabilizer from 5 kva to 8 kva 420 volt ( 3 phase ) of v guard, gelco, luminous, voltek make. it should be cu wound with overload tripping feature, voltmeter ( digital ) and mcb. 101 relocation of lighting pole / solar pole / opgd / pgd within the terminal which includes removal with or without rcc foundation & re installation with proper foundation, concrete support etc. complete in all respect. this also include levelling of old foundation location & backfilling if required with all tools, tackles, labour, machinary, hydra etc. removal of fixture, jb , earthing connections, cable connection from pole at old location & reconnection & testing of all the system at new location is included in the scope. 102 supply & replacement of rectifier module for industrial inverter up to 2.5 kva make: vertive / emerson 103 supply laying & termination of 4 c x 10 sq.mm cu flexible cable 104 supply and installation of ss 316, double compression type cable glands for armoured twin and multicore power cables of voltage grade 650 / 1100 v and instrument cables alongwith pvc shrouds. the glands shall be flameproof to gas group iia, iib and / or weatherproof to ip 65, for cables having overall diameters as given below. applicable certificate shall be provided by the contractor. 1 / 2 npt / et as specified by eic 3 / 4 npt / et as specified by eic 1 npt / et as specified by eic 105 maintenance of junction box including cleaning, supply & replacement of rubber seal, nut bolt , entry plug, gland & washer. no separate charges shall be paid for manpower, rubber seal, nut bolt, entry plug, gland, washer, consumables, tools & tackles used during execution of this activity. 106 supply & instalaltion of gi cable trays with cover on ms steel support. all accessories shall be in the scope of contractor like ms angle support , channel, fastners, clamp, cable tie etc. as per below mentiond size perforated cable tray with cover 150 mm perforated cable tray with cover 100 mm 107 supply & instalation of heavy duty exhaust fan, made of cast aluminium alloy lm6, exproof to gas group iia & iib. suitable for continuos running. it should be epoxy powder coated for resistance to corrosion and acid alkali fumes. it should be supplied with self opening louvers for total protection against birds and direct rain. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. size : 300 mm, single phase size : 450mm, single phase 108 supply and installation of ceiling fan ( gigl approved vendor make ) , white / ivory colour, 230v, 1 phase, 1200 mm sweep. it shall have robust two piece motor construction, all aluminum alloy construction with double ball bearing and powder coated finish to protect metal from corrosion.the fan shall be energy efficient having 5 star rating. removing of existing fan from the location. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. 109 painting of lighting pole / solar pole / opd pole / stack including surface preperation, supply of paint and application of 2 coat of high build chlorinated rubber / zinc phosphate primer and two coats of finished paint of epoxy paint of silver colour approved make to give an even shade after proper removal of existing paint by power brushing or suitable method and clearing of surface free from foreign materials. no separate charges shall be paid for manpower, consumables, equipments, tools & tackles used during execution of this activity. upto 5 meter height pole upto 6 meter height pole 6.1 meter to 9 meter height pole 9.1 meter to 11 meter height pole instrumentation 110 removal, refilling & re installation of co2 gas cylinders used for flooding system of water capacity: 68 liter including to & fro transportation. ( co2 refilling shall be carried out thru peso approved vendor only ) . no separate charges shall be paid for manpower, tools & tackles, lifting equipments used during this activity. 111 removal, refilling & re installation of clean agent ( fm200 / fk 1 2 3 ) gas cylinders used for flooding system of water capacity: 80 liter including to & fro transportation. ( clean agent refilling shall be carried out thru peso approved vendor only ) . no separate charges shall be paid for manpower, tools & tackles, lifting equipments used during this activity. 112 ofc 24 / 48 fiber jointing at pit location by preparation of fiber, removal of the sheath, cleaning of the fiber, fixing the fiber to the ftc with proper clamping / ties. numbering of the fiber using ferrules, splicing the fiber to the pigtail, proper routing of the fiber in the cassette. proper closure of the cassette, connecting the pigtail to the adapter, and marking the same, for 1 24 / 48 fibers joints. job include fault finding & identification using otdr. end to end testing of fibres after jointing and submission of report. incase of unacceptable db loss at repair joint same needs to be rectified with out any cost implication to owner. final end to end otdr test shall be carried out for all 24 / 48 fibres & submit the report without any cost implication to owner. no separate charges shall be paid for manpower, instruments, transportation used during this activity. visit for fault finding & final testing shall be considered as one visit only. complete link testing end to end with power source, laser source, otdr meter working with 1310 nm and 1550 nm from both end including pigtails, patch cord for testing. submission of all 24 core otdr traces between two terminals or across the joints. pit excavation & back filling included & no extra charge shall be paid. jointing enclosure for 24 / 48 core fiber cable shall be supplied by contractor. 113 removal and re installation of ultrasonic meter of size mentioned below. no separate charges shall be paid for manpower, consumables, lifting equipments, valve operations, tools & tackles used during execution of this activity. gasket shall be supplied by owner at designated store. 4 8 10 114 removal and re installation of turbine flow meter of size mentioned below. no separate charges shall be paid for manpower, consumables, lifting equipments, tools & tackles used during execution of this activity. gasket shall be supplied by owner at designated store. 3 4 115 removal and re installation of rotary positive displacement ( rpd ) meter of size mentioned below. no separate charges shall be paid for manpower, consumables, lifting equipments, tools & tackles used during execution of this activity. gasket shall be supplied by owner at designated store. 2 116 removal and re installation of flow control valve of size mentioned below. no separate charges shall be paid for manpower, consumables, lifting equipments, tools & tackles used during execution of this activity. gasket shall be supplied by owner at designated store. 4 8 10 117 supply, laying & termination of pvc insulated, frls outer sheathed, pvc inner sheathed instrumentation cable voltage grade 650 / 1100 volts of following sizes under ground and / or pull through pipes including excavation and backfilling etc. work includes excavation of trench of average 0.5 meter wide & up to 1.2 meter depth with all appropriate tools & tackles ( manual work inside terminals ) . layer of sand shall be of 100 mm thick & brick layer shall be laid on cable for protection and back filling of trench after completion of work. work includes carting of surplus earth / debris and handling / unrolling of cable, supply of aluminium tags, lugs, ferrules, double compression type ss glands, etc, including transportation with all labour and materials as per the specifications, drawings and directions of engineer in charge . the insulation resistance of cable has to be checked & reported before commissioning. no separate charges shall be paid for excavation, backfilling, manpower, consumables, equipments, tools & tackles used during execution of this activity instrument cable upto 1p x 1.5sqmm armoured cable instrument cable upto 2p x 1.5sqmm armoured cable instrument cable upto 6p x 1.5sqmm armoured cable 118 supply, fabrication and installation of aluminium canopy for field instruments, open path gas detectors, flow computers. dimensions of the canopy as per field instrument actual at site and instruction as per eic 119 supply & installation of gigl approved makes cooling / ventilation fan along with safety grill and dust preventor in control panel. size : 4” axial fan 220v ball baring with finger guard size : 6” axial fan 220v ball baring with finger guard 120 supply & replacement of door hinges / lock in instrument local control panel / rtu panel / metering panel etc. the job shall be caarried out by qualified instrument technician / electrician. 121 supply and installation of pre cast foundation with metallic cable route marker ( for instrumentation and electrical cables ) . excavation and backfilling are inclusive noe extra charges shall be paid general 122 arrangement and supply of water in tanker / truck / lorry 5000 litres 123 collection of hazardous wastes including used engine oil, gear oil, hydraulic oil , transformer oil , spent oil, filter elements, grease contaminated cotton waste etc. from gigl stations and disposal off the same to an approved pollution control board vendor by complying hazardous waste ( management and handling ) rules, 1989. 124 hiring of following equipments for doing any emergency work with all required valid test certificates. the period of hiring will start after the equipment reaches at site and ends when equipment leaves the site. break down period of equipment will not be paid. normal working time per day will be 8 hrs. rate for idle time shall be 50%. night is not included in idle time except if works will continue in night. hiring rates is inclusive of diesel, operators, maintenance cost, loading / unloading of equipments by hydra / manual at site. dewatering pump of capacity 20kl with required capacity d.g.set hydra of lifting capacity 10mt to 15 mt along with required wire ropes & d shackle 15kva dg set 30kva to 45 kva dg set jcb 125 schedule of rates for extra works for manpower supply along with required tools tackles, consumables and equipment qualified welder fitter / grinder electrician / wireman instrument technician / tubing fitter rigger helper / unskilled labour plumber mason carpenter 126 supply & installation of dm water as per the requirement at designated store. transportation, manpower and containers are in contractors scope. 