white wash Tenders in Gujarat

1
Military Engineer Services - Gujarat

45706584 tender for provision of certain minor works at icgs mundra under age (i) (cg) jakhau; 1 surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil. 2 excavating in post holes (or similar holes) each n exc 0.5 cum in soft/ loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified as directed. 3 excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft / loose soil complete all as specified and directed. 4 returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm in soft / loose soil complete all as specified and directed. 5 removing excavated material (soils) exc. 50m and n.exc 100m and depositing where directed at a level n exc. 1.5 m above the starting point. 6 m&l for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering. 7 m&l for hard core of gauge n.exc 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone or boulders. 8 m&l for 75 mm thick cement concrete type d 2, 1:4:8 (40mm graded aggregate) in sub floors, sub bases, floors and pavings etc. 9 m&l for 100 mm thick cement concrete type d 2, 1:4:8 (40mm graded aggregate) in sub floors, sub bases, floors and pavings etc. 10 m&l for 100 mm thick cement concrete type b 2, 1:2:4 (40mm graded aggregate) in sub floors, sub bases, floors and pavings etc. 11 m&l for cement concrete 1:4:8 type d2, using 40mm graded stone aggregate in foundation, filling and mass concrete, complete all as specified and directed by engr in charge. 12 m&l for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade a. 13 m&l for precast pcc block masonry type in cm 1:5:8 with soild block of any size and set in cm 1:6 complete all as specified and directed by engr in charge. 14 m&l for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed by engineer in charge. 15 m&l for cement concrete 1:2:4 type b1, using 20mm graded stone aggregate for embedding posts, complete all as specified and directed by engr in charge. 16 s & f steel work in tubular trusses including special shaped washer etc. complete using erw or induction butt welded tubes conforming to i. s.1161 1979 grade st. 240,etc complete all as specified and directed. 17 s & f plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, fe 410 w (gde e 250) quality a, etc with ornamental and intricate design complete all as specified and directed. 18 s & f mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long, diameter of neck exc 12 but n exc 20 mm,etc complete all as specified and directed. 19 s & f pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. 20 m&l for preparation of new steel surface over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. 21 m&l forpreparation of newly plastered surfaces of wall andapplying three coats of white wash complete all as specified. 22 supplying and laying synthetic rubber insulated mats 2.5mm thick for voltage upto 11 kv for electrical purpose as per is 15652 2006,(superseding is 5424)suitable for electrical shock safety of sizes 2m x 1m. 23 s&f stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. 24 s&f anodised aluminium flats for fixing wire mesh including screws, nails for fixing and drilling of holes. 25 m&l for chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and pigments set, jointed and pointed in neat cement slurry in floors, over and including 15 mm thick screed bed in cm 1:6 all as specified and directed. 26 s&f for aluminium composite panel of 4mm thick exterior grade on structural steel with combination of aluminium skin material of 0.25mm thick (two or more metallic coloured coating sheet as directed) aluminium sheet of alloy grade 1100 h14 cover material, coated on external side with pvdf coating containing 70% resins for anti fungal and anti bacterial properties and the center core shall be with natural polythelene (hdpe) bonded to the aluminium skin on both side as required coast guard pictures, logo letters or figures (block, roman, italic or indian) with blue and white coloured self adhesive, fixed on aluminum composite panel etc complete all as specified. cladding panel to be fixed with rawl plug and ss screw all as approved on roof truss/ ms tube including necessary accessories, complete all as per manufacturers instructions and as directed by engr in charge. 27 material & labour for providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. ...

Due Date : November 01, 2024

Tender Value : ₹ 7 Lakhs

View Tender
2
Arcelor Mittal Nippon Steel India Limited - Gujarat

45657569 tender for civil works for cooling towers and other struc in 27021890 10 10 10 breaking chipping pile heads incl dispos 5,700 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 2 27021890 20 20 10 reinforcement work 6 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 3 27021890 30 30 10 reinforcement work 6,300 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 4 27021890 40 40 10 s&f m.s. plates for anchor box,bolt fix 6 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 5 27021890 50 50 10 pro. & fixing foundation bolt all size 6 ton email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 6 27021890 60 60 10 s&f ms plate insert flat, angl, c, lugs 4 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 7 27021890 70 70 10 s&f g.s. pipe,bend, slev/conduits 9 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 8 27021890 80 80 10 s&f ms tube/tubular handrail,pipe,slevee 4 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 9 27021890 90 90 10 excavation of soil 600 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 10 27021890 100 100 10 manual excavation of soil 600 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 11 27021890 110 110 10 backfilling and levelling 6,000 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 12 27021890 120 120 10 backfilling and levelling 3,000 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : page 2 of 5 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000121739 date 08.10.2024 submission date 18.10.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq ms. keshar sonal contact email keshar.sonal@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 13 27021890 130 130 10 backfilling and levelling 32,000 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 14 27021890 140 140 10 concrete work 4,500 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 15 27021890 150 150 10 concrete work 100 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 16 27021890 160 160 10 concrete work 500 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 17 27021890 170 170 10 concrete work 42,000 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 18 27021890 180 180 10 concrete work 8,000 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 19 27021890 190 190 10 s&f precast r.c. un of concrete grade 150 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 20 27021890 200 200 10 providing & laying grouting 45 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 21 27021890 210 210 10 construction of flooring works with mat. 15,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 22 27021890 220 220 10 structural steel supply, fab & erection 9 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 23 27021890 230 230 10 erection of structural steel as per drg. 6 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 24 27021890 240 240 10 erection of structural steel as per drg. 4 to email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 25 27021890 250 250 10 shuttering incl.material as per drg. 125,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 26 27021890 260 260 10 shuttering incl.material as per drg. 35,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 27 27021890 270 270 10 shuttering incl.material as per drg. 1,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : page 3 of 5 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000121739 date 08.10.2024 submission date 18.10.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq ms. keshar sonal contact email keshar.sonal@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 28 27021890 280 280 10 shuttering incl.material as per drg. 4,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 29 27021890 290 290 10 shuttering incl.material as per drg. 2,500 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 30 27021890 300 300 10 dismantling of rcc & brick masonry 24 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 31 27021890 310 310 10 dismantling of rcc & brick masonry 10 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 32 27021890 320 320 10 inject polymeric waterpf grout thr nozle 20 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 33 27021890 330 330 10 inject polymeric waterpf grout thr nozle 160,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 34 27021890 340 340 10 water proofing of terrace area floor 15,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 35 27021890 350 350 10 s&l 2c cemnt w/f compound like sika,basf 40,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 36 27021890 360 360 10 conducting plate load test 5 no email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 37 27021890 370 370 10 pile routine vertical load test 18 no 20 pile uplift test incl all accessories 18 no 30 pile rutin vrticl load test incl all acc 18 no 40 pile integrity test incl all accessories 5,700 no email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 38 27021890 380 380 10 10 mm 2,000 cm 20 12 mm 2,400 cm 30 16 mm 3,000 cm 40 20 mm 4,000 cm 50 25 mm 5,000 cm 60 32 mm 6,500 cm email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 39 27021890 440 390 10 providing & fixing cladding material 5,000 m2 20 supply, fab. ere. metal deck 5,000 m2 30 s&f(pressed steel flush door) 200 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 40 27021890 450 400 10 s&f of ms window 50 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 41 27021890 460 410 10 s&f of ms window 50 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : page 4 of 5 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000121739 date 08.10.2024 submission date 18.10.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq ms. keshar sonal contact email keshar.sonal@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 42 27021890 470 420 10 s&f of ms window 50 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 43 27021890 480 430 10 s&f aluminium window 50 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 44 27021890 490 440 10 s&f aluminium window 50 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 45 27021890 500 450 10 providing and laying brick masonry 1,500 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 46 27021890 510 460 10 providing and laying brick masonry 1,500 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 47 27021890 520 470 10 b/w half brick thick burnt clay 1,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 48 27021890 530 480 10 masonary work 1,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 49 27021890 540 490 10 providing & laying block masonry 1,500 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 50 27021890 550 500 10 providing & laying block masonry 1,500 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 51 27021890 560 510 10 providing & laying block masonry 1,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 52 27021890 570 520 10 providing & laying block masonry 1,500 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 53 27021890 580 530 10 providing & laying block masonry 1,500 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 54 27021890 590 540 10 providing & laying block masonry 1,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 55 27021890 600 550 10 6mm thick cement plaster 5,000 m2 20 plaster (1:4) 12 mm one operation 5,000 m2 30 plaster (1:4) 20 mm two operation 5,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 56 27021890 610 560 10 making grooves in plaster 10mmx10mm 1,000 m 20 making grooves in plaster 25mmx10mm 1,000 m email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : page 5 of 5 arcelormittal nippon steel india limited am/ns hazira plant 27th km, surat hazira road,,hazira,394270,gujarat,india gstin 24aaace1741p1zn pan aaace1741p cin u27100gj1976flc013787 request for quotation number 6000121739 date 08.10.2024 submission date 18.10.2024 coll req no amns deals with oems directly. we are very well equipped in every way to import / buy our goods directly from oems from any part of the world in a professional manner. we also use the vast global networks of our parent companies where necessary. we do not welcome any contact from intermediaries or indian agents of vendors. we assure all oems that you do not need to engage anyone to manage your transactions with us.kindly respond to our rfqs and deal with our officials directly without involving any agents or intermediaries. offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. contact for this rfq ms. keshar sonal contact email keshar.sonal@amns.in materials / services please acknowledge receipt of the rfq and provide your best quote for below given rfq details. sr. no pr no. pr item rfq item services for line item quantity uom technical details other details 57 27021890 620 570 10 plastering job 1,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 58 27021890 630 580 10 plastering job 1,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 59 27021890 640 590 10 providing &apply white wash incl. all 10,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 60 27021890 650 600 10 s&a 2coats of colour incl. all 2,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 61 27021890 660 610 10 p&a two coats of acrylic emulsion paint 2,500 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 62 27021890 670 620 10 s&l 2coats ex cement paint appr primer 2,500 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 63 27021890 680 630 10 s&a 2coats acrylic emulsion interior 5,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 64 27021890 690 640 10 p & a two coats of oil bound distemper 2,000 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 65 27021890 700 650 10 supply & fixing of rolling shutters 200 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 66 27021890 710 660 10 supply & fixing of rolling shutters 200 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 67 27021890 720 670 10 providing & fixing of wire mesh 200 m2 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 68 27021890 730 680 10 s&f hdpe down pipes all dept ht 110 mm d 500 m 20 s&f hdpe down pipes all dept ht 160 mm d 500 m email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 69 27021890 740 690 10 s&f acrylic polymer swellable water stop 500 m email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note : 70 27021890 750 700 10 mechanized excavation of soil 30,000 m3 email : gulrezakhtar.olayee@amns.in contact : name : gulrez akhtar olayee item details : item note :...

Due Date : October 18, 2024

Tender Value : ₹ Ref. Documents

View Tender
3
Road And Building Department - Gujarat

45654414 tender for current repair to various roads of rajkot kotdasangani paddhari taluka under r&b sub division rajkot (providing jungle cutting, geru—chuna, white wash)....

Due Date : October 21, 2024

Tender Value : ₹ 9.62 Lakhs

View Tender
5
Road And Building Department - Gujarat

45643328 cr to various roads of rajkot kotdasanghani padadhari taluka under dist. r&b sub division rajkot (providing jungle cutting, geru chuno and white wash)...

Due Date : October 21, 2024

Tender Value : ₹ 9.62 Lakhs

View Tender
6
Road And Building Department - Gujarat

45569846 current repair to various roads of lodhika and rajkot taluka under dist. r&b division rajkot providing jungle cutting geru chuno and white wash)...

Due Date : October 16, 2024

Tender Value : ₹ 6.12 Lakhs

View Tender
7
Narmada Water Resources - Gujarat

45354730 providing railing at one side of dewiding wall, right side and left side of training wall, & white wash to guard stone, curbing wall, man hole, catch water drain & perapet of machchhu 2 irrigation scheme....