127 greasing, oiling, repairing of m.s.rolling shutters ( manual operating ) 128 installation, and pre commissioning of fml skid with all required manpower, consumable, equipments, tools & tackles etc. unloading of entire fml skid and installation at designated foundation with proper alignment and grouting of skid hook up with existing station piping with necessary gaskets providing required structural support pneumatic testing at 95 barg  ( n2 supply, tested high pressure hose, ss fittings, calibrated pressure gauge etc inclusive ) calibration of psv / creep relief valve calibration of filed instruments ( within fml skid – press, temp, dp gauges / transmitters ) supply & installation of opgd pole with proper foundation ( pole height max. 6 mtr of 6” dia ) opgd instruments shall be supplied by owner ) , installation of opgd on the pole shall be in contractor scope installation of pgd on structure support with proper cable termination installation of instrument panel in control room glanding & termination of cable laid for panel / instruments / jb / fixtures supply of armoured communication cable rs485 laying & termination of communication rs485 ( above ground / under ground as per requirement shall be laid in proper cable trench req. excavation / backfilling / dressing between control room to skid shall be in contractor scope ) supply of 3 core x 2.5 sq. mm armoured cu cable for meter & heater laying & termination of individual run of 3 core x 2.5 sq. mm armoured cu  cable  for meter & heater ( above ground / under ground as per requirement shall be laid in proper cable trench req. excavation / backfilling / dressing between control room to skid shall be in contractor’s scope ) supply of 10 sq. mm cu earthing cable from instruments to cu earth pit laying & termination of 10 sq. mm cu earthing cable from instruments to cu earth pit supply, installation, testing & commissioning of copper earthing pit ( earth pit details as per relevant sor ) providing gi earthing ( 50 x 6 mm gi strip ) to skid from existing gi earth pit providing and installation of copper jumper of req. size ( 10 sq . mm ) supply of instrument cable ( refer relevant sor for cable details ) for the following instrument cable upto 1p x 1.5sqmm armoured cable instrument cable upto 2p x 1.5sqmm armoured cable laying & termination of individual run of instrument cable ( above ground / under ground as per requirement shall be laid in proper cable trench req. excavation / backfilling / dressing between control room to skid shall be in contractor’s scope ) with panel / instrument / fixtures 129 stencilling & painting of numbers / letters / logos / arrow etc including supply of fluorescent / highlighted paint / acrylic emulsion / oil paint of approved brand as per the gigl / gspl vendor list and quality wherever required as per directed by gigl e i c: area of the stencilling & painting shall be calculated on the basis of length & width of words. 130 supply and application of good quality sun film of isi mark, black colour on plain float glass. 131 providing and fixing double action hydraulic floor spring of approved brand ( dorma or equivalent ) and manufacture ( conforming to is: 6315 ) for aluminium doors including cost of cutting floors as required, embedding in floors and cover plates etc. complete as per the direction of eic. 132 providing and fixing mild steel bright polished nickel plated pull bolt lock conforming to is: 7534 with necessary nuts and screws etc. complete 85 mm x 42 mm. 133 providing and fixing ss handles anodized 125 mm ( anodic coating not less than grade ac 10 as per is: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. 134 providing and fixing in position approved make dorma or approved equivalent ) heavy duty overhead hydraulic door closer with adjustable spanners, screws etc. conforming to is: 3564.including all necessary fixtures fittings finishing etc. all complete. 135 repairing of floor spring / door closer of the rooms which includes replacement of internal parts etc. 136 replacement or repairing of damaged parts of aluminium / glass windows / doors for smooth opening and closing in control room buildings, guard room including checking of alignment, bearings, lock, handle, sealing, channel cleaning, screws, tools and tackles and labour charges etc. all inclusive. 137 supply and installation of bakelite sheet sheet upto 10mm thick in doors, windows as per applicable colour as per direction of eic. 138 providing and fixing flush tank complete with connection to sanitary w / c line. rate shall include all internal plumbing cost inclusive of all necessary items to complete the job as directed by engineer – in – charge 139 providing & fixing in position 15 mm c.p. brass bib cocks of best quality. bibcock valve 140 providing & fixing jet spray / hand faucet – with all fittings & fixtures. 141 removal of damaged false ceiling from the position and disposal of the same within a lead of 500 meters and fixing new false ceiling of mineral fibre false ceiling in place / in position of old ceiling : by providing and fixing mineral fibre false ceiling of armstong or equivalent with anodised ( 25 micron ) alum silhouette grid framework from roof slab at desired height in desired pattern including finishing, making the frame work perfectly levelled and alligned etc. all complete. 142 removal of damaged false ceiling tiles from the position and fixing new false ceiling of mineral fibre false ceiling of 600 x 600 mm of armstong or equivalent ( without cost of suspending grid frame work ) 143 removal of damaged false ceiling from the position and disposal of the same within a lead of 500 meters and fixing new false ceiling of gypsum in place / in position of old ceiling : by providing , supplying and fixing india gypsum board of 12.5mm thick ( plain ) using all the farming and fixing members / accesories of gypsteel ultra supplied by the manufacturers igl ( saint gobain gyproc india ) and installation is to be done as per manufacturers specification excluding painting rate shall be inclusive for providing cut outs for all ceiling light fixtures etc as per drawing and approved by architect / pmc. ( the contractor has to give companys ( igl ) certification for performance of the product and installation 144 water proofing / roof slab repairing of cracks in old terraced roofs. existing roof treatment will be dismantled and app modified water proofing will be provided with protective layer of 35 mm thk. p.c.c. ( 1:2:4 ) in panels of maximum size 1200mm x 1200mm chequered finish with 24 swg chicken wiremesh interposed in between finished smooth with joints between panels sealed with suitable polyurethane sealant; providing fillets of 75 mm radius with p.c.c. ( 1:2:4 ) at junctions of horizontal and vertical surfaces finished smooth; providing 450mm x 450mm khuras ( rain water collecting pits ) in 1:2:4 cement concrete at all outlets, levelled down by min. 25mm, finishing, curing etc. all complete as per approved manufacturers standard specifications and recommendations. also, top surface shall be covered with china mosaic flooring 145 water proofing / roof slab repairing of cracks in old terraced roofs. existing roof treatment will be dismantled and new brick bat koba water proofing will be provided with laying cement concrete using broken / brick bats 25mm to 100mm size with 50% of cement mortar 1:5 ( 1cement: 5 coarse sand ) admixed with proprietary water proofing compound confirming to is: 2645 over 20mm thick layer of cement mortar of mix 1:5 ( 1 cement: 5coarse sand ) admixed with proprietary water proofing compound confirming to is: 2645 to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. finishing the surface with broken china ( glazed ) laid joint less with cement mortar of mix 1:4 ( 1cement: 4 coarse sand ) admixed with proprietary water proofing compound confirming to is: 2645 and finally finishing the surface with trowel. also, top surface shall be covered with china mosaic flooring 146 road transportation of gigl issued equipments, materials, pipes, skids etc. from the point of loading to destination. this job including loading at issue location, un loading & stacking at designated location with tools & tackles, equipments, hydra / crane, manpower, supervision as per the directions of eic. this include interstate transportation of material and all applicable taxes ( toll etc. ) charges for hydra / crane along with operator and crew required for loading and unloading shall be inclusive vehicle such as utility / tata 407 / tata 409 / truck with load carrying capacity as given below upto 2.5 mt 2.6 mt to 4.5 mt 4.5 mt to 6 mt 6.1 mt to 9 mt 147 trailer with prime mover flat bed; trailer length: 40 ft with load carrying capacity as given below: for transportation of line pipes of double random length upto 10 metric ton in trailer for transportation of line pipes of double random length 10.1 18 metric ton in trailer 148 dismantling & removing the existing installed equipment such as dg set, metering skid, filter, filteration skid, prs skid, pig barrel, pig trolly, jib crane, piping, electrical / instrumentation panel, valves, structural steel etc. carefully including handling, loosing the nuts, bolt cutting etc ( if required ) and stacking the equipments / material as directed by eic. manpower, machinery required shall be in contractors scope. item weight upto 50 kg item weight upto 51 150 kg item weight upto 151 250 kg item weight upto 251 500 kg item weight upto 501 1000 kg item weight upto 1 ton 2 tonnes item weight upto 2 tonnes 3 tonnes 149 installation of equipment such as dg set, metering skid, filter, filteration skid, prs skid, pig barrel, pig trolly, jib crane, piping, electrical / instrumentation panel, valves, structural steel etc. carefully including handling, erection and proper installtion of the equipments / material as directed by eic. manpower, machinery required, shall be in contractors scope. item weight upto 50 kg item weight upto 51 150 kg item weight upto 151 250 kg item weight upto 251 500 kg item weight upto 501 1000 kg item weight upto 1 ton 2 tonnes item weight upto 2 tonnes 3 tonnes 150 providing fixing, testing and commissioning in position uv stabilised pvc swr pipe of supreme, finolex, kisan or prince make as per is:13592 class b, including excavation incase of under ground and jointing with tee shaped rubber seal ring confirming to is : 5383 & with pvc adhesive solvent, including fitting like elbows, collors, tees, unions, couplers, reducers, enlargers, bends and all other required fittings for water facility inside terminal 15mm dia 20mm dia 25 mm dia 151 supply, installation, testing and commissioning of gunmetal, male or female threaded isolation valve ( handle valve ) , confirming to is 778, pn 1.0, with necessary specials, unions, nipple etc., to complete the job. ( for external / internal work ) 20mm dia 25 mm dia 50 mm dia 152 cleaning of septic tank / sever / mud pit with its associated system including removal of sock / mud, dewatering, removal of chocking if any, debris and disposal of the same to the distance of 10 km, cleaning with fresh water including tools / tackels / transportation / material / labour etc., 153 construction of slab for soak pit including tools / tackels / transportation / material / labour etc., 154 construction of soak pit including tools / tackels / transportation / material / labour etc., hse refilling of co2 155 refilling of co2 2 kg cylinders 156 refilling of co2 4.5 kg cylinders 157 refilling of co2 gas cartridge 180 gms 158 refilling of co2 gas cartridge 1 kg 159 refilling of co2 gas cartridge 2 kg other items 160 operating cap dcp 161 operating cap with safety valve dcp 162 pvc discharge hose 9 kg dcp 163 pvc discharge hose 75 kg dcp 164 shutoff nozzle 75 kg dcp 165 safety clip with chain dcp 166 rubber cap washer dcp 167 rubber bush, screw & washer 9 kg dcp 168 inner container 10 kg dcp 169 wall brackate 10kg dcp 170 rubber guard for nozzle dcp 171 pressure gauge for abc fire extinguishers 172 trolley wheel set 75 kg dcp 173 sticker ( dcp 75 kg, co2 2 / 4.5 kg, dcp 9 kg, abc 9 kg ) 174 connecting hose 75 kg dcp 175 spring loaded safety valve dcp 176 dcp powder 177 brass operating cap assembly dcp 9 kg 178 abs plastic siphon tube upto 9 kg dcp 179 ss mad safety lock pin dcp 9 kg 180 abc powder with n2 pressurization in each cylinder 181 discharge hose with horn 1 mtr for upto 4.5 kg co2 182 discharge horn 4.5 kg 183 locking pin 184 locking holder 185 neck handle wit rubber clip co2 186 wall brackate co2 187 valve co2 188 rubber handle ( hose between horn ) co2 189 ms nipple ( hose between horn ) co2 190 supply of acrylic sheet for tagging 191 painting of co2 2 kg cylinders 192 painting of co2 4.5 kg cylinders 193 hydro test & refilling of co2 2 kg fire extinguisher 194 hydro test & refilling of co2 4.5 kg fire extinguisher 195 refilling of scba set cylinder pest control 196 honeycomb treatment 197 diluting and injecting chemical emulsion for post constructional anti termite treatment ( excluding the cost of chemical emulsion ) :along external wall where the apron is not provided using chemical emulsion at 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos / lindane e.c. 20% with 1% concentration...