Due Date : October 05, 2024

Tender Value : ₹ 6.45 Lakhs

View Tender
9
Military Engineer Services - Gujarat

45269065 tender for provision of pol store at afs vadodara; 1 m&l surface dressing n exc 15 cm deep complete all as specified and directed 2 excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in loose/softsoil complete all as specified 3 excavating in trenches n. exc 1.5 mtr wide & exc 1.5 mtr and not exc 3 mtr in depth for foundation etc and getting out in in loose/softsoil complete all as specified. 4 returning , filling in, including spreading levelling, watering and well ramming in layers n.exc 25cm in soil complete all as specified 5 m & l sand filling under floors or in foundation including watering and consolidation as in bedding layers for laying tiles complete all as specified. 6 removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting points in soil complete all as specified 7 m&l hardcore of broken stone or boulder of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified. 8 m&l moorum filling in floors or pavings, laid in layers n.exc 15 cm thick spread, levelled and blinded with earth and rammed including watering complete all as specified 9 m & l pcc 1:4:8 type d 2 using 40 mm .graded stoneaggregate in foundation complete all as specified 10 m & l pcc 1:3:6 type c1 using 20 mm graded stoneaggregate cement concrete in roof kerbs or mud stops, rounded or chamfered on edgescomplete all as specified 11 m&l rcc m 25 (design mix) using 20mm graded stoneaggregate asin foundation including raft footing, foundation beams, plinth beams, bases of columns etc complete all as specified 12 m&l rccm 25 (design mix) using 20mm graded stoneaggregate as in columns complete all as specified 13 m&l rccm 25 (design mix) using 20mm gradedstone aggregate as in beam, cantilevers, lintels etc and the like complete all as specified 14 m&l rccm 25 (design mix) using 20mm gradedstone aggregate as in chajjascomplete all as specified 15 m&l rccm 25 (design mix) using 20mm graded stoneaggregate as in slab supported on walls complete all as specified. 16 m&l brick work in sub class b bricks straight or curve on plan exceeding 6 mtr mean radius built in cm1:4complete all as specified 17 m&l use & waste of form work for rough finished flat surfaces to sides of concrete of foundation, footings, bases of columns and similar work vertical or to batter complete all as specified. 18 m&l use & waste of form work for rough finished flat surfaces of concrete in chajja/shelves complete all as specified. 19 m&l use & waste of form work for rough finished flat surfaces of concrete in beams, lintels including support etc complete all as specified. 20 m&l use & waste of form work for rough finished flat surfaces of concrete to sides of pillars post, struts piers, columns and stanchions etc complete all as specified.. 21 m&l use & waste of form work for edges of concrete flats, treads, breaks floors, window cills, opening in concrete walls, floor, roofs, n exc 20cm wide and side of rcc, pcc bands in walls horizontal or sloping and similar works exc 10cm but nexc 20cm wide complete all as specified.. 22 m&l mild steel 0.63 mm thick plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitred angles etc as required complete all as specified. 23 m&l tmt bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns,hooping ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified 24 m&l tmt bars 6mm to 8 mm dia and over cut to length bent to shape required includingcranking, bending spirally for hoping for columns, hooping ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified 25 m&l tmt bars5mm dia and over up to and including 10mm dia in stirrups, spacers and binders binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified complete all as specified 26 m&lframed work fe 410 w (grade e 250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified. 27 m&l machine cut kota stone slab 20 25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over and including 10mm thick screed bed in cm 1:4 completeall as specified 28 m&lmachine cut kota stone slab 20 25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishingover and including 10mm thick screed bed in cm 1:4 complete all as specified 29 m&l 75 mm thick cement concrete type b2 1:2:4 ( 40 mm graded stoneaggregate) in floors etc complete all as specified 30 m&l 75 mm thick pcc 1:3:6 type c 2 using 40mm gradedstone aggregates as in plinth protection , finished surfaces even and smooth without using extra cement, complete all as specified 31 m&l 75mm thick pcc 1:4:8, type d 2 using 40mm gradedstone aggregates as in sub base for pavement, path, floor etc complete all as specified. 32 m&l25mm thick cement concrete type b0 1:2:4 using 12.5mm graded stone aggregate in floors complete all as specified 33 m&l applying cold bituminous primer @ 0.30 ltr/sqm conforming to is 3384 and laying app polymer modified fibre glass reinforced membrane 3mm thick 3.5kg/sqm (modified bituminous water proofing membrane) with plain finish with polyester base reinforcement sealing all the over laps of 75 mm in length side and 100 mm on the width side of membrane by torching the same all as per manufacturer instruction including one coat of bituminousaluminium paint @ 0.10 ltr/sqm over membranecomplete all as specified. 34 m&l 0.63mm thickmild steelplain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams including bending or turning up mitred angles etc complete all as specified 35 m&l machine pressed precast concrete interlocking paver block any shape and size confirming to is 15658 2006 of 60 mm thickness, m 35 grade with gray cement and no pigment (as in road berm), complete all as specified 36 m&l 10 mm thick rendering on fair faces of concrete surfaces in cm 1:6 and finished even and smooth without using extra cement complete all as specified 37 m&l 10 mm thick rendering on fair faces of concrete surfaces in cm 1:4 as backing coat for tiles on vertical surfaces without using extra cement complete all as specified 38 m&l5 mm thick rendering in cm 1:3 mixed with water proofing compound @ 3% by weight of cement on ceiling complete all as specified 39 m&l rendering 15mm thick in two layers, first coat 10mm thick in cm 1:4 and second coat 5mm thick in cm 1:4 mixed with water proofing compound @ 3% by weight of cement on concrete block masonry surfaces finished even and smooth without using extra cement as specified. 40 m&l screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finished complete all as specified 41 m&l screed bed or bedding layer of cement mortar 1:4, 15mm thickfor laying floor mixed with water proofing compound @ 3% by weight of cement on concrete block masonry surfaces finished even and smooth without using extra cement complete all as specified 42 m&l preparing new surfaces plastered or un plastered & applying three coats of white wash on undecorated wall surfaces and ceiling surface complete all as specified 43 m&l preparation of new plastered surfaces of wallapplyingtwo coats of oil bound distemperoverone coat of alkali resistant paint & including 1mm thick wall careputty on wall completedall as specified 44 m&l preparation of new plastered surfacesandapplying two coats of cement based paint over acoat of primer with alkali resistant priming coat complete all as specified 45 m&l preparation of new plastered surfaces on wall/concrete surfaces and apply two coats of cement base paint camouflage pattern as approved by ge up to 4 floor high complete all as specified 46 m&l preparing new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over coat of red oxide primer complete all as specified 47 m & l point wiring with frls copper conductor cables in erw pipe of 16 swg with accessories, joint boxes/ terminal boxes 60mm deep with 3 mm thick plastic laminated sheet cover for mounting or housing switches and continuous earthing and earthing connections for one light controlled by one switch with frls single core sheathed multistrand copper cables 1.5 sq.mm size including earth wire complete all as specified and directed. 48 m & l point wiring with frls copper conductor cables in erw pipe of 16 swg with accessories, joint boxes/ terminal boxes 60mm deep with 3 mm thick plastic laminated sheet cover for mounting or housing switches and continuous earthing and earthing connections for one fan point controlled by one one/way switch with frls single core sheathed multistrand copper cables 1.5 sq.mm size including earth wire complete all as specified and directed.. 49 s&f switch flame proof rotary type with termination box in lm6, 16a, single pole 250v complete all as specified and directed. 50 s&f led 20 watt tube light flameproof type flp wp made of aluminium alloy lm6, with electronic ballast, bipin holders, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 4 feet complete all as specified and directed. 51 s&f led 30 watt bulk head fixture 30wattt flameproof type flp wp made of aluminium alloy lm6, connector block, etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size 4 feet complete all as specified. 52 s&f lm6 flame proof exhaust fan of size 300mm with louvers including cutting of chases with louver complete all as specified 53 s&fflame proof weather proof sheet metal enclosures single door mcb db spn 4 way in cast aluminium alloy lm6 construction comprising of following: (a).mcb flp/wp spn 25 amps 10ka, 240v 1 no(b).mcb flp/wp sp 10 amp 10 ka, 240 v 2 nosmake cat part no : sspl/cs/174 of shyam or equivalent 54 m&l earthing complete as per electrical plate no.3 of mes ssr part i with galvanised steel plate earth electrode 600 mm x 600mm x 6 mm burried directly in ground in a pit of depth not less than 2.25 metre below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and inclu galvanised iron or steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel earthing wire protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe shall be 20 mm dia gi medium gradeincluding excavation and earth work in any type of soil, pcc pit, ci frame, rcc covers complete all as specified 55 m & l sand cushioning to undergroundcables with sand completeall as specified in clause 19.75 of ssr part 1 56 supply and laying un reinforced precast concrete cable cover, class lv, type 1 size 250mm x 150mm x 40mm. 57 supply and laying & testing10 sqmm 2 core xlpe cable pvc insulated screened pvc bedded, galvanised steel strip or wire armoured, electric power cable , (heavy duty), 1100 volts grade with stranded aluminium conductor complete all as specified and directed 58 s & f gi pipe line 50 mm bore light grade with all fittings, fixing on wall included supporting clamp / laid in trenchesfor cable protection complete all as specified ...

Due Date : October 21, 2024

Tender Value : ₹ 14.30 Lakhs

View Tender
10
Cricket Association - Gujarat

45262344 tender for plumbing work, fabrication work, electric works, fire safety work, lift work, glass facade work, colour work, white wash, window and door framing work...

Due Date : September 24, 2024

Tender Value : ₹ Ref. Documents

View Tender
11
Arcelor Mittal Nippon Steel India Limited - Gujarat

44107568 tender for civil works for canteen facility for project at vzg lcn o pr no. pr item rfq item services for line item quantity uom technical details other details 1 27020959 10 10 10 excavation 183.4 m3 20 back filling 129.16 m3 30 pcc 29.33 m3 40 providing & laying of rcc (m 30) 69.91 m3 50 steel handling from 6mm dia to 32 dia 7 to 60 providing & fixing shuttering 136.5 m2 70 50 mm thk. ips flooring incl.sand,curing 300 m2 email : emani.dilip@amns.in contact : 8712637632 name : dilip, emani am/ns india operations item details : all ppe and items are in vendor scope.cement and steel wiil be supply by am/ns all other material for construction,safety scaffolding and shuttering are in vendor scope all statuory compliance need to be follow bty vendor as per amnsi safety standards. item note : 2 27020959 20 20 10 excavation 195 m3 20 back filling 136 m3 30 pcc 15 m3 40 providing & laying of rcc (m 30) 66 m3 50 steel handling from 6mm dia to 32 dia 6 to 60 brick work of 115 mm thick incl. bricks, 32.82 m2 70 plastering with cement 260.8 m2 80 white wash 204.8 m2 90 supply &fixingof aluiminum doors&windows 17.445 m2 100 providing & fixing shuttering 353.04 m2 110 fixing of checkered tiles 64.8 m2 email : emani.dilip@amns.in contact : 8712637632 name : dilip, emani am/ns india operations item details : all ppe and items are in vendor scope.cement and steel wiil be supply by am/ns all other material for construction,safety scaffolding and shuttering are in vendor scope all statuory compliance need to be follow bty vendor as per amnsi safety standards. item note : 3 27020959 30 30 10 excavation 183.4 m3 20 back filling 129.16 m3 30 pcc 29.33 m3 40 providing & laying of rcc (m 30) 69.91 m3 50 steel handling from 6mm dia to 32 dia 7 to 60 providing & fixing shuttering 136.5 m2 70 50 mm thk. ips flooring incl.sand,curing 300 m2 email : emani.dilip@amns.in contact : 8712637632 name : dilip, emani am/ns india operations item details : all ppe and items are in vendor scope.cement and steel wiil be supply by am/ns all other material for construction,safety scaffolding and shuttering are in vendor scope all statuory compliance need to be follow bty vendor as per amnsi safety standards. item note : 4 27020959 40 40 10 excavation 195 m3 20 back filling 136 m3 30 pcc 15 m3 40 providing & laying of rcc (m 30) 66 m3 50 steel handling from 6mm dia to 32 dia 6 to 60 brick work of 115 mm thick incl. bricks, 32.82 m2 70 plastering with cement 260.8 m2 80 white wash 204.8 m2 90 supply &fixingof aluiminum doors&windows 17.445 m2 100 providing & fixing shuttering 353.04 m2 110 fixing of checkered tiles 64.8 m2 email : emani.dilip@amns.in contact : 8712637632 name : dilip, emani am/ns india operations item details : all ppe and items are in vendor scope.cement and steel wiil be supply by am/ns all other material for construction,safety scaffolding and shuttering are in vendor scope all statuory compliance need to be follow bty vendor as per amnsi safety standards. item note : 5 27020959 50 50 10 excavation 312.032 m3 20 back filling 34.496 m3 30 pcc 8.912 m3 40 providing & laying of rcc (m 30) 23 m3 50 steel handling from 6mm dia to 32 dia 2.1 to 60 providing & fixing shuttering 94.08 m2 email : emani.dilip@amns.in contact : 8712637632 name : dilip, emani am/ns india operations item details : all ppe and items are in vendor scope.cement and steel wiil be supply by am/ns all other material for construction,safety scaffolding and s...

Due Date : July 14, 2024

Tender Value : ₹ Ref. Documents

View Tender
12
Ministry Of Road Transport And Highways - Gujarat

43679500 maintenance and repair to nh251 una diu and diu kesariya road km 0.0 to 19.0 nh351g nageshree amreli road km 00.00 to 78.700 and nh351k bagasara una road km 0.0 to 101.100 under nhsd kodinar painting and white wash works including labour materials and machinery...

Due Date : June 26, 2024

Tender Value : ₹ Ref. Documents

View Tender
15
Jawahar Navodaya Vidyalaya - Gujarat

43572688 tender for supply of 1) computer stn. & peripherals 2) acid, phenyl & other cleaning items 3) selling of scrap 4) electrical materials 5) computer amc 6) bakery items 7) plumbing items 8) washing & ironing of cloth 9) hair cutting 10) toilet & bathroom doors 11) tuck shop 12) aluminum section door & windows 13) iron door & window work 14) sawpits & drainage line cleaning work 15) tractor, jcb on haring 16) cctv camera amc 17) paint materials 18) white wash paint labour 19) building materials 20) milk & other milk items...

Due Date : June 26, 2024

Tender Value : ₹ Ref. Documents

View Tender
16
Jawahar Navodaya Vidyalaya - Gujarat

43414112 tender for supply of following items /services for the year 2024 25 1) grocery (kirana iterms) 2) vegetables 3) fruits 4) grinding 5) sweet/ dairy items 6) colour materials 7) hiring of tractor, jcb, for m&r work 8) computer a.m.c 9) electric items 10) construction (m & r) items 11) tuck shop/pco on contract 12) white wash & coloring with labour 13) maintenance water purifiers 14) mud pump on hire basis 15) students hair cutting 16) press & washing 17) sports items 18). plumbing items 19) serap selling old news paper, oil tin etc 20) unused (condemned items) (furniture items bedding items, office equipments...

Due Date : June 12, 2024

Tender Value : ₹ Ref. Documents

View Tender
17
Jawahar Navodaya Vidyalaya - Gujarat

43388123 tender for supply of vegetable, grocery, fresh vegetable and fruits, vegetable grinding, sweets/ bakery, annual maintenance contract of r.o plant, cleaning items, photocopy xerox work, tuk shop, labour for white wash/ paint, hair cutting, washing and ironing, hiring of tractor, jcb, rotovator, sale of old computer and peripherals, waste papers, empty d rum, cement, grit, sand for building work, hiring of school vehicle....

Due Date : June 04, 2024

Tender Value : ₹ Ref. Documents

View Tender
18
Nagar Palika Nigam - Gujarat

42991038 annual rate contract for various types of civil / construction work with material and labour and machineries for valsad nagarpalika, valsad. (year : 2024 25) 0.00 81 providing and fixing rcc heavy duty (35 ton capacity ) cost of various size ant various place of valsad nagarpalika area incuding cost of cover frame and any type of excavation, brick masonary 1.00 nos. 0.00 81.1 inside dimensions 750.00 mm x 750.00 mm 1.00 nos. 0.00 81.2 inside dimensions 900.00 mm x 900.00 mm 1.00 nos. 0.00 81.3 inside dimensions 1050.00 mm x 1050.00 mm 1.00 nos. 0.00 82 supply of electric breaker machine with operator, etc with all taxes complete. 1.00 per hour 0.00 83 providing fabricated collapsible barricades size for 4 x 10 design approval by engg in charge. 1.00 per kg. 0.00 84 providing, supplying and fixing of pre stressed pre cast compound wall including r.c.c. planks of size 2.15mx0.30m (thickness 45 50 mm) including loading, unloading, all taxes and excavation of necessary pit for footing of post with all necessary materials and labours as directed by eic and authority. wall height 0.60 mt 1.00 rmt. 0.00 84.1 wall height 1.25 mt 1.00 rmt. 0.00 84.2 wall height 1.50 mt 1.00 rmt. 0.00 84.3 wall height 2.00 mt 1.00 rmt. 0.00 84.4 wall height 2.15 mt 1.00 rmt. 0.00 85 providing and fixing 2.00 meter high fencing with 2.0 meter long r c c pole 40mm x 40 mm x6 mm and 3 coats white wash fixed at 2.5 mt, c/c. with six horizontal lines and two diagonals of galvanised steel barbed wire weighting 11.26 kg. per 100 meter, strained and fixed to posts with g.i, staples including fixing the postsin ground with 0.5 m x 0.5.m x 0.5 m. block in c.c1:5:10 as per direct by engineer in charge. 1.00 rmt. 0.00 86 providing and laying of chequered tiles over 20mm (average) thick base of cement mortar 1:6 (1 cement : 6 coarse sand) and jointed with grey cement etc. complete. 1.00 sq.mt. 0.00 87 providing and fixing 6mm to 12mm thick panelled ,glazed or panelled and glazed shutters, for doors windows and clearstory windows including anodised aluminium but hinges with necessary screws and indian teak wood shutters with. (a) plywood sheet panels. (up to 10 ton) 1.00 sq.mt. 0.00 88 fixing metallic door handles or knobs for mortice locks with necessary screws etc. complete (door handles /knobs and screws to be paid separately, computer keypad trolly channel, lock, handle, etc. completed, with labour ) 1.00 each 0.00 89 labour work for carting and fixing r.c.c. precast cover ( cover supply by department) at various palace valsad municipality aera for drainage chamber. 1.00 each 0.00 90 painting work of desired theme with oil paint on wall including clearing the surface of all dirt ,dust and other foreign matter. 1.00 sq.mt. 0.00 91 painting work of desired theme with oil paint on trees including clearing the surface of all dirt ,dust and other foreign matter. 1.00 sq.mt. 0.00 92 supplying and fixing of convex glass of dia 500 mm to 750 mm with pole of required height 1.00 nos. 0.00 93 supplying and fixing of circular concrete pot with concrete of nominal mix 1:1.5:3, dia 30cm to 50 cm, height 30cm to 40 cm wall thickness 25mm to 35mm 1.00 each 0.00 94 supplying and fixing of square concrete pot with concrete of nominal mix 1:1.5:3,inner width 35cm to 45cm, height 30cm to 45 cm wall thickness 25mm to 35mm, length 50cm to 75cm ...

Due Date : March 28, 2024

Tender Value : ₹ Ref. Documents

View Tender
19
Indian Army - Gujarat

42896095 bids are invited for white wash white wash , all out machine , all out refill , dettol hand wash 250 ml , phenyl 01 letter , hard broom , dettol liquid 1 letter , sodium hypochloride total quantity : 465...

Due Date : March 23, 2024

Tender Value : ₹ Ref. Documents

View Tender
20
Indian Army - Gujarat

42896080 bids are invited for white wash white wash , geru , asian pant red , asain paint blue , asain paint green , asain paint sky blue , nails 1 inch , white cloth normal , asain paint orange , welding rod , asain paint og total quantity : 704...

Due Date : March 23, 2024

Tender Value : ₹ Ref. Documents

View Tender
22
Road And Building Department - Gujarat

42157145 repairs to viramgam surendranagar muli dolia road km. 125 / 4 7 ( major bridge footpath repairing, white wash, jecketing & grouting work ) ( job no sr / srn / 2023 24 / 2 ) ...

Due Date : February 19, 2024

Tender Value : ₹ 25.15 Lakhs

View Tender
24
Military Engineer Services - Gujarat

41063181 repair and maintenance of bldgs at harni and harni airfield and roof treatment to certain bldgs including false ceiling at afs baroda; 1 demolition of cement concrete ( unreinforced ) in ground floors and pavings n exc 15 cm thickness ( below or above ground level ) complete all as specified and directed. 2 demolition of brickwork or stone / boulder masonry built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings complete all as specified and directed. 3 demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed. 4 dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. 5 dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed. 6 supply only liquid water proofing compound complete all as specified and directed. 7 supply only integral water proofing compound ( powder ) complete all as specified and directed. 8 m&l brickwork with subclass b bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and directed. 9 m&l brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified and directed. 10 cutting chases in brick walls, for concealed water tubing , etc., and making good in cm 1:3, cutting exc 10 cm and n.exc 20cmgirth complete all as specified and directed. 11 m&l 20 mm thick granite ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, win dow cills, cooking platforms and like in cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 12 taking down chowkats or frames with shutter ( without taking off shutter from the frame ) not exc. 1.5 sq. m each and removing to store complete all as specified and directed. 13 taking down chowkats or frames with shutter ( without taking off shutter from the frame ) exc. 1.5 sq. mandn.exc 4.00 sqm each removing to store complete all as specified and directed. 14 resecuring or easing & adjusting without taking down shutters of any description n exc 1 sqm each complete all as specified and directed. 15 resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqmeach complete all as specified and directed. 16 resecuring or easing & adjusting without taking down shutters of any description exc 2 sqmeach complete all as specified and directed. 17 s&f ( in repair ) 100 mm aluminium anodised barrel tower bolts of extruded section including screws complete all as specified and directed. 18 s&f ( in repair ) 150 mm aluminium anodised barrel tower bolts of extruded section including screws complete all as specified and directed. 19 s&f ( in repair ) 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. 20 s&f ( in repair ) steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed. 21 s&f ( in repair ) 75mm size butt hinges stainless steel medium weight complete all as specified and directed. 22 s&f ( in repair ) 100mm size butt hinges stainless steel medium weight complete all as specified and directed. 23 s&f ( in repair ) continuous piano hinges mild steel bright finish or electrogalvanised width of flap 30mm ( when open ) complete all as specified and directed. 24 s&f ( in repair ) 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 25 s&f ( in repair ) 100mm size aluminium handles, cast type, anodized complete all as specified and directed. 26 s&f ( in repair ) 150mm size aluminium handles, cast type, anodized complete all as specified and directed. 27 s&f ( in repair ) mortice lock mild steel vertical type size 100mm 2 levers fixed to wooden or aluminium door shutters complete all as specified and directed. 28 s&f in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finish complete all as specified and directed. 29 s&f ( in repair ) 100mm aluminium anodised hasp and staple, safety type with mild steel hinge pin incl bolts to hinge plate and fixed with screws complete all as specified and directed. 30 s&f ss tubular towel rail 20mm dia 60cm long with brackets complete all as specified and directed. 31 s&f ( in repair ) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length 150mm complete all as specified and directed. 32 s&f ( in repair ) door closer hydraulically regulated, designation no. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. 33 s&f ( in repair ) galvanised iron wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 34 m&l for framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con forming to fe.290.gde e 165 complete all as specified and directed. 35 s&f stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples or aluminium beads complete all as specified and directed. 36 m&l for aluminium frames and shutters powder coated for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 37 s&f pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 38 s&f pre painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in. roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. 39 s&f ( in repair ) 9mm thick plywood, grade bwr, type bb, fixed with screws to timber frame work such as door shutters etc complete all as specified and directed. 40 s&f ( in repair ) 18 / 19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. 41 m&l machine cut kota stone slab flooring 20 25mm thick over and including 20mm cement screed base in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of theslab including rubbing and polishing complete all as specified and directed. 42 m&l plain cement concrete type b 1 1:2:4 ( using 20mm graded crushed stone aggregate ) as in 25mm thick sub base of flooring finished surfaces rough to receive floor finishes, complete all as specified and as directed. 43 material and labourpcc 1: 2 : 4type b 1 ( using 20mm graded crushed stoneagg. ) 40mm thick as in floor finishing surfaces of conc topping even and smooth with using extra cement complete all as specified and as directed. 44 material and labourfor 75 mm thick pcc 1:3:6 type c 2 ( using 40 mm graded stone aggregate ) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in ( 1:3 ) by weight, complete all as specified and directed. 45 m&l for plain cement concrete type b 2 1:2:4 ( using 40mm graded crushed stone aggregate ) as in 75mm thick flooring finished surfaces even and fair without using extra cement, complete all as specified and as directed. 46 m&l for plain cement concrete type c 2 1:3:6 ( using 40mm graded crushed stone aggregate ) as in 75mm thick flooring finished surfaces even and fair without using extra cement, complete all as specified and as directed. 47 m&l for glazed ceramic tiles in vertical surface450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cm 1:4 as backing coat complete all as specified and directed. 48 m&l for non skid ceramic tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in cm 1:6 complete all as specified and directed. 49 m&l for non skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular ) matching area of each tiles exc 0.06 sqm but not exc 0.11 sqm in vertical surface set and jointed in neat cement slurry and pointed in white cement to match as in skirting over and including 10 mm thick rendering in cm 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed. 50 m&l for non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed 15mm thick in cm 1:6, complete all as spd. 51 m&l for non skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular ) area of files exc 0.18 sqm but not exc 0.38 sqm matching shade set and jointed in neat cement slurry and pointed in white cement to match as in skirting over and including 10 mm thick rendering in cm 1:4 as backing coat, even and fair to receive tiles etc complete all as specified and directed. 52 m&l for vitrified ceramic tiles 10 mm thick ( square / rectangular ) polished ( light shade doubly charged ) , area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thcik screed bed in cm 1:6 complete all as specified and directed. 53 m&l for vitrified ceramic tiles 10 mm thick ( square / rectangular ) polished ( light shade doubly charged ) , as in skirting, dado etc with matching to item no 68.00 above set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thcik screed bed in cm 1:6 complete all as specified and directed. 54 dismantling floor, hearth or including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 55 m&l for rendering 10mm thick on fair faces of brick work or concrete sur­faces in cm 1:6, finished even and smooth without using extra cement complete all as specified and directed. 56 m&l for rendering 15mm thick on other than fair faces of brick work or stone surfaces in cm 1:4, finished even and smooth without using extra cement complete all as specified and directed. 57 m&l for rendering 10mm thick on concrete surfaces such as on ceiling finished surfaces even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed. 58 taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 59 m&l for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including a priming coat, complete all as specified and directed 60 m&l for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over and including a priming coat, complete all as specified and directed 61 m&l for preparation of oldplastered surfaces of walls by complete removal of existing treatment incl washing rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed. 62 m&l for preparation of old plastered surfaces of walls and applying one coat of oil bound distempercomplete allspecified and directed. 63 m&l for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including a priming coat, complete all as specified and directed. 64 m&l for preparation of old plastered surfaces of walls and applying one coat of cement base paintcomplete all as specified and directed. 65 m&l for preparation of oldplastered surfaces of wall by complete removal of existing treatment incl washing rubbing down and stopping of painted surfaces and applying two coats of cement base paint over and including one coat of primer complete all as specified and directed. 66 m&l for preparation of old plastered surfaces of ceiling and applying one coat of cement base paintcomplete all as specified and directed. 67 m&l for preparation of newly plastered surfaces of walls and applying three coats of white wash , complete all as specified and directed. 68 m&l for preparation of old plastered surfaces of walls and applying two coats of white washcomplete all as specified anddirected. 69 s&f 4mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in squareexc 0.5 sq. m in each pane complete all as specified and directed. 70 s&f 4mm thick figured glass, pin head type and glazing with oil puttyor wooden beads in squares n exc 0.5 sq. m in each pane complete all as specified and directed. 71 s&f5mm thick tinted glass fixed with and incl necessary rubber gasket and aluminium beading all as directed. note : cost of rubber gasket and aluminium beading are deemed to be included in quoted rates complete all as specified and directed. 72 hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. 73 securing glass of any description in existing wooden frames glazed with putty / beads including removing loose or decayed putty / beads, painting / oiling one coat on rebates, grooves, reputtying and painting / oiling puttied surface to match existing work ( new length of frame reputtied shall be measured ) complete all as specified and directed. 74 description all as per item no 73.00 here in before but securing glass in metal frames complete all as specified and directed. 75 m&l for preparation of old wooden surfaces of any description, not otherwise descri bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 76 m&l for preparation of old steel surfaces of any description, not otherwise descri bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 77 s&f 15mm bore tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 78 s&f 20mm bore tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 79 s&f 25mm bore tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. 80 taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. 81 taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. 82 taking up or down 25mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed. 83 dismantling water tanks and removing to store exc 250 & n exc 500 complete all as specified and directed. 84 dismantling water tanks and removing to store exc 500 & n exc 1000 complete all as specified and directed. 85 dismantling water tanks and removing to store exc 1000 & n exc 2000 complete all as specified and directed. 86 cleaning and removing all scale and dirt, etc, from tanks exc 250 and n.exc 500 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. 87 cleaning and removing all scale and dirt, etc, from tanks exc 500 and n.exc 1000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. 88 cleaning and removing all scale and dirt, etc, from tanks exc 1000 and n.exc 2000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. 89 s&f rotational moulded polye­thylene water storage tanks 500 ltr capacity ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. 90 s&f rotational moulded polye­thylene water storage tanks 1000 ltr capacity ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. 91 s&f rotational moulded polye­thylene water storage tanks 2000 ltr capacity ( cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. 92 s&f in repair pvc water storage tank cover for 500 / 1000 ltr capacity with pvc nut and bolt and fixing arrangement complete all as specified and directed. 93 s&f in repair 15mm dia bib taps fancy type cp, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 94 s&f in repair 15mm dia bib taps cp, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. 95 s&f in repair 15mm dia pillar laps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. 96 s&f in repair 15mm dia brass cp mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. 97 s&f in repair 15mm dia stop valves, cast copper alloy fancy type cp, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 98 s&f in repair 15mm dia stop valves, cast copper alloy fancy type cp with long shank and cup ( concealed type ) , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 99 s&f in repair 15mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 100 s&f in repair 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 101 s&f in repair 25mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 102 s&f in repair 15mm size ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 103 s&f in repair 20mm size ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 104 s&f in repair 25mm size ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. 105 s&f in repair 32mm size waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. 106 s&f in repair 40mm size waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. 107 s&f 75mm bore cast iron soil, waste and vent pipes spun type in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed. 108 s&f 100mm bore cast iron soil, waste and vent pipes spun type in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed. 109 s&f 75mm bore bends ( any radius ) , diminishing pieces or tapers ( larger bore measured ) complete all as specified and directed. 110 s&f 100mm bore bends ( any radius ) , diminishing pieces or tapers ( larger bore measured ) complete all as specified and directed. 111 s&f 75mm bore branch pieces, single ( equal or unequal ) , ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed. 112 s&f 100mm bore branch pieces, single ( equal or unequal ) , ordinary or inverted ( spigot or socket type ) or with parallel branches complete all as specified and directed. 113 s&f in repair stack clamps for 75mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. 114 s&f in repair stack clamps for 100mm dia bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. 115 s&f 75mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid intrenchesorin floors / wall complete all as specified and directed. 116 s&f 110mm bore pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid intrenchesorin floors / wall complete all as specified and directed. 117 s&f 75mm dia pvc ( swr ) bends any radius complete all as specified and directed. 118 s&f 110mm dia pvc ( swr ) bends any radius complete all as specified and directed. 119 s&f 75mm dia pvc ( swr ) branch piece, single ( single y ) equal or unequal complete all as specified and directed. 120 s&f 110mm dia pvc ( swr ) branch piece, single ( single t ) equal or unequal complete all as specified and directed. 121 s&f in repair 75mm dia pvc ( swr ) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. 122 s&f 110mm dia pvc ( swr ) p trap complete all as specified and directed. 123 s&f 110mm dia pvc ( swr ) s trap complete all as specified and directed. 124 s&f in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 125 s&f in repair vitreous china wash down water closet pan ( pedestal pattern ) , white ( including fixing bolts, and flush pipe ) complete all as specified and directed. 126 s&f in repair vitreous china squatting pan, orissa pattern, size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and including flush pipe ) complete all as specified and directed. 127 s&f in repair vitreous china urinal, half stall type, white ( excluding flushing cistern, flush pipe and waste pipe ) complete all as specified and directed. 128 s&f in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white ( minimum ) , with grating and union for discharge pipe ( excluding flushing cistern, flush pipe and waste pipe ) complete all as specified and directed. 129 s&f in repair vitreous cliina wash basin, while, flat back, size 580x450mmexcluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. 130 s&f in repair 10ltr capacity pvc valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. 131 s&f in repair flush pipes to pedestal pan, including all joints complete all as specified and directed. 132 s&f in repair flush pipes to squatt pattern closet including all joints and making good to the floor complete all as specified and directed. 133 s&f in repair 25mm dia stainless steel tubular curtain rod incl fancy type brckets both side fixedcomplete all as specified and directed. 134 s&f in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 135 s&f single mirror bathroom cabinet moulded body and frame ( made of strong and fine quality abs ) with hanged door ( size 16x12 ) white in colour make as approved by ge fixed to wall with appropriate rowl plugs complete all as specified and directed. 136 s&f in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 137 s&f in repair jet spray ss complete set for ewc complete all as specified and directed. 138 s&f plastic seat cover for pedestal pan wc white in colour with flat bottom incl chromium plated hinging divice complete all as specified and directed. 139 s&f in repair plastic seat cover for pedestal pan wc white in colour with flat bottom incl chromium plated hinging divice complete all as specified and directed. 140 s&f in repair stainless steel bright finish round shape 100mm size fixed grating over floor trap in white or gray cement to match with existing floor complete all as specified and directed. 141 description all as per item no 140.00 here in before but 125mm size with access hole for inserting waste pipe etc complete all as specified and directed. 142 s&f in repair shower rose brass chromium plated 125mm size complete all as specified and directed. 143 s&f health faucet ( abs body ) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and abs wall hook incl making connections and fixed in postion complete in all respect asspecified and directed 144 supplying and laying 16mm cpvc pipes sdr 11 & plain cpvc sdr 11 fittings in trenches complete all as specified. 145 supplying and laying 20mm cpvc pipes sdr 11 & plain cpvc sdr 11 fittings in trenches complete all as specified. 146 s&f pvc connections 15mm size with ptmt nuts of length 600mm complete all as specified and directed. 147 s&f pvc waste pipe 32mm size with ptmt nuts of length 600mm for wash hand basin / urinal / sink etc complete all as specified and directed. 148 removingexisting unserviceable water proofing treatmenttaking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises complete all as specified and directed 149 m&l for 15 mm thick screed bed in cm 1:4 mixed with wpc 3% by weight of cement complete all as specified and directed.note: water proofing compound shall be measured and paid separately under respective item of boq. 150 m&l for applying cold bituminous primer @ 0.30 ltr / sqm confirming to is 3384 and laying app polymer modified fiber glass reinforced membrane 3mm thick weight not less than 3.5kg / sqm ( modified bituminous water proofing membrane ) with plain finish with polyester base reinforcement, sealing all over with lap of 100mm in length side and 150mm on width side of membrane by torching the same and including applying a coat of bituminous aluminium paint @ 100 gms / sqm all as per manufacturer instructions complete all as specified and directed . 151 m&l for providing cement concrete type b 0, 1:2:4 using 12.5mm graded aggregate laid to slope 1:30 in padding for wpt over roof slab, filling of pressed steel door frame complete all as specified and directed 152 m&l for providing cement concrete type b 0, 1:2:4 ( using 12.5mm graded aggregate ) in cover fillets at junction of roof slabs and parapet wall, rcc chajja, coping and in similar work complete all as specified and directed 153 disconnecting existing tanks, setting aside ( orlowering if required ) for repairs, cleaning, etc. andhoisting if required reconnecting and re fixing inposition including cleaning and removing all scale and dirt, etc, from tanks exc 250 and n.exc 500 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. 154 disconnecting existing tanks, setting aside ( orlowering if required ) for repairs, cleaning, etc. andhoisting if required reconnecting and re fixing inposition including cleaning and removing all scale and dirt, etc, from tanks exc 500 and n.exc 1000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed. 155 s&f 20 mm dia gi nipple suitable for hdpe water tank complete all as specified and directed. 156 s&f 25 mm dia gi nipple suitable for hdpe water tank complete all as specified and directed. 157 m&l for complete removal of existing treatment by scraping down completely on brick / stone walls / concrete surfacesthoroughly, rubbing down washing with water to the entire satisfaction of engineer in charge and applying one coat of exterior acrylic emulsion paint ( colour or shade as approved by ge ) upto 4th floor including a coat of primer as per manufacturers instruction complete including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premise clean and tidy complete all as specified and directed 158 dismantling boarding, any description, fixed in any position with screws complete all as specified and directed. 159 s&f false ceiling work with galvanised ms ceiling grid system unlock comprising of main runner 34mmx24mmx0.35mmand gi suspender 8 mm dia fixed to ceiling and fixing mineral fibre acoustic ceiling board of size 600mmx600mmx12 mm thick complete all as specified and as per manufacturers instructions including taking down existing ceiling of any description complete all as specified and directed. 160 m&l for sand filling under floor or in foundations including watering and consolidation in layers complete all as specified and directed. 161 m& l for machine pressed precast concrete interlocking paver block any shape and sizeconfirming to is 15658 2006 of 60 mm thickness, m 35 grade with grey cement and pigment complete all as specified and directed....