Mahatma Gandhi National Rural Employment Guarantee Scheme - Gujarat

38133335 material purchase & supply for development oriented works mgnrega taluka panchayat office una dist gir somnath ( 2nd attempt ) form work ( ord. timber ) ( 9 1 b1 ) , form work ( ord. timber ) ( 9 1 g1 ) , form work ( ord. timber ) ( 9 1 h1 ) , form work : vertical surface as wall or partition ( 9.1 c ) , steel hysd, battens 75 mm x 100 mm, binding wires, c.i. cover with frame 300mm x 300mm, c.i. cover with frame 455mm x 610mm, c.i. cover with frame 500mm x 700mm, c.i. cover with frame 600mm x 850mm, cement ( 53 grade ) , coarse sand, common burnt clay bricks modular size 20x10x10 cm, corrugated a.c. sheet 6 mm thick, crushed stone aggregate for hard quality 6 to 10mm size, crushed stone aggregate for hard quality 10 to 20mm size, crushed stone aggregate for hard quality 20mm size, crushed stone aggregate for hard quality 40mm size, crushed stone aggregate for hard quality 40mm to 63mm size, common burnt clay bricks modular size 20x10x10 cm, distemper primer, dry distemper, enamel paint, enamel primer, fine sand, flat back wash basin colour glazed 450 x 300 size, g.i sheet 0.8 mm thick corrugated class 3, g.i sheet 0.8 mm thick semi circular class 3, g.i. barbed wire, g.i. j or l hooks, galvanised mild steel tube medium grade 15mm dia, galvanised mild steel tube medium grade 20mm dia, galvanised mild steel tube medium grade 25mm dia, galvanised mild steel tube medium grade 32mm dia, gun metal screw down bib tap 15 mm dia, gun metal screw down bib tap 20 mm dia, gun metal wheel valve 15mm dia, gun metal wheel valve 20mm dia, gun metal wheel valve 25mm dia., gun metal wheel valve 32mm dia, gun metal wheel valve 40mm dia, guard stone, hand broken stone aggregate 25mm size to 90mm size, hand broken stone aggregate 40mm size to 63mm size., hard marrum, oil bound distemper, p.v.c bib tap 15mm. dia, p.v.c bib tap 20mm. dia, plastic emulsion paint, polished kota stone slab green. 30 mm thick, polished kota stone slab green. 25 mm thick, polished kota stone slab green. 40 mm thick, pre cast cement concrete tiles, precast rcc jali 25 mm thick, precast rcc jali 40 mm thick, precast rcc jali 50 mm thick, precast rcc jali 75 mm thick, quarry spall., precast rcc jali 100 mm thick, precast rcc jali 25 mm thick, precast rcc jali 40 mm thick, precast rcc jali 50 mm thick, precast rcc jali 75 mm thick, r.c.c heavy duty non pressure pipe i.s. class np=3 300mm dia., r.c.c heavy duty non pressure pipe i.s. class np=3 450mm dia., r.c.c heavy duty non pressure pipe i.s. class np=3 900mm dia., r.c.c heavy duty non pressure pipe i.s. class np=3 600mm dia., r.c.c heavy duty non pressure pipe i.s. class np=3 800mm dia., r.c.c heavy duty non pressure pipe i.s. class np=3 1100mm dia., r.c.c heavy duty non pressure pipe i.s. class np=3 1200mm dia., s.w. gulley trap 150mm x 100 mm size., s.w. guly trap 100 x 100 mm size, stone dust, synthetic enamel paint, terrazo tiles chequered dark shade 22mm thick, terrazo tiles chequered light shade 22mm thick, terrazo tiles chequered dark shade 28 mm thick, terrazo tiles chequered light shade 28 mm thick, terrazo tiles dark shade 20 mm thick, terrazo tiles light shade 20 mm thick, unscreened gravel, urinal flat back, urinal ladies squatting pan, urinal squatting type, urinal stall type full size, urinal stall type half size, varnish, vitryfied granite tiles 8 mm to 10 m thick 24 x 24 size dark shade, vitryfied granite tiles 8 mm to 10 m thick 36 x 36 size, water proofing cement paint, white bela stone, white cement, white paint, white vitriour china wash down w.c. ( european ) , white vitrious china sink 600mm x 450mm x 150mm, white vitrious ching w.c. sqatting pan ( india type ) , precast concrete blocks ( 1:3:6 ) ( 39 x 20 x 19 cms ) , white glazed tiles 15cm x 15cm x 6cm., hollow concrete blocks ( size 39 x 14 x 19 cms ) , m.s. angel, vitrified granite tiles 8 mm to 10 m thick 24" x 24 " size antiskid, vitrified granite tiles 8 mm to 10 m thick 24" x 24 " size light shade, weather proof acrylic exterior emulsion paint, s.s. aldrop 25 cm long of asis 304 grade, s.s. handle for door 15 cm size of asis 304 grade, s.s. railing pipe 16 mm x 16g asis 304 grade, s.s. railing pipe 50 mm x 16 g asis 304 grade, s.s. rialing sq pipe 32x32 mm x 16g asis 304 grade, s.s. stopper 60 cm long of asis 304, s.s. stopper 30 cm long of asis 304, s.s. stopper 20 cm long of asis 304, alluminium fixtures and fstenings., c.i.75 mm diameter rain water pipe, multy wall plycarbonate sheet 6 mm thick, plastic proofing compound., s.s. door / window hinges 4x1"x1", s.s. door / window hinges 4x3 / 4"x3 / 4", s.s. door / window hinges 3x3 / 4"x3 / 4", ss sink glosy asis 304 grade x 1mm thick with over all size 610x460 mm & bowl size 560x410x200, ss sink glosy asis 304 grade x 1mm thick with over all size 510x432mm & bowl size 445x368x190, ss sink glosy asis 304 grade x 1mm thick with over all size 485x410 mm & bowl size 410x365x165, gully trap 100mm x 100 mm size., laminated sheet 1.00 mm thick, pvc swr pipes is 13592 for drain 110 mmdia, pvc swr pipes is 13592 for drain 160 mmdia, pvc swr pipes is 13592 for drain 75 mmdia, pvc swr pipes is 13592 for drain 90 mmdia, pvc swr coupler 110 mm dia, pvc swr coupler 75 mm dia, pvc swr single t" 75 mm dia", pvc swr single t" 110 mm dia", anodised aluminum butt hinges 75 mm x63 mm x 3.2 mm, anodized alluminium section 63.50 x 38.10 x 1.2 mm @ wt. 0.643 kg / mt, glzed tiles piece wastege., paver block m200 grade 60mm thick, paver block m250 grade 60mm thick, polycarbonate multi wall roofing sheet, pre cast kerb block m250 grade, pvc water tank, wall primer of approved brand, 15mm dia. u.p.v.c. pipe ( ( sch 40 ) length = 12.0 mt, 25mm dia. u.p.v.c. pipe ( ( sch 40 ) length = 12.0 mt, 32mm dia. u.p.v.c. pipe ( ( sch 40 ) length = 12.0 mt, 50mm dia. u.p.v.c. pipe ( ( sch 40 ) length = 12.0 mt, aerated light weight concrete block 600 x 200 x 200 mm, solution 50 ml adhesive solvent, light weight calcium silicate tegular edged 595x595 modular acoustical celling tiles with 15 mm thick densified edges including 5% wastage, water tanker with pressure distributor / sprayer, angle iron 40 x 40 x 6, iron angle 75 x 75 x 6cm, nahni trap 100mm dia, cpvc pipe sdr 13.5 15 mm daimeter ( 1 / 2 ) ", cpvc pipe sdr 13.5 20 mm daimeter ( 3 / 4 ) ", cpvc pipe sdr 13.5 25 mm daimeter ( 1 ) ", cpvc pipe sdr 13.5 32 mm daimeter ( 1 1 / 4 ) ", cpvc pipe sdr 13.5 40 mm daimeter ( 1 1 / 2 ) ", cpvc pipe sdr 13.5 50 mm daimeter, cpvc pipe jointing solution 50 ml, rubble, tiles size 