Due Date : January 08, 2024

Tender Value : ₹ 40 Lakhs

View Tender
25
Military Engineer Services - Gujarat

41011233 tender for painting to runway pavement, earth filling, chequrred painting, etc and certain other misc at af stn bhuj; 1 material & labour for preparation old decorated surfaces of concrete pavement ( both rigid ends of runway ) and applying one coat of white wash complete all as specified and directed by engr in charge. 2 material & labour for preparation of old concrete / bitumen surfaces on rigid / flexible portion of runway / taxi track / dispersal by brushing, washing, rubbing by gunny bags, cleaning with scrappers or scrapping papers, brooming & fanning over 10cm width or girth of any description and applying two coat of acrylic water based road marking paint of any tint or colour ( white / golden yellow etc. ) on lines, dashes arrows, letters etc complete all as specified and directed by engr in charge. 3 all as per item no 2 above but n exc 10 cm width or girth complete all as specified and directed by engr in charge. 4 material & labour for preparation of old concrete / bitumen surfaces on rigid / flexible portion of runway / taxi track by brushing, washing, rubbing by gunny bags, cleaning with scrappers or scrapping papers, brooming & fanning over 10cm width or girth of any description and applying two coat of acrylic water based road marking paint of any tint or colour ( white / golden yellow etc. ) on lines, dashes arrows, letters etc complete all as specified and directed by engr in charge. 5 material & labour for preparation of old concrete / bitumen surfaces on rigid / flexible portion of runway / taxi track by brushing, washing, rubbing by gunny bags, cleaning with scrappers or scrapping papers, brooming & fanning over 10cm width or girth of any description and applying two coat of synthetic enamel paint of any tint or colouras approved by ge for lines, dashes arrows, letters etc complete all as specified and directed by engr in charge. 6 all as per item no 5 above but n exc 10 cm width or girth complete all as specified and directed by engr in charge. 7 material & labour for preparation of old painted surfaces of any description on wall / ac sheet / cgi sheet / steel surfaces exceeding 10 cm in girth or width and applying one coat of synthetic enamel paint of any tint to match with existing surfaces complete all as specified and directed by engr in charge. 8 material & labour for cutting grass manually and removing materials obtained from cutting / cleaning both sides of runway, ptt near dtgm board, links, cleaning of taxi track and other airfield area as per user requirement etc. complete all as specified and directed by engineer in charge.note: contractor will arrange his own minimum 04 nos. of labour form 09:00 am to 05:00 pm ( including lunch break of half an hour at mid day ) every day and as well as reuquired.however department will have the right to stop the work at any time due to security point of view. 9 material & labour for ploughing of soft ground arrester in the pattern prescribed by the engineer in charge using including deploying of tractor with jungle jim / plougher and a driver and cutting of grass around runway and taxi track and removing cutting / cleannng grass and other materials from both sides of runway, ptt near dtgm board, links, cleaning of taxi track and other airfield area as per user requirement etc complete all as specified and as directed byengineer in charge. ( note : payment shall be made for each hour or part thereofof execution of work by the tractor on site.necessary log book duly signed by the users, engineer in charge and contractor shall be maintained and kept on records of the engineer in charge and shall be produced when desired by the ge.stationary for the same shall be supplied by the contractor ) 10 material & labour for grass cutting by mechanical bush cutter around airfield lights, sign boards alongwith drain as per requirement by user including deploying of labour complete all as specified and directed by engineer in charge....

Due Date : January 03, 2024

Tender Value : ₹ 25 Lakhs

View Tender
26
Military Engineer Services - Gujarat

40950363 tender for provision of certain cap / mr / mw works under age br ( i ) ( ii ) and age ( e / m ) at af station bhuj; 1 demolitionof unreinforced cement concrete of any description and any position not otherwise specifically provided for complete all as specified and directed by engineer in charge. 2 dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified and directed by engineer in charge. 3 excavating over area n. exc. 1.5m deep and getting out in hard / dense soil complete all as specified and directed by engineer in charge. 4 material & labour for plain cement concrete, type d2, ( 1:4:8 ) , ( using 40mm graded stone aggregate ) in foundationand filling mass concrete complete all as specified and as directed byengineer in charge. 5 formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams;and similar work; vertical or to batter complete all as specified and directed by engineer in charge. 6 formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better etc complete all as specified and directed by engineer in charge. 7 formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick ( horizontal or sloping ) complete all as specified and directed by engineer in charge. 8 material & labour for m 30 reinforment cement concre foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed by engineer in charge. 9 material & labour for rcc m 30 ( design mix ) in walls, retaining walls, basement walls, ballast wall and the like any thickness, above top of footings including attached plasters and buttresses etc complete all as specified and directed by engineer in charge. 10 material & labour for m 30 reinforment cement concre slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by engineer in charge. 11 material & labour for tmt bars 10mm dia and over, cut to length, bent to shape required, including crancking, bending spiraly for column & hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia complete all as specified and directed by engineer in charge. 12 returning filling in soil and including spreading leveling watering and well ramming in layers n.exc. 25 cm thick complete all as specified and directed by engineer in charge. 13 removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by engineer in charge. 14 material & labour for precast cement concrete block masonry with solid blocks exc 10cm in width type c1 ( 1:3:6 ) ( using 20mm graded stone aggregates ) and setting in cement mortar 1:6complete all as specified and as directed byengineer in charge. 15 material & labour for 10 mm thick rendering for fair faces of concrete surfaces on walls in cm 1:6 and finished even and smooth without using extra cement complete all as specified and directed by engineer in charge. 16 material & labour for preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by engineer in charge. 17 demolition of brick work or stone / boulder / block masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by engineer in charge. 18 material & labour for cement concrete type b 1, 1:2:4 ( using 20mm graded aggregate ) as in bed blocks for fixing of hold fasts including rendering 15 mm thick with cm 1:6etc complete all as specified and directed by engineer in charge. 19 material & labour for rendering 15mm thick in cm ( 1:4 ) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed by engineer in charge. 20 supply & fix framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete all as specified and directed by engineer in charge. 21 supply & fix collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed by engr in charge. 22 material & labour for preparing new or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer on steel surfaces complete all as specified and directed by engineer in charge. 23 cutting upto a depth of 2.5 cm into concrete walls and trimming surfaces as required girth exc 30 cm complete all as specified and directed by engr in charge. 24 material & labour for sub main wiring with two runs ( two runs measured as one run ) of pvc insulated and unsheathed frlsh cable 650 / 1100 volts grade, conforming to is 1536 1977 multi stranded 4 sqmm single core, copper conductor drawn through and including pvc casing capingisi marked with accessories to wall / ceiling with proper saddles and 4 sqmm single core multistranded copper conductor frlsh pvc insulated and unsheathed cable 1100 volts grade, isi marked as earth continuity wire complete all as specified and directed by engr in charge. ( note: two runs of conductor with one run of earth wire and one run of conduit will be measured & paid as one unit ) 25 supply & fix switch socket combination 2 in 1, 6 / 16a flush type 2 modular isi marked complete all as specified and directed by engineer in charge. 26 supply & fix pvc rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed by engineer in charge. 27 supply & fix double door sheet metal enclosures factory made dbsprotection class ip 43, suitable for fixing of mcbs, isolators etc, confirming to is 13032 single pole and neutral 4 ways with 200 amp rated bus bar 240 volts powder coated complete all as specified and directed by engr in charge. 28 supply & fix isolators / mcbs, etc. in distribution board of the following rating and capacities complete all as specified and directed by engineer in charge. 29 mcb spn of 240 volts 20 / 32 / 40 amps capacity, c series, 10 ka 30 mcb sp of 240 volts 6 40 amps capacity, c series, 10 ka 31 mcb tpn of 415 volts 63 amps capacity, c series, 10 ka 32 material & labour for 25 mm thick cement concrete type b 0, 1:2:4using 12.5mm graded aggregate insub base of floors etc complete all as specified and directed by engineer in charge. 33 material & labour for vitrified ceramic light shade 10 mm thick ( sqaure / rectangular ) area of each tiles n.exc. 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete all as specified and directed by engineer in charge. 34 all as per item no 30 but in vertical surfaces such as dado, skirting and riser including rendering 10 mm thick in cm 1:4 complete all as specified and directed by engineer in charge. 35 complete removal of existing treatment on wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed by engineer in charge. 36 material & labour for preparing new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of chalk whitening complete all as specified and directed by engineer in charge. 37 material & labour for rendering 15mm thick in cement mortar 1:4 ( external ) on brick walls or on concrete surfaces in two coats, 1st coat of 10mm thick and 2nd coat of 5mm thick including mixing with wpc to 2nd coat as per manufacturers instructions, plastered surfaces finished even and smooth without using extra cement, complete all as specified and directed by engineer in charge.note : integral water proofing compound shall be measured and paid separately as ‘supply only’ under relevant items. 38 material & labour for preparing new surfaces of walls and applying two coats of cement base paint over one coat of priming plastered and other surfaces with alkaliresistand priming paintcomplete all as specified and directed by engineer in charge. 39 taking down chowkats or frames with shutters ( without taking off shutters from the frames ) exc. 1.5 sqm but not exc. 4.00 sqmeach complete all as specified and directed by engineer in charge. 40 refixing in the same opening of chowkhat or frames with shutters ( without taking off shutters from the frames ) exc. 1.5 sqm but not exc. 4.00 sqm eachcomplete all as specified and directed by engineer in charge. 41 taking down cement plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries / rubbish etc complete all as specified and directed by engineer in charge. 42 material & labour for 20mm thick granite work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like including 20mm thick screed bed of cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by engineer in charge. note : cost of screed bed shall deemed to be included in quoted unit rate . 43 supply and install hi wall split units indoor / outdoor of air conditioner complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and eer 3.2.of capacity 1.0 ton complete all as specified and directed by engineer in charge. 44 supply & fix voltage stabilizer electronic wall mounting type suitable for ac upto 1.0 tr for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 v to 250 v with output voltage stablized at 230 v with accurancy of + 2.5% and of capacity 3.0 kva complete all as specified and directed by engr in charge. 45 supply & fix in replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete 240 volt with one single pole mcb of 20 amps complete all as specified and directed by engr in charge. 46 supply & fix mcb spn in distribution board of the rating of 5 to 32 amps capacity, c series, 10 ka complete all as specified and directed by engr in charge. 47 excavating in post holes ( or similar holes ) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard / denses soil complete all as specified and directed by engr in charge. 48 material & labour for pcc1:2:4, b2 ( using 40mm graded stone aggregate ) infoundations filling and mass concrete complete all as specified and directed by engineer in charge. 49 supply & fix roof trusses ( framed ) , trussed, posts, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel, retangular / square tubes or flat sections ) including distance pieces, cleats etc fe 410 w ( gde / e 250 ) quality a complete all as specified and as directed byengineer in charge. 50 dismantling frames trusses not exc 10 m length complete all as specified and directed by engr in charge. 51 dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings etccomplete all as specified and directed by engr in charge. 52 supply & fix pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. 53 fixing only pre painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by engineer in charge. 54 supply & fix mild steel for wind ties of size 25mm x 5mm for roof including securing bolts , incuding cutting tops to shape as directed , drilling holes and similar works conforming to fe 290 gde e 165 complete all as specified and directed by engineer in charge. 55 material & labour for preparing old or previously untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces complete all as specified and directed by engineer in charge. 56 supply & fix ms bed plate any thickness with sleeve pieces riveted or welded complete all as specified and directed by engineer in charge. 57 erection and fixing only steel work in tubular trusses including special shaped washer etc. complete using erw or induction butt welded tubes conforming to i. s.1161 1979 grade st. 240 complete all as specified and directed by engineer in charge. 58 supply & fix in repairs mild steel screw bolts 5 to 10 mm dia of neck ( machine made ) with hexagonal or square heads at one end and screwed theother, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm longcomplete all as specified and directed by engineer in charge. 59 welded steel wire fabric not exc. 4.00 kg supplied & fixed complete to wood of steel members complete all as specified and directed by engineer in charge. 60 excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in soft / loosesoil soil complete all as specified and directed by engineer in charge. 61 supply & fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets ( for securing wire mesh etc. ) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe 290 gde e 165 complete all as specified and directed by engineer in charge. 62 supplied & fixed mild steel round bars 10 mm dia and over as in strengthening bars for chain link fencing conforming to fe 290 gde e 165complete all as specified and directed by engineer in charge. 63 supply only chain link ms galvanised fencing of 3.15 mm dia of wire and 40 mmx40mm mesh size ( pitch of wires ) conforming to is 2721:2003 including line wires of 4 mm dia straining bolts, etc including provision of binding wire complete all as specified and directed by engineer in charge. 64 fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc ncluding provision of binding wire complete all as specified and directed by engineer in charge 65 supply & fix in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed ( each line wire to be measured ) incl dismantling of old fencing complete all as specified and directed by engineer in charge. 66 material & labour for m 30 reinforment cement concre for columns, pillars, piers, posts and struts complete all as specified and directed by engineer in charge. 67 removing excavated materials at a distance exc. 500 m but n.exc. 1.50 mtr and depositing / spreading and leveling where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by engineer in charge. 68 formwork to sides of pillars, posts, struts, piers, columns and stanchions of retangula / square for rough finished surfaces of concrete etc complete all as specified and directed by engineer in charge. 69 material & labour for mild steel tmt bars 5mm dia, cut to length, bent to shape required, including cranking, stirrups spaces and bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clipsetc complete all as specified and directed by engineer in charge. 70 material & labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; hung as gates, including pintle hinges, stops, hand made sliding bolts, etccomplete all as specified and directed by engineer in charge. 71 material & labour for framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; hung as gates, including pintle hinges, stops, hand made sliding bolts, etccomplete all as specified and directed by engineer in charge. 72 material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in cm 1:3 for fair finished surfaces even and smooth without using extra cement complete all as specified and directed by engineer in charge. 73 supply & fix ms framed work by fabrication such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work of water tanks etcincluding portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to fe.290.gde e 165complete all as specified and directed by engineer in charge. 74 supply & fix ms purpose made butt hinges conforming to fe 290 gde e 165 suitable for fixing to stone / concrete door and window frames including fabrication work etccomplete all as specified and directed by engineer in charge. 75 supply , laying and testing cable xlpe insulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric power cable ( heavy duty ) 1100 volts grade with stranded aluminium conductor complete all as specified and directed by engineer in charge for the following size of size: 76 120 sqmm 3.5 core 77 50 sqmm 3.5 core 78 10 sqmm 2 core 79 excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc 1.5m in depth and getting out in hard / dense soil soil complete all as specified and directed by engineer in charge. 80 material & labour for sand cushioning for ug cables using dry river sand; gently punning down complete all as specified and directed by engineer in charge. ( note : for measurement purpose punned thickness shall be considered ) 81 supplying and laying un reinforced precast concrete cable cover class lv, type 2, flat, size 300x 180 x 40 mm complete all as specified and directed by engineer in charge. 82 material & labour for straight through joint ( epoxy ) for lt 1100 volts grade, aluminium conductor jointing kits, aluminium ferrules and labour complete for making joints and testing complete for cable size 70 to 120 sqmm, 4 corecomplete all as specified and directed by engineer in charge. 83 material & labour for cutting of existing road for laying gi pipe of size 50 mm including pcc work after laying the cable in gi pipe complete all as specified and directed by engineer in charge. 84 supply & fix tubes light grade of 80 mm bore galvanised with all fitting for cable protection trenches / wall / on pole including necesarry clamps sets and nut & bolts etc complete all as specified and directed by engineer in charge. 85 material & labour for wall mounted fan 400 mm sweep, 240 volts osillation type sturdy & heavy dutypvc blades for higher air dilivery, nickel chrom plated guard, smooth oscillation complete in exisiting wall etc complete all as specified and directed by engineer in charge. 86 material & labour for point wiring complete with 1.5 sqmm single core multistranded copper conductor pvc insulated and unsheathed frlsh cable 1100 volts grade isi marked drawn through and including pvc casing & capping including accessories etc including fixed to wall / ceiling including provn of 1.5 sqmm single core multistranded copper conductor frlsh pvcinsulated and unsheathed as earth wire continuity with and pressed steel terminal box powder coated of suitable size 3mm thick bakelite white / colour sheet top cover isi marked with brass screws and cup washers for housing switches, sockets, fan regulator, one fan / exhaust point controlled by one, one way switch single pole etc complete all as specified and directed by engineer in charge. 87 material & labour for modular switch 1 way 6a 1 modulecomplete all as specified and directed by engineer in charge. 88 supply & fix modular socket 6a 5 pin 2 in 1 combined 2 module 240 volts complete all as specified and directed by engineer in charge. 89 supply & fix modular white cover plate with frame of 3 moduler isi marked complete all as specified and directed by engineer in charge. 90 supply & fix modular surface mounting plastic box of 3 moduler isi marked complete all as specified and directed by engineer in charge. 91 supply & fix steel work in tubular trusses including special shaped washer etc. complete using erw or induction butt welded tubes conforming to i. s.1161 1979 grade st. 240 complete all as specified and directed by engineer in charge. 92 supply & fix plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment complete all as specified and directed by engineer in charge. 93 surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in hard / dence soil complete all as specified and directed by engineer in charge 94 rolling and consolidation formation surfaces in cutting using power roller exc 8 tonne but n exc 12 tonne complete all as specified and directed by engineer in charge. 95 material & labour for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed by engineer in charge. 96 material & labour for 100 mm thick cement concrete type c2, 1:3:6using 40mm graded stone aggregate insub base of floors etc complete all as specified and directed by engineer in charge. 97 material & labour for 100 mm thick cement concrete type b1, 1:2:4using 20mm graded stone aggregate as in floors etc complete all as specified and directed by engineer in charge. 98 forming contraction ( dummy ) joints 65mm deep x 10mm wide, filled with sealing compound grade b complete all as specified and directed by engineer in charge. 99 material & labour for point wiring complete with 1.5 sqmm ( nomonal area ) pvc insulated pvc unsheathed multistranded copper conductor single core cable 1100 volts grade frlsh isi marked drawn through and including heavy duty non metalic pvc conduit isi marked not less than 20 mm dia of thickness 1.8 mm concealed in wall roof etc with all connected fittings including pressed steel terminal boxes suitable for mounting modular switches sockets etc and including pvc insulated and unsheathed multistranded single core copper conductor cable of size 1.5 sqmm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittingscomplete all as specified and directed by engineer in charge for: . 100 one light point controlled by one, one way switch single pole. 101 one exhaust fan point controlled by one, one way switch single pole. 102 one 3 pin 5 amps socket out let on independent board. 103 all as per item no.93 here in before but with 2.5 sqmm copper conductor cable for one 3 pin, 15 amps socket out let on independent board complete all as specified and directed by engineer in charge. . 104 supply & fix in replacement of ceiling rose 3 phase, pvc / polycarbonate body complete all as specified and directed by engr in charge. 105 supply & fix modular plastic surface box of module 1 / 2 flush isi marked complete all as specified and directed by engineer in charge. 106 supply & fix modular plastic surface box of module 3 flush isi marked complete all as specified and directed by engineer in charge. 107 supply & fixingin repairs wall mounted decorative ultra slimled lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 w 4 ft indoor decorative with 2 core copper wire from ceiling rose to light fitting complete all as specified and directed by engr in charge 108 supply & fix modular white cover plate with frame of module 1 flush isi markedcomplete all as specified and as directed byengineer in charge. 109 supply & fix modular white cover plate with frame of module 3 flush isi markedcomplete all as specified and as directed byengineer in charge. 110 supply & fix modular blank plate module 1 complete all as specified and as directed byengineer in charge. 111 supply & fix modular switch flush type, 6 amp. sp, one way , 1 module complete all as specified and as directed byengineer in charge. 112 supply & fix modular socket outlet, 3 pin, 6 amp, flush type 2 module complete all as specified and as directed byengineer in charge. 113 supply & fix modular switch 16 amp, flush type 1 module complete all as specified and as directed byengineer in charge 114 supply & fix modularsocket outlet, 3 pin, 6 / 16 amp flush type 2 module complete all as specified and as directed byengineer in charge. 115 material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4.0mmdia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to earthing test point all as specified or indicated including testing on completion provn of gi protectionpipe light grade of 32mm bore upto 7.5m length and connected earth wire to earthing test point all as shown in electrical plate no. 3 of ssr part i 2009 and as specified or indicatedand testing on completion including necessary excavation & earthwork in any type of soil, pcc ( 1:3:6 ) type c1 chamber, precast slab 50mm thick in cement concrete ( 1:2:4 ) type b1 ( rein forced with welded steel wire fabric ( xpm ) of weight not less than 4kg / sqm ) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc complete all as specified and as directed byengineer in charge. 116 supply & fix distribution board ( db ) double door type made out of sheet metal enclosures ( crca ) dust and vermin proof db tpn 4 way with 200 amps rated copper bus bar 415 volts with in built mccb 63 amps 16 ka 1 no each bar ip 43 protection fix flush to wall complete all as specified and directed by engr in charge. 117 supply & fix switch piano flush type, 230 / 250 volts 5 amp. sp, one way complete all as specified and directed by engr in charge. 118 supply & fixswitch socket combination 2 in 1, 5 / 15a amp flush type isi marked complete all as specified and directed by engr in charge. 119 supply & fix exhaust fan, steel body ac single phase 230v of size 300 mm sweep with blades and frame and louvers complete all as specified and directed by engr in charge 120 supply & fixing led light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed byengineer in charge. 121 supply & fixing led lights fitting 1x 20w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed byengineer in charge. 122 supply & fix energy saving evironmental friendly long life corrosion resistent impact proof surface mounted luminaire with pc housing & opel finish cover suitable for wet location with led 25 w light source including material and labour 32 mm dia light grade gi pipe bracket with ms clamps complete with nuts and bolts and washers complete all as specified and as directed byengineer in charge 123 supply & fixing amp rating 240v, 10ka c curve miniature circuit breaker ( mcb ) of following poles and current carrying capacity in the mcb db complete with connection testing and commissioningcomplete all as specified and directed by engineer in charge for: . 124 mcb sp 5 to 40 amps 125 mcb spn 32 amps 126 supply & fixing including testing of storage type water heater / geyser of vertical type of capacity 25 ltr, rated 2000w, 230v ac, 50hz auto cutoff with a high tech adjustable thermostat, multifuction saftey valve, powder coated metal body glass lined enamel coated tank material advanced puf insulation magnesium anode coated heating element, red and green indicator lamp, suitable for highrise building suitable for water pressure head upto 8 bars , star rating ( bee ) 5 star high density & thick puf that ensures energy efficiency and reduced electricity bills 15 amps heavy duty plug complete all as specified and directed by engineer in charge 127 supply & fixing cpvc pipes 20mm dia sdr 11 & plain cpvc sdr 11 with all fittings on wall / ceiling complete all as specified and directed by engineer in charge 128 supply & fixing geyser pvc connection 15mm size with ptmt nuts of length 450mm long complete all as specified and directed by engineer in charge 129 supply & fix bib taps, cast copper alloy fancy typechromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size15mm bore complete all as specified and directed by engineer in charge. 130 supply & fix stop valve 15mm dia cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by engineer in charge. 131 material & labour for 25 mm bore galvanised steel tubing medium grade isi marked with all fitting and fixed complete to walls and ceiling or laid in floor / trenches and under road complete all as specified and directed by engineer in charge 132 material & labour for cutting existing steel tubing for alterations or additions of size mm bore complete all as specified and directed by engineer in charge 133 supply & fix gun metal globe / forged valve withiron wheel head screwed both ends for joining iron pipe non rising forged brass spindle class 1 is 778 marked of 25 mm size complete all as specified and directed by engineer in charge. 134 supply & fix 25 mm bore galvanised iron tubes light grade for cable protection complete all as specified and directed by engineer in charge 135 supplying and laying un reinforced precast concrete cable cover class lv, type 1, flat, size 250x 180 x 40 mm complete all as specified and directed by engineer in charge. 136 earth work in excavation by mechanical means ( hydraulic excavator ) means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) n exc 1.5 m deep including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed by engineer in charge. 137 earth work in excavation by mechanical means ( hydraulic excavator ) means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) exc 1.5 m but n exc 3.00 deep including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed by engineer in charge. 138 formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by engineer in charge. 139 material & labour for m 30 reinforment cement concrete beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by engineer in charge. 140 material & labour for m 30 design mix reinforment cement concrete as in chajja complete all as specified and directed by engineer in charge. 141 material & labour for 40 mm thick cement concrete type b 0, 1:2:4 mix ( using 12.5 mm graded stone aggregates ) as in dpc or copings to horizontal or vertical surfacesincludingnecessary use and waste of form work complete all as specified and directed by engineer in charge. 142 material & labour for pcc 1:3:6 type c 0 ( using 12.5 mm graded stone aggregate ) as in roof padding complete all as specified and directed by engineer in charge. 143 material & labour for rendering 10mm thick over rcc roof mixed , in cement mortar 1:3 mixed with integral water proofing compound at the rate of minimum @ 3% by weight of cement and as per manufacturers instructions, finished even and smooth without using extra cement complete all as specified and directed by engineer in charged. ( supply only water proofing compound shall be measured and paid for separately ) 144 priming surfaces and applying normal treatment ( for moderate conditions ) using glass fibre base bitumen felt, grade 2 complete all as specified and directed by engineer in charge. 145 app based polymeric membrane minimum weighing 3kg / sqm and minimum 3mm thick reinforced with polyster non wove fabric ( wt. not less than 150 gms / sqm ) land on primed surface by forced application complete all as specified and directed by engineer in charge. 146 material & labour for cement concrete 1:3:6 ( using 40mm stone graded aggregate ) , 75mm thick as in plinth protection, etc., laid in alternate bays, finishing concrete surfaces even and smooth without using extra cement, complete all as specified and directed by engineer in charge. 147 material & labour for rendering 15mm thick in two layers first coat 10mm thick in cm 1:6 and second coat 5mmthickin cm 1:4 with wate proofing compound @3% by wt of cement on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed by engineer in charge. note : wpc will be measured and paid separately. 148 supply only water proofing compound complete all as specified and directed by engineer in charge. 149 material & labour for preparation of new surfaces of wall and applying two coats of exterior emulsion paint camoflage pattern paint over a coat of wall primer complete all as specified and directed by engineer in charge 150 material & labour for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by engineer in charge. 151 supply & fix anodised aluminium frame powder coated for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by engineer in charge. 152 supply & fix anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long ( 1 no. ) . hinges type b 21 100mm long ( 2 no. ) suitable handle ( 1 no. ) complete all as specified and directed by engineer in charge. 153 supply & fix sheet glass 4mm thick, ordinary quality and glazing with putty in squares nexc 0.5 sq. m in each pane complete all as specified and directed by engineer in charge. 154 material & labour for treating the backfill in contact withfoundation @ of 7.5 litres ofemulsion per square metre of vertical surface layer of the sub structure in contract with back fill to be measured complete all as specified and directed by engineer in charge. 155 material & labour for treating the top surface of filled earth @ 5 litres chlorophyrophase of emulsion per square metre of surface complete all as specified and directed by engineer in charge. 156 material & labour for treating the soil under plinth protection @ 5 litreof emulsion per square metre of surface area complete all as specified and directed by engineer in charge. 157 supply & fix solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s. square tube, suppling & fixing in opening complete all as specified and directed by engineer in charge. 158 supply & fix factory made solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails. m.s. frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, suppling & fixing in the frame, complete all as specified and directed by engineer in charge. 159 supply & fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by engineer in charge. 160 supply & fix aluminium anodised, barrel tower bolts of extruded section length of bolt 150 mm complete all as specified and directed by engineer in charge. 161 supply & fix aluminium handle cast type anodized 150 mm complete all as specified and directed by engineer in charge 162 supply & fix ms butt hinge medium weight cold rolled 100 mm size complete all as specified and directed by engineer in charge. 163 supply & fix vitreous china wash down water closet pan ( pedestal pattern ) , white ( excluding fixing bolts, flushing cistern and flush pipe ) complete all as specified and directed by engineer in charge. 164 supply & fix 10 litres, cast iron, valveless. syphonic action type, flushing cistern, high level with inlet, ball valve, float, chain and pull, and bracketscomplete all as specified and directed by engineer in charge. 165 supply & fix seat and cover for pedestal pan complete all as specified and directed by engineer in charge. 166 supply & fix flush pipes to pedestal pan including all joints complete all as specified and directed by engineer in charge. 167 supply & fixing 1000 litre capacity rotational moulded polythelene water storage tank isi marked, cylindrical vertical with closed top hoisted and fixed in position all specified in ssr part i orcomplete all as specified and directed by engineer in charge. 168 material & labour for 20 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed by engineer in charge. 169 material & labour for non skid ceramic tiles 7 to 8mm thick ( sqaure / rectangular ) area of each tiles exc. 0.06 sqm but n.exc. 0.11sqm as per is 13755 in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by engineer in charge 170 material & labour for 10 mm thick screed bed in cement mortar 1:4 to receive tiles etc on vertical surface of walls complete all as specified and directed by engineer in charge. 171 material & labour for glazed tiles 200mmx300mmx7mm thick in as in skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles complete all as specified and directed by engineer in charge. 172 supply & fixing pvc connection 15mm size with ptmt nuts of length 600mm long complete all as specified and directed by engineer in charge 173 supply & fix brass chromium plated tubular towel rail 20 mm dia d type 60 cm long between flanges complete all as specified and directed by engineer in charge. 174 material & labour for 15 mm bore galvanised steel tubing medium grade isi marked with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by engineer in charge 175 material & labour for 20 mm bore galvanised steel tubing medium grade isi marked with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by engineer in charge 176 supply & fix stop valves, 20 mm ( isi marked ) cast copper alloy, screwed down, high pressure, with but but fancy type, chromium plated with long shank and cup ( concealed type ) complete all as specified and directed by engineer in charge. 177 supply & fix ball brass valves, high pressure, with polyethylene float and flynutcomplete, screwed for iron pipe or brass ferrule and fixed bore of pipe 20 mm size complete all as specified and directed by engineer in charge. 178 supply & fix bevelled edge mirror of size 600mm x 450mm selected quality glass mounted on6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed by engineer in charge. 179 material & labour for pvc ( swr ) gully trap 125 / 110mm, settingand jointing with solvent cement complete all as specified and directed by engineer in charge 180 supply & fix vitreous china wash basin, white flat back, size 550x400mm , excluding taps, waste, chain and plug and porcelain stopper including brackets complete all as specified and directed by engineer in charge. 181 material & labour for32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed by engineer in charge. 182 supply & fix pillar taps of 15 mm bore, fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed by engineer in charge. 183 material & labour for cast iron nahani trap, of 75 mm grating including jointing to waste pipe fixed in cement concrete type b 1 ( 1:2:4 ) complete all as specified and directed by engineer in charge. 184 supply & fix 100 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by engineer in charge. 185 supply & fix soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed by engineer in charge. 186 supply & fix vitreous china urinals, bowl flat back size 465x355x265 mm ( white ) with grating and unin for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;complete all as specified and directed by engineer in charge. 187 supply & fix angle stop valve of ptmt any colour high pressure screwed for iron pipe and fixed, ( minimum weight 15mm 90gms ) complete all as specified and directed by engineer in charge 188 material & labour for 50 mm thick cement concrete type b 1, 1:2:4 mix ( using 20 mm graded stone aggregates ) as in copings includingnecessary use and waste of form work complete all as specified and directed by engineer in charge. 189 material & labour for providing precast reinforced cement concrete type b 1, 1:2:4 ( using 20mm graded stone aggregate ) as in cover slabs for man holes and set in cement mortar ( 1:4 ) including necessary form workcomplete all as specified and directed by engineer in charge.note: reinforcement steel shall be measured and paid separately 190 material & labour forproviding cement concrete 1:3:6type c 2 ( using 40mm graded stone aggregate ) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for size 200 mm bore of pipe complete all as specified and directed by engineer in charge. 191 material & labour for sail glazed stone ware drain pipes grade a isi marked laid to slope in trenches and jointed in cm ( 1:2 ) and tested complete size 200 mm bore complete all as specified and directed by engineer in charge. 192 material & labour for plain cement concrete, type b2, ( 1:2:4 ) , ( using 40mm graded stone aggregate ) in foundationand filling mass concrete complete all as specified and as directed byengineer in charge....