15 cm x 15 cm ( glazed ) , tmt bar fe 500 d ( 4, 8, 10, 12mm ) , vitrified granite tiles 8 mm to 10 m thick 24" x 24 ", supply tractor trolly with driver, rolling work 8 to 10 tone, mixture machine with operator, providing approved make ceiling fan with double ball bearing isi mark with condenser 230 volt a.c.50 hz 1200 mm sweep complete having 3 blades aluminium body and blade sets having ornamental design shanks [ make shall be approved by engineer in charge ] , providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or fan box., tube light with integral / non integral driver 20 22 watts, surge 4kv, ip 20, 4 feet ( cat iii ) , led lamps integral type, cool white with pc diffuser suitable for b22 lamp holder 5 to 8 watts, supplying led indoor fittings with leds of wattage 0.2 watt to 0.5 watt assembled on single mcpcb, with housing used as a heat sink shall be made of thick sheet steel conforming to is: 513 / crca powder coated and high u.v. & corrosion resistance with diffu, providing white stove enamelled box type fluorescent fitting complete with electronic ballast assembly, tube, holders erected with lead wires & connection with one tube 36 / 40 watt.120 cms and adapter if required cat ii, mains with 1.1 kv grade frls pvc insulated isi marked stranded copper conductor wire in following type of pipe to be erected concealed in / flushed on wall / ceiling, with 1.5 sq. mm copper conductor frls pvc insulated stranded wire of green colour for eart, ( a ) 2 wire 1.5 sq. mm, ( b ) 2 wire 2.5 sq. mm, ( c ) 3 wire 1.5 sq. mm, ( d ) 3 wire 2.5 sq. mm, providing isi mark medium class rigid pvc pipes of following size complete to be erected on / in wall or ceiling erected with necessary pvc fittings & junction boxes fixed with adhesive solution & clamps with following dia of pipes, in approved manner as d, providing & erecting approved make oval conduit with necessary fittings fixed with adhesive solution and suitable clamps erected on wall / ceiling of following size., ( 2 ) 25mm bakelite adopter for holder to be erected., providing following type of modular type accessories mounted with pvc / metallic / wooden box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. as desired by engineer in charge, ( 1 ) one no. sp 6 amp. cat.ii, ( 5 ) electronic hum free four or more steps eme fan regulator cat.ii supplying earthpit of minimum bore dia. 225mm size ash or approved make safe earthing electrode consisting pipe in pipe technology as per is 3043 1987 made of corrosion free g.i.pipes hav, [ a ] for electrical installation up to 440 length of pipe 1 mtr back filling compound 1 nos. of bag of 15 kgs., approved make elcbs / rccbs conforming to is: 12640 and having sensitivity of 30 ma and short circuit withstand capacity of 6 ka and suitable for operation on single phase 240 v. having characteristic of quick action & tripping with all advance feature &, providing sheet steel powder coated mcb distribution board flush / surface mounted fitted with busbar, neutral link, earth bar and din rail, confirming to is 13032 and bs 5486 1986 without mcb to house appropriate nos. of mcbs. ( the dbs should be used o, providing 240 v mcb double pole switch for motor & inductive load ( c curve ) having 10 ka breaking capacity & confirms to is : 8828 in existing box having following capacity a ) 32 amp. cat.ii, miniature circuit breaker single pole 1a to 32a suitable to operate on 240 v a.c. system and having breaking capacity 10 ka to be erected in existing box. confirming to is 8828 / 1996 with isi mark cat.ii, providing following shockproof tissino type accessories erected on 3 mm thick pc ( polycarbonate ) sheet in pvc / metal / wooden box. erected on wall / ceiling. ( 1 ) one no single pole 6 a switch / bell push, non decorative type 35 mm thick door shutter, s.s. door / window hinges 4x1"x1", s.s. door / window hinges 4x3 / 4"x3 / 4", door closers arrow type with spring 12 length as approved sample ( 30 cms ) , latch ( tadi ) as per sample approved sectional flats ( heavy ) brass 35 cms length, datta rubber for door size upto 1 ( 2.5cms ) , teak wood frames, glass 10 mm thick, steel plate & angle, rolling shutter rolling shutter of g.i. sheet any size grill, galvanised mild steel tube medium grade 65mm dia, murrum / binding material, p.v.c. flooring sheetp.v.c. 2.5mm thick, p.v.c. nahni trap, pvc swr gully trap 160 x 110, pvc swr piipe bend 45 degree 110 mm dia, pvc swr piipe bend 45 degree 75 mm dia, s.s. stopper 20 cm long of asis 304, wire gauge jali of 0.71 mm, work information board with colour writing in m.s. plate in standerd size, ceilling fan isi mark ( standard quality ) , fan box ( isi mark ) ( standard quality ) , lamp isi mark ( standard quality ) , moduler switch board ( including plugs and regulators ) 6 switch ( isi mark ) , moduler switch board ( including plugs and regulators ) 4 switch ( isi mark ) , holders for lamp, tubelight& fan ) isi mark ( standard quality ) , disc for lamp, tubelight and fan, tubelight isi mark ( standard quality ) , adaptars isi mark ( standard quality ) , robot isi mark ( standard quality ) , main switch board with fuse isi mark ( standard quality ) , wire 1mm ( isi mark ) , wire 2.5mm ( isi mark ) , earthing plate assembly ( isi mark ) , indian teakwood 35mm door ( frame & shutter ) including hing, stoppersetc complete, indian teakwood 35mm windows ( frame & shutter ) including hing, stoppersetc complete, pvc door with steel frame, flush door and window 25mm handle, hinges, knobs and lock with frame, steel door 0.75x2.10 mtr. with frame, pvc swr nani trap is 14735 for drain 75 mm dia with jali, pvc swr nani trap is 14735 for drain 100 mm dia with jali, black stone for cooking platfrom ( 1.50 sq.mt. ) , ceramic tiles, rough kotach stone slab. 25 mm thick, rough kotach stone slab. 40 mm thick, marble chips upto 4 mm size., marble slab 18 to 20 mm, marble slab stone 25mm thick double polished, marble slab polished granite stone 20 to 25mm thick black, marble slab polished granite stone 20 to 25mm thick colour, marble slab white adango 180x60 cms, marbo granite flooring tiles 8mm th., non decorative type 25 mm thick door shutter, non decorative type 35 mm thick door shutter, ( ii ) supplying of hard murrum 50mm to 150mm size., ( i ) supplying of murrum / binding materials, marble number plate, marble year plate 20cm x 15cm. x 2.5cm, providing corrugated g.i. sheet of class 3 roofing fixed with glavanished iron j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g.i. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and...