Due Date : December 23, 2023

Tender Value : ₹ 25.10 Lakhs

View Tender
27
Military Engineer Services - Gujarat

40929805 tender for repairs to leveling and sand filling pbt and lbt at sarmat range under ge ( af ) jamnagar no.2; 1 m&l for approved earth filling by spreading levelling to make the required level etc. in lbt ( live bombing target ) range including filling of craters complete all as specified and directed.note: ( i ) soil required for filling shall be brought out from outside md land under his own arrangement of contractor. ( ii ) soil shall be free from pebbles, stones, bushes, shrubs and other vegetation, black cotton soil. ( iii ) measurement for filling in crater shall be carried by stack measurement of the soil brought by the contractor. ( iv ) measurement shall be carried out for net finished volume of earth filled subject to 20% deduction due to bulkage. 2 surface excavation in soft / loose soil n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed. 3 removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. 4 m & l for preparing surface of earth filled gunny bags and earth filled bitumen barrel planted on ground ( exposed surface only ) removing and cleaning ( measured flat ) caked mud and applying one coat of white wash complete all as specified and directed. 5 removing old worn out ( unserviceable ) hdpe bags / gunny bags from stacks filled with sand etc and supply & placing in position new hdpe bags / gunny bags inner laminated layer standard quality, wt. of bag shall not be less than 90 grams per bag and filled with locally available sand / soil ( approx. qty 1.20 cuft in each bags ) including tying properly & stacking neatly, placing the bag at different heights for making pyramid tor pin and applying three coats of white wash on external surface of gunny bags etc complete all as specified and directed. 6 removing of existing damaged bitumen barrel targets planted on ground complete all as specified and directed. 7 supply and erecting in position as target old mild steel barrel ( old bitumen container barrel ) of the size 1.00 meter height and 0.50 meter dia in cylindrical shapes including earth filling inside the barrel up to the rim, including ramming and consolidating soil inside the barrel and applying three coats of white wash on external surfaces of barrels complete all as specified and directed. 8 cross ploughing in any type of soil with disc plough mechanically operated with average depth of 25 cm running the plough in long and traverse direction and cleaning away of all grass / vegetable spoils shrubs under growth roots and removing rubbish including hard objects etc from the surfaces complete all as specified and directed. 9 deployment of mechanical earth mover / excavator ( jcb or hitachi ) incl operator and fuel oil & lubricant etc for levelling of earth around lbt / pbt with loose soil deposited nearby area complete all as specified and directed.note : ( a ) mechanical earth mover / excavator shall be capacity 7.5 ton as specified below: ( i ) bucket capacity 1.1 m3 ( ii ) backhoe load height not less than 3400mm. ( iii ) backhoe dig depth not less than 4450mm. ( iv ) loader clearance at max dump height 2690mm. ( v ) loader dig depth not less than 200 mm ( b ) payment shalll be made for time entry at sarmat range to time exit from sarmat range. ( c ) contractor shall maintain log book containing detail of date / time & location of operation of machine and same shall be signed by engr in charge & contractor. 10 cutting bushes, shrubs and other vegetation from target / alignment area upto ground level incl removing to a distance not exc 50m complete all as specified and directed. 11 m&l for preparation of old painted surfaces of bricks, stones, concrete, ac sheets of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. 12 taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 13 m&l for rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed. 14 demolition of brick / stone masonry / block masonry work built in cement mortar or cement lime mortar complete & removal of debris to a distance exc 1.5 km but n.exc 5 km, complete all as specified and directed. 15 m&l for preparation of new plastered surfaces of walls incl plaster / cornices etc and applying two coats of weather proof acrylic based emulsion paint of any tint as approved over one coat of primer applied as per manufactureres instruction complete all as specified and directed. 16 m & l for brick work with subclass ‘b’ bricks, straight or curved on plan exc 6m mean radius, and setting in cement mortar ( 1:6 ) , complete all as specified and directed. 17 m&l for preparation of old decorated surfaces of walls ( plastered / unplastered ) by brooming down and applying two coats of white wash incl cornices complete all as specified and directed. 18 m&l for preparation of old painted steel surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed....