Western Railway - Gujarat

38131213 supply of single row deep groove ball bearing suitable for condensor motor, blower motor and wra motors of a.c. coaches as per skf cat.no.6205zz / fag cat. no.6205zzr. for poh of ac lhb coaches [ warranty period: 30 months after the date of delivery ] amm ( cd ) bct , wr maharashtra 245.00 numbers amm ( dl ) rtm , wr madhya pradesh 4.00 numbers => limited...

Western Railway - Gujarat

38126463 supply of for diesel depot : ball bearing 6305 2rs1 or 2rsh. accepted make skf / fag imported ( european origin ) or nsk / japan. ( for ac fuel pump motor , ac crank case exhauster motor and ac cyclonic filter dust exhauster blower motor. ) . [ warranty period: 30 months after the date of delivery ] => limited...

Indian Army - Gujarat

38111833 bids are invited for calcium hypochlorite granules for water treatment services of 2 nos fgm , suction sweeper , nylon rope 20mm dia , micron cartridge filter , rota meter , nrv , teflon tubing , suction strainer , brass fittings , nylon tubing , field mounted pressure gauge , panel mounted pressure gauge , permeate port fitting , pressure switch , brine control valve , solenoid valve , upvc pipe 40 mm bore , upvc pipe 50 mm bore , upvc ball valve 40 mm bore , upvc ball valve 50 mm bore , upvc multipurpose valve , chlorine dosing pump , ci foot valve 100 mm bore , ci foot valve 150 mm bore , pvc foot valve 50 mm bore , repair pumping set 3 5hp , repiar pumping set 7.5hp , ball bearing , gun metal bush , brass impellers , gun metal pump shaft , neck ring brass type , key for impellers , motor fan , rewinding motor 3 5hp , rewinding motor 7.5hp , silica quartz sand , activated carbon , ro membranes , brick work , pcc work , plastering work , mild steel iron framed work , mccb 160 amps 4 pole 25 ka 415 volts , mccb 100 amps 4 pole 16 ka 415 volts , mccb 63 amps 4 pole 16 ka 415 volts , mcb tp 63 amps 10 ka 415 volts , mcb tp 32 amps 10 ka 415 volts , mcb spn 16 amps 10 ka 230 volts , motor starter 7.5 hp , selector switch , push button , copper conductor cable 4 sqmm 3 core , frp strainer plate , pvc tank 10000 ltr triple layer , jambow bowl , special antiscalent for smooth functioning of ro plant , chlorination chemicals for smooth functioning of ro plant. , dechlorination chemicals for smooth functioning of ro plant , coagulant alum for smooth functioning of ro plant , ph correction chemicals for smooth functioning of ro plant , chemical dcc bior , chemical dcc inor , chemical dcc col , chemical dcc stor , crystal alum , copper sulphate , bleaching powder , high strength calcium base chlorine granules 65 70 percent , cleaning of tanks 1 47 total quantity : 15074...

Western Railway - Gujarat

38083998 supply of single row deep groove ballsingle row deep groove ball, single row deep groove ball bearing no. 6205zz , size : id 25mm x od 52mm x width 15mm, make : nsk / skf / fag / koyo or similar [ warranty period: 30 months after the date of delivery ] ...

Western Railway - Gujarat

38070856 supply of ball bearing 6306 with c3 clearance or equivalent rdso approved brands for auxiliary machine bearing including 3 phase locomotive / emu [ warranty period: 30 months after the date of delivery ] amm ( dl ) rtm , wr madhya pradesh 404.00 numbers => limited...

Western Railway - Gujarat

37978737 supply of ffor dsl sheds & parel. ) single row deep groove ball bearing skf no. 6311 acceptable brands skf / fag / nei / ntn. [ warranty period: 30 months after the date of delivery ] => limited...