Due Date : December 18, 2023

Tender Value : ₹ 45 Lakhs

View Tender
28
Military Engineer Services - Gujarat

40877022 tender for welcome maintenance of omqs in domestic area at af stn naliya.; 1 m&l for preparation of old plastered / unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed. 2 m&l for preparation of old surface of ceiling of any description and applying one coat of white wash complete all as specified and directed. 3 m&l forpreparation of old woodensurfaces of any description not otherwise described exceeding 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. 4 m&l for preparation of old steel surfaces of any description not other wise described exceeding 10 cm width or girth and applying onecoat of synthetic enamel paint complete all as specified and directed. 5 m&l for preparation of old surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed. 6 m&l for 3mm thick wall care putty in two coats of 1.5mm thick each layer on wall and sand papering to obtain a smooth surface complete all as specified and directed. 7 m&l for 3mm thick wall care putty on ceiling in two coats of 1.5mm thick each layer on wall and sand papering to obtain a smooth surface complete all as specified and directed. 8 m&l for cutting and widening existing cracks not exc 10mm in depth in v shape in wall and then filling in cm ( 1:3 ) including making good to facings complete all as specified and directed. 9 m&l for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of with alkali resistant priming paint over 3mm thick layer of wall putty in two coats of 1.5mm thick each layer on wall and sand papering to obtain a smooth surface complete all as specified and directed 10 taking down of cement plaster fromsurfaces of wallof any description including raking out joints, hacking out for key, scrubbing down with water etc including complete treatment if any all as specified. 11 m&l for rendering 15mm thick in two coat ( 10+5mm ) cement plaster on concrete surfaces in cm 1:6 in base coatand2nd coat 5mm thick in cm 1:4 using liquidwater proofing compound ( 2% by weight ) finished the surface even and smooth without using extra cement complete all as directed.note : wpc shall be measured and paid separatly under relevant item of boq as supply only. 12 m&l for rendering 10mm thickcement plaster on concrete surfaces of walls in cm 1:6, finished the surface even and smooth wihout using extra cement etc complete all as specified and directed. 13 m&l for rendering 5 mm thickcement plaster on concrete surfaces of ceiling in cm 1:3, finish the surface even and smooth without using extra cement etc complete all as specified and directed. 14 m&l for preparation of new plasteredsurfaces of walls, and applying two coat of oil bound distemperover a coat of primer complete all as specified and directed. 15 m&l for preparation and applying two coats of 100% premium acrylic emulsion paint having voc less than 50gm / ltr and uv resistance as per is 15489 2004, alkali and fungal resistance, dirt resistance exterior paint of required shadewith silicon additives @1.43 lit / 10sqm over and including priming applied @ 0.90 litre / 10 sqm over new plastered surfaces all as specified and directed 16 m&l for preparation ofnewplasteredof ceiling and applying three coats of white wash complete all as speified and as directed. 17 m&l in repairs for 9mm thick commercial plywood, grade bwr, type bb, fixed with nails to timber framework as inpannel of wooden doors, including replacing wooden beading, applying pink wood primer and two coats synthetic enamel paint etc complete all as specified and directed. 18 hacking out old broken glass ( any thickness, size, quality or description ) from wooden frame or / aluminium / metal frame, glazed with putty or fixed with beads complete all as specified and as directed. 19 s&f 3mm thick sheet glass ordinary quality fixing with oil putty / wooden / aluminium including rubber gasket beads in gf / ff, area of glass pane n.exc 0.50 sqm including replacing damaged beadings complete all as specified and as directed. 20 all as per item no.19 above but3mm thick figured glass pin head type 21 s&f in repairs cup & saucer kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 22 s&f in repairs cutlery kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket, roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 23 s&f in repairs partition kitchen basket of size 431x508x100mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel heavy size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 24 s&f in repairs plain kitchen basket of size 431x508x200mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 25 s&f in repairs plain kitchen basket of size 431x508x150mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 26 s&f in repairs dish ( plate ) basket of size 431x508x250mm, stainless steel, made out of not less than 3mm dia stain steel rod of grade 304 along with 01 set of telescopic channel ( heavy duty ) of size 300mmxx450mm long for each basket , roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete all as specified and as directed. 27 s&f in repair telescopic channel ( heavy duty ) of size 300mmxx450mm long and roller of size 45mmx25mmx20mm and magnetic and connected plate to shutters complete for each basket of kitchen cabinate complete all as specified and as directed. 28 m&l in repairs for prelaminated particle board 18 / 19mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed for cuboards / shelfs etc. complete all as specified and directed. 29 s&f in repairs 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 30 all as per item no: 29 above but 125mm long 31 s&f in repair 300mm long aluminium alloy, anodisedsliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 32 s&f in repairs ms 300mm long ordinary rat tail rod pattern springs including roller and roller plate to the wooden frames or ms frame including welding etc as required complete all as specified and directed. 33 s&f in repair 125mm extruded aluminium handles, cast type, anodised fixed complete all as specified and directed. 34 s&f in repair 150mm extruded aluminiumhandles, cast type, anodisedcomplete all as specified and directed. 35 s&f in repairs 40mm dia brass cup board knobs fixed with screw and washer complete all as specified and directed. 36 s&f in repairs 100mm long aluminium anodised hasp and staplecomplete all as specified and directed. 37 s&f in repairs 25 mm dia stainless steel drapery / curtain rod, complete all as specified and as directed. 38 s&f in repairs fancy type stainless steel curtain road bracket suitable for 25mm dia curtain rods fixed with chromium plated screws complete all as specified and directed. 39 s&f in repairs150mm long floor door stopper ofaluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, with rubber bush fixed complete all as specified and directed. 40 s&f in repairsaluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplesrate including taking down aluminium windows / wooden door / wooden windows of any size and refixing to same frame with all fixtures and screws as required to replacement / repair of window complete all as specified and directed. 41 s&f in repairs plastic moulded frame looking mirror of size 600mm x 450mm with selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 42 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises all as directed. 43 m&l for non skid ceramic coloured tiles 7 to 8mm thick, ( square / rectangular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, laid over 15mm thick screed bed in cement mortar 1:4 and set and jointed in neat cement slurry and pointed incoloured cement complete all as specified and as directed. 44 m&l for glazed ceramic coloured tilesover vertical surface of wall, 350x 250x 7mm / 450x350x7mm thick ( or nearest size ) , set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in cm ( 1:4 ) complete all as specified and directed. 45 m&l for vitrified ceramic tiles 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in cement mortar 1:4 and set and jointed in neat cement slurry and pointed incoloured cement complete all as specified and directed. 46 m&l for vitrified ceramic tiles 10 mm thick ( square / rectangular ) as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick in cm ( 1:4 ) complete all as specified and directed. 47 demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as directed. 48 m&l 18 20mm thick granite ( of any type ) pre polished in cooking platforms and like fixed with neat cement slurry over 15mm thck cement mortar ( 1:4 ) including pointing using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 49 taking down chowkat or framesnot exc 1.5 sqm each with shutter ( without taking of shutters from the frame ) complete all as specified and as directed. 50 taking down chowkat or frame with shutter ( without taking off shutter from frames ) exc 1.5 sqm and n.exc 4 sqm complete all as specified and as directed. 51 taking down shutter of any description exc. 1 sqm but n. exc. 2 sqm each complete all as specified and as directed. 52 s&f factory made solid panel pvc doorshutter 30 mm thick ( style ) consisting of frame made out of m.s. tubes for top & bottom rails. m.s. frame shall be covered with heat moulded plain colour pvc ‘c’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col our pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with suitable pvc sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified and directed. 53 s&f pvc solid door frame factory made size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced, with ms square, supplying and fixing in opening as per specification complete all as directed. 54 m&l 2nd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed. 55 m & l for preparing surfaces of wood and wood based materials, and treating back of chowkats with tar or coal tar black paint all as specified and directed. 56 s & f mild steelhold fast and similar small articlesconforming to fe 290 0 or e 165 all as specified and directed. 57 m&l for cement concrete type c1 1:3:6 ( 20mm graded aggregate ) for hold fasts complete all as specified. 58 s&f 35mm thick second class hard wood factory made plain framed panelled shutters ( two panes ) with lock rail and panel of 9mm bwp commercial ply or 12mm veneered particle board medium density with commercial veneering both face.the size of rail shall be as per is 1003 ( part i ) kiln seasoned and chemically pressure treated all as specified and directed. 59 s & f 35mm thick factory made 2nd class hw glazed / gauzed and skelton shutter open rebated and prepared to receive glass, gauzed etc edges of framing plain chamfered fitted with cut and mitred beads for securing wire mesh all as specified and directed. 60 s&f 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. 61 s&f stainless steel butt hinges medium weight with stainless steel pins 100mm long complete all as specified and directed. 62 s&f in stainless steel butt hinges medium weight with stainless steel pins 75mm long complete all as specified and directed. 63 s&f 150mm aluminium handles cast type ( anodised ) , fixed with steel chromium plated bright screws complete all as specified and directed. 64 s&f 125mm aluminium handles cast type ( anodised ) , fixed with steel chromium plated bright screws complete all as specified and directed. 65 s&f in repairs 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. 66 all as per item no 65 above but 125mm long 67 m&l forpreparation of new woodensurfaces of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. 68 s&f in repair aluminum door closer hydraulically regulated designation no. 2 universal type ( isi make ) suitable for door shutters of weight between 36 to 60 kg complete all as specified. 69 m&l for wrought plain fillets, square, rectangular or triangular in section area exc 13 sqcm and not 25 sqcm secured with nails and brads complete all as specified and directed including two coats of synethetic enamel paint over a coat of pink primer complete all as specified and directed 70 s&f in repair, plate rack of overall size 24 x 24 x 10 inchmade out of 0.65mm thick stainless steel sheet complete all as specified and directed. 71 s&f in repiars pvc connections 15mm dia with ptmt nuts of length 600mm complete all as specified and directed. 72 taking down pvc pipes including all fittings like shoes, bends, etc of any dia all as specified and directed 73 s&f 110 mm bore pvc ( swr ) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed 74 s&f 75 mm bore pvc ( swr ) pipe, single socketed in any length rubber joints fixed to walls complete all as specified and directed. 75 m&l in repairs, 75 mm dia pvc ( swr ) floor trap plainwith grating including jointing with solventcement complete all as specified and directed. 76 s&f 75 mm bore pvc ( swr ) bends in any radius complete all as specified and directed. 77 all as per item no. 76 above but for 110mm dia bore 78 s&f 75 mm bore pvc ( swr ) branch piece, single ( single y ) equal or unequal complete all as specified and directed 79 all as per item no.78 above but for 110mm dia bore 80 s&f in repair vitreous china squatting pan, orissa pattern, 630 x 450 mm with integral foot rests including connection to trap and to flushing pipe, anti syphonage pipe etc complete including making good to floor ( excluding flushing cisternand flushpipe fixed ) complete all as specified and directed. 81 s&f in repairvitreous china wash down water closet semi pedestal pattern ( anglo indian type ) , white, including pvc sheet cover with fixtures, black / white closed pattern with flat bottom, connection to drain and to flushing pipe, antisyphonage pipe etc ( excluding flushing cistern and flush pipe ) complete all as specified and directed. 82 s&f in repairvitreous china wash down water closet pan ( pedestal pattern ) , whiteincluding ss jet spray ( butterfly ) with braided tube 1.50 mtr and pvc seat cover with fixtures, black / white closed pattern with flat bottom ( excluding flushing cistern and flush pipe ) , including connection to drain ( or out going pipe ) complete all as specified and directed. 83 s&f in repairvitreous china wash basin white, flat back, size 550 x 400 mm including 15mm dia fancy type cp pillar tap, 32mm dia flexible waste pipe and fixing with brackets complete all as specified and directed. 84 s&f in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washer and including bedding in cm to wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. 85 s&f in repairs, pvcwater closet seat, black / white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device for ewc fixed as in repairs complete all as specified and directed. 86 s&f in repairpvc valveless, syphonic actiontype, 10 ltrs capacity flushing cistern low levelwhite with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed. 87 s&f unplasticised pvc pipes of pressure rating with all fittings and fixed to walls and ceilings or laid in floorsfor 15 mm bore of pipe including taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. 88 s&f unplasticised pvc pipes of pressure rating with all fittings and fixed to walls and ceilings or laid in floorsfor 20mm bore of pipe including taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. 89 s&f in repairs pvc waste pipe flexible 32mm or 40mm bore 60cm long for sink or whb complete all as specified and directed. 90 s&f in repairs 15 mm dia cp bib cock with flange complete all as specified and directed. 91 s&fin repairs 15mm bore cp stop cock regular bodycomplete all as specified and directed. 92 s&f in repair 15 mm dia cp pillar cock complete all as specified and directed. 93 s&f in repair 15 mm dia cp angle cock with flange complete all as specified and directed. 94 s&f in repair two way angle cock with flange complete all as specified and directed. 95 s&f in repair 5 overhead abs shower with brass arm 225mm with flange complete all as specified and directed. 96 s&f in repair health faucet with 1mtr ss tube and hook complete all as specified and directed. 97 s&f in repair corner glass shelf 300mm complete all as specified and directed. 98 s&f brass towel rack chromium plated makeprayag / jaquar or equivalent all as specified and directed by engineer in charge 99 s&f in repair brass cp soap dish complete all as specified and directed. 100 s&f in repair brass towel rail complete all as specified and directed. 101 s&f in repair chromium plated wall mixer with l bend complete all as specified and as directed. 102 s&f in repair chromium plated bib tap sink cock regular spout with flange complete all as specified and as directed. 103 s&f in repairs bathroom mirror cabinet plastic fixed to wall of size 300mmx 343mm x250 mm complete all as directed. 104 s&f in repairs cp centre hole basin mixercomplete all as directed. 105 s&f in repair magnet typepvc door stopper 30 to 40mm dia fixed with screw behind the door complete all as specified and directed. 106 supply only liquid water proofing compound...

Due Date : December 21, 2023

Tender Value : ₹ 14.99 Lakhs

View Tender
29
Archaeological Survey Of India - Gujarat

40612265 mw(cons.) to ancient site of samdhyapura, goraj, vadodara towards execution of work like removal of thick vegetation, old damaged/cracked plaster and applying fresh plaster, racking out the pointing, providing chain link fencing, applying paints, white wash, supply and spreading of good earth etc. as ment...

Due Date : November 21, 2023

Tender Value : ₹ 18.13 Lakhs

View Tender
30
Military Engineer Services - Gujarat

40439555 tender for periodical services and misc b / r repairs in omq and otm accommodation at af i under ge ( af ) jamnagar no.2; 1 m & l for preparation of old decorated surfaces of walls, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed. 2 m & l for preparation of old decorated surfaces of walls, plastered or unplastered and cornices, by brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white wash on ceilings complete all as specified and directed. 3 m&l for preparation of old surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed. 4 m&l for preparation of old surfaces of ceilings and applying one coat of oil bound distemper complete all as specified and directed. 5 m&l for preparation of old surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed. 6 m&l for complete removal of existing treatment on old surfaces wall and application of 3mm thick wall care putty complete all as specified and directed. 7 m&l for preparation of old surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed. 8 complete removal of existing treatment obd / plastic paint or any painting on wall incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying 2 3 coats of oil bound distemper over one coat of chalk white primer over and including 2 3mm thick wall care putty all as specified at an avg ht of 12 to 13 mtr incl all scaffolding and using safety equipments etc complete all as specified and directed 9 complete removal of existing treatment obd / plastic paint or any painting on ceiling incl brooming down, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying 2 3 coats of oil bound distemper over one coat of chalk white primer over and including 2 3mm thick wall care putty all as specified at an avg ht of 12 to 13 mtr incl all scaffolding and using safety equipments etc complete all as specified and directed 10 m&l for preparation of existing treatment of old surface including brooming down, scrapping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coat of acrylic emulsion ( exterior weather coat ) paint of any tint as approved complete all as specified and directed. 11 m&l for preparation of old decorated bybrooming down scrapping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying two coats of acrylic emulsion ( exterior weather coat ) paint of any tint as approved complete all as specified and directed. 12 m & l for preparation of old decorated bybrooming down scrapping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts on wall and applying one coat of cement base paint complete all as specified and directed. 13 m&l preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 14 m&l for preparation of old painted of steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 15 dismantling of floor, hearth or wall tiling, incl cement mortar bedding ( but not backing ) and rubbish off the premises including removal of debris to a distance exc 1.5 but n exc 2.00 km complete all as specified and directed. 16 demolition of cement concrete ( unreinforced ) in ground floors and pavings n.exc 15 cm thickness ( below or above g.l ) complete all as specified and directed. 17 m & l for 25 mm thick cement concrete type b0 1:2:4 ( using 12.5 mm graded stone aggregate ) as in levelling course in flooring complete all as specified and directed. 18 m&l for non skid joint free coloured ceramic tiles ( 1st quality ) not less than 7 mm thick of size exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over & including 15mm screed bed or bedding in cm 1:6 complete all as specified and directed. 19 taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debris to a distance exc 1.5 km but n. exc 2 km. complete all as specified and directed. 20 m&l for rendering 15mm thick in cm 1:6 on brick or stone walls to be finished even and smooth ( without using extra lime or cement ) including admixture of sbr ( cost of sbr including ) as per manufacture including fixing of scaffolding / padding if required upto 9mtr height complete all as specified and directed. 21 m & l for cement plaster 5 mm thick in cm 1:3 on concrete surface as on ceilling finished even and smooth without using extra cement complete all as specified and directed. 22 material & labour for applying two or more coats of 100% premium acrylic emulsion paint having voc less than 50 gm / litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade ( company depot tinted ) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces complete all as specified and directed. 23 m & l for preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. 24 taking down shutters of any description n.exc 1 sqmeach 25 s&f 25 mm thick cupboard flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. 26 m&l for preparing sufaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of synthetic enamel paint complete all as specified and directed. 27 s&f in repair 18 / 19 mm thick plywood ( 12 nos of ply ) grade bwr, typebb fixed width screwsto timber frame work or ply wood for kitchen cupboard, shelves and cupboard complete all as specified and directed. 28 m & l for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive for kitchen cupboard, shelves and cupboard as per manufacturers instructions complete all as specified and directed. 29 s&f 75mm size ss cup board hinges medium weight cold rolled complete all as specified and directed. 30 s&f magnatic catcher and connected plate to shutters and frame as per sample complete all as specified and directed. 31 s&f 100mm long aluminium handle fabricated type anodised complete all as specified and directed. 32 s&f in repair telescopic channelof size 450 mm ( when closed ) , mild steel chromium plated, roller type, heavy duty etc complete all as specified and directed. 33 s&f in repair kitchen basket fabricated with stainless steel section ( ss 304 ) , best quality of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed. 34 s&f in repair kitchen basket fabricated with stainless steel section ( ss 304 ) , best quality of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed. 35 s&f in repair kitchen basket fabricated with stainless steel section ( ss 304 ) , best quality of size 430 mm x 508 mm x 300 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position. 36 fixing only old kitchen basket of any size 430 mm x 508 mm x 100 / 200 / 300 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed. 37 s & fin repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to wooden / metalic door / window shutters with aluminium wire staples or necessary rubber beading and screws complete all as specified and directed. 38 s & f in repairs25 mm dia curtain rails, mild steel, chromium plated with fixing brackets / concealed brackets & holders, stops, rollers etc. decorative typecomplete all as specified and directed. 39 hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. 40 s&f 4 mmthick glass sheetordinary quality and glazing with oil putty / rubber beeding / m seal etcn.exc 0.50 sqm in each pane fixed to wooden / metalic frame complete all as specified and directed. 41 m&l for repairing of chajja / roof projection by taking down old plaster, damaged concrete surface, cutting of exposed reinforcement and making good with 1:4 including admixture of sbr ( cost of sbr including ) as per manufacture, and provide reinftcement concrete 1:2:4type b1 as required, necessary scafolding, formwork etc up to 9 mtr heigh andapplying 10 mm thick rendering in cement mortar 1:3 , finishing the surface even & smooth with out using extra cement complete all as specified and directed.note: reinft will be paid separately. 42 m&l for ms steel tmt bars 10mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia complete all as specified and directed....

Due Date : November 21, 2023

Tender Value : ₹ 35 Lakhs

View Tender
31
Road And Building Department - Gujarat

40417233 current repair to various road of rajkot and kotdasangani taluka under dist. r & b division dist. rajkot ( pro. jungle cutting & white wash ) ...

Due Date : November 20, 2023

Tender Value : ₹ 5.55 Lakhs

View Tender
33
Archaeological Survey Of India - Gujarat

39554570 mw(cons.) to ancient site of samdhyapura, goraj, vadodara towards execution of work like removal of thick vegetation, old damaged/cracked plaster and applying fresh plaster, racking out the pointing, providing chain link fencing, applying paints, white wash etc. as mentioned in boq....

Due Date : September 29, 2023

Tender Value : ₹ 18.13 Lakhs

View Tender
36
Road And Building Department - Gujarat

38514361 annual rate contract work for various item for building maintenance / minor works to be carried out under r&b division ( foundation, concrete work, masonary work, demolation, steel work, white wash / colour wash, doors & windows ) etc....

Due Date : July 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
37
Navodaya Vidyalaya Samiti - Gujarat

38002994 tender for goods supply and service contract. 01 dryration 02 vegitable and fruit 03 grain flooring 04 ro plant amc 05 cleaning items 06 photo copy xerox 07 tuck shop 08 labour for white wash 09 hair cutting 10 washing and presing of 11 hiring of jcb tractor 12 selling of other equip 13 selling of scrap 14 cement grit and bricks...

Due Date : June 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
38
Ministry Of Road Transport And Highways - Gujarat

37854745 maintain and repair to n.h. no. 927 k ( ranavav bhanvad khambhaliya ) , n.h. 151 k ( porbandar bhanvad jamjodhpur kalavad ) & n.h. 151ad ( khambhaliya advana porbandar ) under n.h. sub division, porbandar ( 1 ) painting & white wash works including labours, material & machinery...