Mahatma Gandhi National Rural Employment Guarantee Scheme - Gujarat

37936245 supplying and stacking various type of materials, at various talukaplaces of taluka panchayat savli , vadodara district under mahatmagandhi national rural employment guarantee act ( mgnrega ) 1 m615 white bela stone ( size to be measured ) 2 mr crc tmt steel 8, 10, 12, 16 mm dia ( fe 500 ) ( bis mark ) m689 tmt bar fe 500 d 3 mr cement ( 53 grade ) ppc ( bis mark ) 4 mr srpc cement ( grade 43 ) ( bis mark ) 5 m616 white cement 6 m181 crushed stone aggregate for hard quality ( 6 to 10 mm ) 7 m176 crushed stone aggregate for hard quality ( 10 to 20 mm ) 8 m180 crushed stone aggregate for hard quality ( 40 to 63 mm ) 9 m209 fine sand 10 m566 stone dust 11 m599 vitryfied granite tiles 8 mm to 10 m thick 24 x 24 size dark shade 12 m145 ceramic tiles 13 mr wall tiles ( 300 x 600 mm ) ( 5 mm thick ) 14 mr epoxy coated reinforcement steel ( bis mark ) 15 a050 door / window ( frame & shutter ) 35 mm thick including hing, stoppers etc complete 16 a053 35mm thick shutter enameled butt hinges ( a ) fully panelled 17 a052 35mm thick shutter alu. butt hinges ( c ) partly glazed 18 mr cement ventilator frame 19 mr bright bars grill 20 m490 polished kota stone slab green. 25 mm thick 21 m430 oil bound distemper ( two coats ) including primer 22 m608 water proofing cement paint 23 m617 white lime ( white washing ) 24 m194 dry distemper 25 m914 birla or asian acrylic lapy ( putty ) 26 m692 weather proof acrylic exterior emulsion paint 27 m092 binding wire of 18 gauge thick annealed iron 28 m908 paver block m200 grade 60mm thick 29 m910 paver block m250 grade 60mm thick 30 mr providing and fixing g.i. rain water spout of 50mm dia. and 30cm. length 31 m623 white vitrious ching w.c. sqatting pan ( india type ) 32 m592 urinal ladies squatting pan 33 m593 urinal squatting type 34 m211 flat back wash basin colour glazed 550 x 400 size 35 m449 p.v.c. pipes 6 kgf / sq.cm. 110 mm dia. 36 m450 p.v.c. pipes 6 kgf / sq.cm. 50mm dia. 37 m451 p.v.c. pipes 6 kgf / sq.cm. 75mm dia. 38 m798 u pvc sch40 for cold water 25 mm dia ( 1 ) 39 m799 u pvc sch40 for cold water 32 mm dia ( 1 1 / 4 ) 40 m800 u pvc sch40 for cold water 40 mm dia ( 1 1 / 2 ) 41 m801 u pvc sch40 for cold water 50 mm dia ( 2 ) 42 mr r.c.c. precast manhole frame m200 for 50cm opening 43 mr r.c.c. precast manhole cover m200 for 50cm opening 44 mr color coated roofing sheets, thickness of sheet: 0.45 mm 45 mr corrugated asbestos cement sheets 6 mm thick 46 m567 stone slab 100mm thickness 47 m768 gun metal wheel valve ( i ) 15 mm diameter. 48 m769 gun metal wheel valve ( i ) 20 mm diameter. 49 m770 gun metal wheel valve ( i ) 35 mm diameter. 50 m779 gully trap 100mm x 100 mm size. 51 m126 c.i. nahni trap 52 m131 c.p. brass 1 / 2 turn flush cock 20 mm dia 53 m132 c.p. brass 1 / 2 turn flush cock 25 mm dia 54 m104 brass screw down bib type. 15mm dia. 55 m105 brass screw down bib type. 20mm dia 56 m916 pvc water tank 57 mr china mosaic ( 12 to 20mm broken pieces ) 58 r & b elec i.no.5.1.1 ceiling fan with double ball bearing isi mark with condenser a.c. 23ov.50 c / s.1200 mm. 59 r & b elec i.no.5.2.5 providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or fan box. 60 r & b elec i.no.2.4.1. cat.iii approved make cfl retrofit 5 / 7 / 9 / 11 watt, erected if required 61 r & b elec i.no.2.16.2. cat.ii led light ( 4ft ) 18 to 20 watt isi mark 62 r & b elec moduler switch board ( including plugs and regulators ) 6 switch ( isi mark ) 63 r & b elec moduler switch board ( including plugs and regulators ) 4 switch ( isi mark ) 64 r & b elec holders for lamp, tubelight& fan ) isi mark ( standard quality ) 65 r & b elec disc for lamp, tubelight and fan 66 r & b elec adaptars isi mark ( standard quality ) 67 r & b elec robot isi mark ( standard quality ) 68 r & b elec main switch board with fuse isi mark ( standard quality ) 69 r & b elec pvc pipe 1 / 5 inch ( isi mark ) 70 r & b elec pvc pipe 1 / 2 inch ( isi mark ) 71 r & b elec wire 1mm ( isi mark ) 72 r & b elec wire 2.5mm ( isi mark ) 73 r & b elec earthing plate assembly ( isi mark ) 74 m274 hand broken stone aggregate 40mm size to 63mm size. 75 m167 common burnt clay bricks modular size 20x10x10 cm 76 mr hire charge of tractor trolly with driver 77 mr hire charge of concrete mixer 0.25 to 0.40 cum with hopper 78 mr hire charge of vibrator ( needal type 40 mm ) 79 mr hire charge of tata 407 or equivalent for local shifting 80 h011 hire charges for road roller 81 m622 white vitrious china sink 600mm x 450mm x 150mm 82 m673 water tanker 6 kl capacity 83 r & b elec i.no.1.2.7. ( 14 ) 6a / 10a / 16a / 20a / 25a / 32a double pole modular mcb switch ( iii ) 84 m263 gun metal wheel valve 15mm dia 85 mr community work sign board 4*5 fit 86 mr individual work sign board 3*4 fit 87 e012 extra cost of centering and shuttering 88 mr m.s. angle of any size as directed by engineer in charge 89 e005 extra for scaffolding 90 m112 c.i. cover with frame 300mm x 300mm 91 m115 c.i. cover with frame 600mm x 850mm 92 m224 g.i. barbed wire 93 mr steel door 0.75x2.10 mtr / kg 94 m494 precast rcc jali 100 mm thick 95 m495 precast rcc jali 25 mm thick 96 m496 precast rcc jali 40 mm thick 97 m497 precast rcc jali 50 mm thick 98 m498 precast rcc jali 75 mm thick 99 m505 quarry spall. 100 mr vermi compost 101 mr bhusa, millet, sarghum, groundnut, corn 102 mr13183 jasmine mogra 103 mr13185 piper betel ( nagar vel ) 104 mr13186 rat rani 105 mr13195 pipalo 106 mr13196 karen 107 l002 labour charges bhisti 108 l018 labour charges mason 1st class 109 mr mason ( for plaster of paris work ) 1st class 110 l025 labour charges plumber ( fitter ) 111 l040 labour charges beldar 112 l007 labour charges carpenter 1st class 113 l023 labour charges mistry 114 mr aluminum section shutter window with grill 115 ra providing fixing of polished marble color or black frame for door &windos, platform including necessary holdfasts holes for fixtures and fastenings incl. all labour & materials etc comp. 116 ra providing and fixing 35 mm thick panelled, glazed or panelled and glazed shutters for door, windows and clearstory window including anodised alluminiumbuthings with necessary screws and indian ordinary flush door shutter with ( b ) partical board panells. 12 mm thick including applying primer and tow coats of oil painting etc complete...

Ministry Of Railways - Gujarat

37925175 bids are invited for 1. mcb 10a double pole c curve 10ka make: l&t, c&s, legrand 100.nos sr. section engineer ( el / m ) rajkot el / rjt / m / 1 6 / 23 / 33 2. mcb 16a double pole c curve 10ka make: l&t, c&s, legrand 100..nos sr. section engineer ( el / m ) rajkot el / rjt / m / 1 6 / 23 / 34 3. mcb 20a double pole c curve 10ka, make: l&t, c&s, legrand 100.nos sr. section engineer ( el / m ) rajkot el / rjt / m / 1 6 / 23 / 35 4. inverter type five star rated split air conditioner 1.5 ton capacity refrigerant charged, piping , remote make lg, haier, blue star, godrej 39.nos section engineer ( el / rac ) rajkot rac / rjt / m s / 22 23 / 21 5. aluminium conductor cable 4 core 70 sq mm pvc insulated and pvc shealed armoured multi stranded as per is:1554 ( part 1 ) 1988 isi marked with amendment no 1 insulation resistance ( megger ) values must be greater than 100 mega ohm between cores and armoures makepolycab, avocab and allcab 1000.mtr section engineer ( el ) okha el / okha / m s / 23 / 29 6. brush less direct current 3 5 star rated ( bldc ) moter type ceiling fan 1200 mm with blade, remote and complete fitting. voltage 230 v ac, 50 hz , white colour, make usha, havells, cromption, bajaj . 40.nos section engineer ( el ) okha el / okha / m s / 23 / 31 7. brush less direct current 3 5 star rated ( bldc ) moter type ceiling fan 1200 mm working voltage 230 volt ac, 28watt, 50 hz with remote, blade, down road complete. colour : white make havells, bajaj, atomberg 100.nos section engineer ( el ) surendranagar el / sunr / m s / 8 / rjtdi. / 23 24 / in1 8. brush less direct current 3 5 star rated ( bldc ) moter type ceiling fan 1200 mm with downrod, remote complete fitting. working voltage 230 v 80.nos section engineer ( el ) okha el / okha / m s / 23 / 28 ac, 50 hz , white colour, make usha, havells, cromption, bajaj . 9. electric ceiling fan 1200 mm sweep with bldc fan motor consisting of double ball bearing , white color, remote control and other accessories. make : usha, crompton, orient, khaitan. 30.nos section engineer ( el ) hapa 856370131 53 10. brush less direct current 3 5 star rated ( bldc ) moter type ceiling fan 1200 mm with down road, remote complet fitting , working voltage 230 v ac , 50 hz white colour make: havells, orient, usha, cromp ton, philips, bajaj. 100.nos section engineer ( el ) okha el / okha / m s / 23 / 25...

Western Railway - Gujarat

37850874 supply of double row self aligning ball bearing for am.12 type pantograph make skf 2204 or equivalent rdso approved brands for auxilliary machine bearing including 3 phase locomotive / emu [ warranty period: 30 months after the date of delivery ] amm ( dl ) rtm , wr madhya pradesh 65.00 numbers => limited...

Western Railway - Gujarat

37832128 supply of single row deep groove ball bearing for arno converter make skf no.6316 with c3 clearance or equivalent rdso approved brands for auxiliary machine bearing including 3 phase locomotive / emu [ warranty period: 30 months after the date of delivery ] => limited...

Western Railway - Gujarat

37827679 supply of single row deep groove ball bearing for mcp make skf 6310 with c3 clearance or equivalent rdso approved brands for auxiliary machine bearing including 3 phase locomotive / emu. [ warranty period: 30 months after the date of delivery ] => limited...

Dakshin Gujarat Vij Company Limited - Gujarat

37827137 purchase of furniture for valod, dolvan, kapura subdivision office underjurisdiction of vyaradivision office, dgvcl 1 big sized steel cupboard ( multi purpose storage cabinate ) with 4 adjustable shelves providing & supplying multipurpose storage cabinet with 4 adjustable shelves making 5 compartments. all steel parts of the frame will be 20 / 22swg. crca is 513 ‘d’ grade 7 tanks antirust treated standard powder coating in plant. having locking arrangement with approved color equivalent to model no. jsf ( 101 ) a of jalaram, godrej std. brand. overall size: ( h 78 x w 36 x d 19 ) 2 medium sized steel cupboard ( multipurpose storage cabinet ) with 2 adjustable shelves providing & supplying multipurpose storage cabinet with 2 adjustable shelves and 1 full locker. all steel parts of the cabinet will be ( 20 / 22 swg. ) crca is 513 ‘d’ grade 7 tanks antirust treated standard powder coating in plant. having locking arrangement with approved color equivalent to model no. jsf ( 101 ) a of jalaram, godrej std. brand. overall size: ( h 48 × w 36 × d 19 ) 3 file cabinate 1320 x470 x623 mm providiing and supplying steel 4 drawer filing cabinate with automatic locking arrangement. each drawer will be mounted on derlin ball berings with souble extension telescopic channel. drawers having inbuit anti rebound mechanisum to prevent drawers to come out after it is pushed in. dawers have inbuilt antitipping mechanism to allow only one drawer to be opned at time. 4 multi purpose locker with 18 locker 1980×915 ×d485 mm, each locker 305x305mm providing & supplying multipurpose industrial locker with 18 lockers without inbuilt lock. all steel parts of the frame will be ( 20 / 22swg. ) crca is 513 ‘d’ grade 7 tanks antirust treated standard powder coating in plant. 5 sloted angle rack big open 1800x900x450 mm providing & supplying m.s. slotted angle rack ( open type ) with eight adjustable shelves, finished with all steel parts are finished in high quality marpol powder coated after 7 tanks antirust treatment. overall size: 1800x900x450, angle: 40 x 40 x 2mm ( 4 nos. ) shelves: 36” x 18” ( 20swg. 6 nos. ) corner plate: 8 nos. nuts & bolts: 64 nos., shoes: 4 nos. 6 3 seat perforated chair ( visitor ) providing and placing triple seat waiting chair using 16swg perforated powder coated steel sheet and back and framing silver colour powder coated steel 15mm crc pipes structure of required shape resting on 50mm crc pipes stand as design approved by engineer in charge. 7 office table small 1200x600x750 mm supplying / providing & assembling / arranging in position standard table having top surface of minimum 25mm thick plywood sheet, and side 18mm thick plywood sheet covered with all outer faces 1.0 mm thick and all inner faces 0.8 mm thick laminated sheet and edge of teakwood fascia patti 8 to 10 mm thick with seasom polished having necessary provision for wire management data / computer / telephone cabling. the inside drawer unit body size of ( 400x580x715mm ) 1 drawer & 1 shutter 18mmthick plywood sheet with, s.s hingies, lock & necessary hadware included. all supporting system should be matching with modular partition framing & final finish. rate is inclusive of keyboard tray run on telescopic ball bearing channel. keyboard tray of minimum 750 mm wide forming of plywood sheet 18 mm thick. 18 mm thick plywood sheet partiotion for cpu trolley and for leg rest is fixed with table. 8 office table medium 1500x750x750 mm supplying / providing & assembling / arranging in position standard table having top surface of minimum 25mm thick plywood sheet, and side 18mm thick plywood sheet covered with all outer faces 1.0 mm thick and all inner faces 0.8 mm thick laminated sheet and edge of teakwood fascia patti 8 to 10 mm thick with seasom polished having necessary provision for wire management data / computer / telephone cabling. the inside drawer unit body size of ( 400x580x715mm ) 1 drawer & 1 shutter 18mmthick plywood sheet with, s.s hingies, lock & necessary hadware included. all supporting system should be matching with modular partition framing & final finish. rate is inclusive of keyboard tray run on telescopic ball bearing channel. keyboard tray of minimum 750 mm wide forming of plywood sheet 18 mm thick. 18 mm thick plywood sheet partiotion for cpu trolley and for leg rest is fixed with table. 9 office table executive 1800x900x750 mm with side storage 1100x550x750mm supplying / providing & assembling / arranging in position standard table having top surface of minimum 25mm thick plywood sheet, and both side and front 18mm thick plywood sheet covered with all outer faces 1.0 mm thick and all inner faces 0.8 mm thick laminated sheet and edge of teakwood fascia patti 8 to 10 mm thick with seasom polished having necessary provision for wire management data / computer / telephone cabling and bottom flat of 150mm wide made on 25 mm thick plywood sheet with 1.0 mm thick laminated sheet. the drawer unit body size of ( 400x580x715mm ) 3 drawer 18mm thick plywood sheet with s.s hingies, lock & necessary hadware included. side storage with 2 shutter door made up of 18mm thick plywood sheet on top ad side and shutter with 18mm thick plywood sheet covered with all outer faces 1.0 mm thick and all inner faces 0.8 mm thick laminated sheet. all supporting system should be matching with modular partition framing & final finish. rate is inclusive of keyboard tray run on telescopic ball bearing channel. keyboard of minimum 750 mm wide tray forming of plywood sheet 18 mm thick. 18 mm thick plywood sheet partiotion for cpu trolley and for leg rest is fixed with table. 10 fix chair low back ( visitor chair ) supplying / providing low back steel chairs having high density moulded pu foam padding in seat and back with leather backing with armrests complete as per the salient technical features, specifications, design and direction of the engineer in charge. 11 revolving chair high back supplying / providing of revolving chair high back made out from multi bend plywood structure having 40 density foam sleepwell, class 3 hydraulic height adjustment of make rotvac, syncronic tilt mechanism, nylon glass filled caster wheel of make regal, handle of ms 16 gauge pipe with high quality chrome finish pu, base of chrome finish chair 26 inch diameter, rexine of neptune black coloured....equivalent to geeken model no. gp 162 12 revolving chair medium back supplying / providing of revolving chair medium back made out from multi bend plywood structure having 40 density foam sleepwell, class 3 hydraulic height adjustment of make rotvac, syncronic tilt mechanism, nylon glass filled caster wheel of make regal, handle of ms 16 gauge pipe with high quality chrome finish pu, base of chrome finish chair 26 inch diameter, rexine of neptune black coloured.....equivalent to geeken model no. gp 163 13 side storage / credenza 900x450x750 mm supplying / providing & assembling / arranging in position side and back storage cabinet having clear inside storable space minimum of 380mm depth. it should be made from 18mm plywood sheet covered with all outer side 1.0 mm thick and all inner side 0.8 mm thick laminated sheet as per specifications and as directed by the e i c. 14 double lock safe ( tijori ) 725x575x575 mm providing & supplying m.s. safe with 2 nos. of lock with individual keys. the inner structure of 3mm key high quality ms. plate and inner body will be 1.5mm thick in same plate. the door plate will be 10mm thick. door and body structure will be fire resistance. the upper lock will be 10 lever locking system and other lock will be 8 lever with s.s. key. final finish will be n.c. paint before black surface coating in inner side and side handle will be in s.s. for extra safety numbering locking system should be provided and drawer lock will be in 7 lever with s.s. keys. weight ( without packing ) : 400 kg. 15 plastic chair with arm providing & supplying plastic premium arm chair crafted from 100% p.p. quality plastic. durable bands and strengthen joints for aesthetic design available in whether brown & biscuit color.model supreme, cello, neelkamal or national make. 16 light duty 5ft.alluminum foldeble ladder...

Dakshin Gujarat Vij Company Limited - Gujarat

37826963 purchase of furniture on annual rate contract basis for rander division and its s / dn office under surat city circle= big sized steel cupboard ( multipurposes to rage cabinate ) with 4 adjustable shelves , medium sized steel cupboard ( multipurpose storage cabinet ) with 2 adjustable shelves , file cabinet 1320 x470 x623 mm , multi purpose locker with 18 locker 1980×915 *d485 mm, each locker 305x305mm providing & supplying multipurpose industrial locker with 18 lockers without inbuilt lock. all steel parts of the frame will be ( 20 / 22swg. ) crca is 513 d grade 7 tanks antirust treated standard powder coating in plant. sloted angle rack big open 1800x900x450 mm providing & supplying m.s. slotted angle rack ( open type ) with eight adjustable shelves, finished with all steel parts are finished in high quality marpol powder coated after 7 tanks antirust treatment. overall size: 1800x900x450, angle: 40 x 40 x 2mm ( 4 nos. ) shelves: 36 x 18 ( 20swg. 6 nos. ) comer plate: 8 nos. nuts & bolts: 64 nos., shoes: 4 nos. 3 seat perforated chair ( visitor ) providing and placing triple seat waiting chair using 16swg perforated powder coated steel sheet and back and framing silver colour powder coated steel 15mm crc pipes structure of required shape resting on 50mm crc pipes stand as design approved by engineer in charge. office table small 1200x600x750 mm office table medium 1500x750x750 mm supplying / providing & assembling / arranging in position standard table having top surface of minimum 25mm thick plywood sheet, and side 18mm thick plywood sheet covered with all outer faces 1.0 mm thick and all inner faces 0.8 mm thick laminated sheet and edge of teakwood fascia patti 8 to 10 mm thick with seasom polished having necessary provision for wire management data / computer / telephone cabling. the inside drawer unit body size of ( 400x580x715mm ) 1 drawer & 1 shutter 18mm thick plywood sheet with, s.s hingies, lock & necessary hadware included. all supporting system should be matching with modular partition framing & final finish. rate is inclusive of keyboard tray run on telescopic ball bearing channel. keyboard tray of minimum 750 mm wide forming of plywood sheet 18 mm thick. 18 mm thick plywood sheet partiotion for cpu trolley and for leg rest is fixed with table. office table executive 1800x900x750 mm with side storage 1100x550x750mm supplying / providing & assembling / arranging in position standard table having top surface of minimum 25mm thick plywood sheet, and both side and front 18mm thick plywood sheet covered with all outer faces 1.0 mm thick and all inner faces 0.8 mm thick laminated sheet and edge of teakwood fascia patti 8 to 10 mm thick with seasom polished having necessary provision for wire management data / computer / telephone cabling and bottom flat of 150mm wide made on 25 mm thick plywood sheet with 1.0 mm thick laminated sheet. the drawer unit body size of ( 400x580x715mm ) 3 drawer 18mm thick plywood sheet with s.s hingies, lock & necessary hadware included. side storage with 2 shutter door made up of 18mm thick plywood sheet on top ad side and shutter with 18mm thick plywood sheet covered with all outer faces 1.0 mm thick and all inner faces 0.8 mm thick laminated sheet. all supporting system should be matching with modular partition framing & final finish. rate is inclusive of keyboard tray run on telescopic ball bearing channel. keyboard of minimum 750 mm wide tray forming of plywood sheet 18 mm thick. 18 mm thick plywood sheet partiotion for cpu trolley and for leg rest is fixed with table. fix chair low back ( visitor chair ) supplying / providing low back steel chairs having high density moulded pu foam padding in seat and back with leather backing with armrests complete as per the salient technical features, specifications, design and direction of the engineer in charge. revolving chair high back supplying / providing of revolving chair high back made out from multi bend plywood structure having 40 density foam sleepwell, class 3 hydraulic height adjustment of make rotvac, syncronic tilt mechanism, nylon glass filled caster wheel of make regal, handle of ms 16 gauge pipe with high quality chrome finish pu, base of chrome finish chair 26 inch diameter, rexine of neptune black coloured....equivalent to geeken model no. gp 162 revolving chair medium back supplying / providing of revolving chair medium back made out from multi bend plywood structure having 40 density foam sleepwell, class 3 hydraulic height adjustment of make rotvac, syncronic tilt mechanism, nylon glass filled caster wheel of make regal, handle of ms 16 gauge pipe with high quality chrome finish pu, base of chrome finish chair 26 inch diameter, rexine of neptune black coloured..... equivalent to geeken model no. gp 163 side storage / credenza 900x450x750 mm supplying / providing & assembling / arranging in position side and back storage cabinet having clear inside storable space minimum of 380mm depth. it should be made from 18mm plywood sheet covered with all outer side 1.0 mm thick and all inner side 0.8 mm thick laminated sheet as per specifications and as directed by the e i c. double lock safe ( tijori ) 725x575x575 mm providing & supplying m.s. safe with 2 nos. of lock with individual keys. the inner structure of 3mm key high quality ms. plate and inner body will be 1.5mm thick in same plate. the door plate will be 10mm thick. door and body structure will be fire resistance. the upper lock will be 10 lever locking system and other lock will be 8 lever with s.s. key. final finish will be n.c. paint before black surface coating in inner side and side handle will be in s.s. for extra safety numbering locking system should be provided and drawer lock will be in 7 lever with s.s. keys. weight ( without packing ) : 400 kg. plastic chair with arm providing & supplying plastic premium arm chair crafted from 100% p.p. quality plastic. durable bands and strengthen joints for aesthetic design available in whether brown & biscuit color.model supreme, cello, neelkamal or national make. light duty 5ft.alluminum foldeble ladder...

Department Of Atomic Energy - Gujarat

37826655 bids are invited for supply of ball bearing deep groove ball bearing as per technical specification , tapper roller bearing as per technical specification total quantity : 20...