Due Date : June 01, 2023

Tender Value : ₹ Ref. Documents

View Tender
39
Ministry Of Road Transport And Highways - Gujarat

37579318 annual rates 2022.23 of mand r works of nh927d btn km 0.0 to 18.8 and nh351 btn km.119.0 to 181.2 and nh351g btn km 116.600 to 203.620 and nh27 btn km 185.230 to 216.000 under nhsd rajkot painting and white wash works...

Due Date : May 23, 2023

Tender Value : ₹ Ref. Documents

View Tender
40
Ministry Of Road Transport And Highways - Gujarat

37579295 annual rates 2022.23 of mand r works of nh927k ranavav bhanvad khambhaliya and nh151k porbandar bhanvad jamjodhpur kalavad and nh151ad khambhaliya advana porbandar under nhsd porbandar painting and white wash works...

Due Date : May 23, 2023

Tender Value : ₹ Ref. Documents

View Tender
41
Jawahar Navodaya Vidyalaya - Gujarat

37567105 tender for supply of kirana, vegetables, fruits, uniform, bedding items etc for the year 2023 24. => tender for supply of colour items for the year 2023 24 reg. 1 05 kg. suraksha 2 10 kg. sojat 3 tractor uno distamber white 20 ltr. pack tin asian 4 20 ltr. pack tin asian 5 04 ltr. pack tin asian 6 exterior primer ad. 5633 20 ltr. pack tin asian 7 20 ltr. pack tin asian 8 04 ltr. pack tin asian 9 20 ltr. pack tin asian 10 20 ltr. pack tin asian 11 10 ltr. pack tin asian 12 20 ltr. pack tin asian apco gloss enamel white oil paint ace exterioe 0051 ( 7326 ) ace exterioe 0051 7641 ace exterioe 0051 7661 ace exterioe 0051 7958 oil paint for door ect.... => maintenance of computers & printers & toner refilling for the year 2023 24 01 acer / hp / lenavo monitor 02 acer / hp / lenavo cpu 03 acer / hp keyboard 04 acer / hp mouse rates for annual maintenance of the above items are as follows b.printers 1 brother laser jet printer hl l2321d. 2 hp laser printer 1020 3 canon mf 235w 4 hp 108w c. rates for annual maintenance of the above printer as under 01 with parts 02 without parts d.refilling of toner cartridge of following printers sl.no name of printers 1 brother laser jet printer hl l2321d. 2 hp laser printer 1020 3 canon mf 235w 4 hp 108w e. maintenance of smart lab lap top ( internet connectivity, lan, regular maintenance etc. ) ect... => all ( basic, cess, cst / lst if applicabe from the point of despatch, insurance, freight from despatching point to specified destination ) for delivery at jnv vadnagar. 1 tooth paste 50gms 2 hair oil 50 ml 3 bathing soap 100gm 4 washing soap ( 100 gm ) 5 tooth brush 6 sanitary napkin for girls ( 01 pkt ) 7 black shoes polish liquid 8 white shoes polish liquid => tender form for electrical items , 1 1 one way switch ( 6 a.p. ) 2 two way switch ( 6 a.p. ) 3 five pin socket ( 6 a.p. ) 4 modular switch ( 6 a.p. ) 5 modular switch ( 20 a.p. ) 6 modular socket ( 6 a.p. ) 7 modular socket ( 20 a.p. ) 8 two modular fan regulators 9 modular fan regulator ( socket type ) 10 s. s. 20 a.p. combined box 11 switch 20 a.p. 12 socket 20 ap 13 6 a.p. top 14 16 a.p. top 15 |16 volt cfl => tender form for fruit 1 mango …… dasehri ( medium ) 2 mango …… kesar ( medium ) 3 mango …… badam ( medium ) 4 banana big size ( mention dozen rate ) 5 apple 6 chickoo 7 orange 8 sweet lime ( mossumbi ) 9 pomegranate ( anar ) 10 guava ( jamfal ) 11 aavla => tender form for grinding wheat chanadi dal sugar => tender form for hair cutting for boys and girls => tractor, j.c.b. machines, rotavators etc. for hire 2 / 2 price list 2023 24, fertile soil – 4 brass soil in hyva truck – ૧ ( giving price of one truck / 4 bras of soil ) fertile soil – ૨ 4 brass soil in hiwa truck – ( price of one tractor / 2 brass soil ) land leveling work by tractor 3 ( giving price per hour ) land plowing work by tractor ૪ ( pricing per hour ) weeding work with rota wetter ૫ ( pricing per hour ) tillage by jcb machine and leveling work ( pricing per hour ) clean water tanker ( approx 4000 litres ) ( giving cost of carrying a tanker water tractor to ghwara vidyalaya ) => price list for hire of mud pumps 2023 24 => tender for hiring of vehicle => tender for labour work for white wash / colouring / painting , 01 white wash ( lime ) ( oll 8 ( h ) 02 primer work 03 oil paints work ( oil base ) ( ) 04 water base ( acrylic distemper ) water base ( acrylic distemper ) 55 05 snowsem ( lime chemical ) ( + ) 06 distemper with putty work 07 distemper without putty work 08 lapi work ( at 514 ) 09 desk bench wizell els => tender form for m & r work ( construction ) items ( for maintance & repair of jnv campus ) river sand or natural sand as a construction materials bricks ( standard brick size ) bricks pieces wonder cement arbuda cement aggregates ( jelly ) / bajari cement blocks ( standard block size ) cotastone ( 2x2 ) in feet tiles white ( 1 x1 ) in feet cement roof sheet 10x3.5 colour coated sheet ( size 14 x 41 x 0.60 mm colour blue ms channel ( angle ) ( size 75 x ms pipe ( size 50 x 50 x 4 mm ) mason work labour work => tender form for piumbing items, kaplin half of the g.i. kaplin 1 2 his g.i. kaplin 3 4 5 6 7 8 9 10 11 12 13 14 15 gi of 1” kaplin savani g.i. kaplin one and a half g.i. kaplin compliant for hot water half of the g.i. kaplin his g.i. kaplin gi of 1” kaplin savani g.i. kaplin one and a half g.i. kaplin elbow half of the g.i. elbow his g.i. elbow 1” of g.i. elbow sawano g.i. elbow one and a half g.i. elbow gi of 1 1 / 2 akbo gi of 1 1 / 3 elbow half of the g.i. elbow gi of 1 1 / 4 elbow half the gi for elbow hot water. elbow his g.i. elbow 1” gi. elbow sawano g.i. elbow one and a half g.i. elbow gi of 1 1 / 2 elbow gi of 1 1 / 3 elbow half of the g.i. elbow gi of 1 1 / 4 elbow => tender form for washing cloth, rate for washing & ironing of students one pair uniform rate for ironing of students one pair uniform rate for washing of students one pair uniform rate for washing bedsheet rate for washing pillow cover rate for washing sweater rate for washing sholapuri chadar / blenket rate for washing curtains ( size 8 x3.5 ) => tender form for dry ration, ajma ( egmark ) machine cleaned, good quality beans standard mark, cleaned beans ( chola ) standard mark, cleaned chana dal standard mark, cleaned cummins seed ( whool ) ( egmark ) machine cleaned, good quality deshi chana standard mark, cleaned deshi rajma ( beans ) standard mark, cleaned ( big size ) despatching point to specified destination ) for delivery at jnv vadnagar. gram ( kabuli big piece ) standard mark, cleaned green gram ( half with cover ) standard mark, cleaned jaggery popot / peocack brand, kolhapuri good quality jawahar navodaya vidyalaya, vadnagar dist. mehsana, gujarat mag chadi dal standard mark, cleaned menda flour uttam brand methi seed ( small ) ( egmark ) machine cleaned, good quality moong whole standard mark, cleaned mustard seed ( small ) ( egmark ) machine cleaned, good quality nyutrella ( soyabin ) vadi standard mark, cleaned peas ( green ) standard mark, cleaned pulses masoor standard mark, cleaned pulses tuar angoor oiled deshi pulses tuar laxmi, oiled deshi red chilly ( whole ) ganture, good quality rice jirasar old, chandan brand, good quality, good brand rice old parimal, good quality sago good quality, cleaned sfa ] , l r6f sdm8ff ;fo sz [ , f4 ;fzlhftgf4 ;fzl u ] 6jtf jf / f soyabin oil fortune ( 15 kg tin ) soyabin oil tirupati ( 15 kg tin ) sugar big piece udad dal standard mark, cleaned wheat ( 496 ) tukdi good quality, cleaned wheat flour ashirvad i t c wheat flour dadisha chakki fresh aata => tender for saling scrap items, .. ૧ answer key ( give price per kg ) ૨ old newspapers ( provide price per kg ) n 3 old text books ( provide price per kg ) ૪ old large notebooks ( books ) ( give price per kg ) → oil can – ( a – good quality ) ( giving price per can ) – n s oil can ( b medium quality ) ( giving price per can ) 6 ) oil can – ( excluding c – a, b ) ( giving price per can ) – ૮ jute sacks ( of sugar and wheat ) ( price per piece ) ૯ plastic bags ( for 25 kg dal rice ) ( price per piece ) ૧૦ plastic bags ( for 50 kg flour ) ( price per piece ) plastic containers, pickles etc. ) ૧૧ ( give price per kg ) cartoons / cartons ( boxes of biscuits, soap etc. ) ૧૨ ( give price per kg ) ૧૩ ૧૪ iron / scrap ( provide price per kg ) iron sheets / scrap ( provide price per kg ) => tender form for sports items 1 hand ball nivia man pro touch men code: hb 3651 unit 5 2 hand ball nivia woman pro touch women code: hb 3652 unit 5 3 hand ball nivia grip handball men code: hb 3657 unit 5 4 hand ball nivia grip handball woman code: hb 3658 unit 5 5 stop watch nivia js 307 unit 5 6 knee support nivia, ks 586 unit 1 7 whistle fox 40 unit 5 8 hocky net jonex all double nylon international l quality pair 2 9 volley ball net nivia code vb 5603 unit 5 10 volley ball nivia pu volleyball code vb 476 size 4 unit 5 11 volley ball nivia merger code vb 484 size 4 unit 5 जवाहर नवोदय 􀍪व􀉮यालय वडनगर िजला मेहसाना ( गुजरात ) jawahar navodaya vidyalaya, vadnagar dist. mehsana, gujarat tender form for sports items i / we submit financial bid for the supply of below mentioned items as per terms & conditions of tender notice of jnv vadnagar, which are acceptable to me / us. rate quoted are inclusive of all ( basic, cess, cst / lst if applicabe from the point of despatch, insurance, freight from despatching point to specified destination ) for delivery at jnv vadnagar. 12 volley ball nivia g 2020 code: vb 496 size 4 unit 5 13 volleyball antina nivia code va 799 size 1.8mtrs pair 5 14 volleyball post nelco 3 dia fixed post set with adjustable height code ns5020fvp pair 2 15 measuring tape freemans measures fiber open reel 30 m unit 1 16 measuring tape freemans measures fiber open reel 50 m unit 1 17 measuring tape freemans measures fiber open reel 100 m unit 1 18 chess clock nivia code dg 566 unit 1 19 foot ball nivia cross world code fb 468 size 5 unit 5 20 foot ball net nivia fb 5606 ( honey comb mesh strong silk length 7.32 mtr. height 2.44 mtr. net mesh hole: 12 cm ) unit 1 21 foot ball net nivia fb 5608 ( square mesh pe length 7.32 mtr. height 2.44 mtr. net mesh hole: 12.5 cm ) unit 1 22 shuttle cock nivia shuttle gx 001 code bd 697 durable nylon shuttle, training grade, 6 pcs in tube box 5 23 badminton pole nelco sq.fixed post set with pulley for net adjustment code ns5040fbp pair 1 24 badminton net vixen t.m.q nylon code 715 unit 2 25 badminton net yonex badminton nylon net 143c pro, badminton net unit 2 26 badminton racket nivia graphite composite steel shaft ( jointless ) solar 5600 code bd 707380 unit 6 27 basket ball nivia bb 201, engraver size 7 unit 2 28 basket ball nivia bb 202, engraver size 6 unit 2 29 basket ball nivia pro touch bb 240, size 6 unit 2 => tender form for stationary items, printing paper a4 size paper, long book a4 , set of practical book pen, pencil etc..... => tender form for sweet / dairy items, 1 jalebi ( made in pure ghee ) – good quality 2 jalebi ( made in oil ) – good quality ૩ ૩ big chur ladoo ( made in shudh dhee ) – good quality big chur ladoo ( made in oil ) – good quality t bundi na ladoo ( made in suddha ) – good quality 5 bundi na ladoos ( made in oil ) – good quality 6 black law 7 8 gulab jamun 9 amul shrikhand ( cardamom ) ( 100 gm ) 10 amul shrikhand ( cashew pistachio ) ( 100 gm ) 11. drink a cup of milk of good quality 12 have a cup of milk – good quality ice cream 1 amul cashew grapes 2 amul saffron pistachio ૩ amul rajbhog => tender form for cleaning material acid, phenyl & other meterials 1 hydrochloride acid ( strong ) 2 white cleaner ( phenail ) 3 black cleaner ( phenail ) 4 soft brooms good quality 5 soft brooms good quality 6 hard brooms good quality 7 jute duster cloth ( pochha ) = > tender for oprating pco for 1 year => tender form for uniform stitching => tender form for vegetable => annual maintenance contract of water purifiers 20” bowl 2 20” spun filter 3 20” cto cartage 4 solenoid 5 ac dc adapter 6 uv system 7 pump 100 gpd 8 s s skid 9 3 / 8” pipe 10 3 / 8” elbow 11 3 / 8” inlet valve 12 float 13 inline cartage 14 service charge per machine...

Due Date : May 29, 2023

Tender Value : ₹ 50 Lakhs

View Tender
42
Sardar Sarovar Narmada Nigam Limited - Gujarat

37504157 tender for constructing of perapet wall of size 0.150 m * 0.300 m on the approach of pushpawati causway at chainage 314.696 km and khari 1 causway at che 321.115 km with white wash on narmada main canal....

Due Date : May 16, 2023

Tender Value : ₹ 3.88 Lakhs

View Tender
46
Archaeological Survey Of India - Gujarat

37254112 towards execution of work like removal of thick vegetation, old damaged / cracked plaster and applying fresh plaster, racking out the pointing, providing chain link fencing, applying paints, white wash, supply and spreading of good earth, trenching, etc...

Due Date : May 05, 2023

Tender Value : ₹ 18.78 Lakhs

View Tender
47
Sardar Sarovar Narmada Nigam Limited - Gujarat

36950754 tender for constructing of perapet wall of size 0.150 m * 0.300 m on the approach of pushpawati causway at chainage 314.696 km and khari 1 causway at che 321.115 km with white wash on narmada main canal....

Due Date : April 06, 2023

Tender Value : ₹ 3.88 Lakhs

View Tender
48
Archaeological Survey Of India - Gujarat

36558861 mw ( cons. ) to ancient site of samdhyapura, goraj, vadodara towards execution of work like removal of thick vegetation, old damaged / cracked plaster and applying fresh plaster, applying paints, white wash, supply and spreading of good earth, trenching, etc...

Due Date : March 21, 2023

Tender Value : ₹ 18.78 Lakhs

View Tender
50
Ministry Of Defence - Gujarat

36302458 bids are invited for miscellaneous items 02 inch square pipe , 01 inch square pipe , self drilling screw , screw drilling bit , welding gogals , rcc drill bit , welding rod , nail , gripping gloves , room freshner , screw driver set , hammer with nail remover , mosquito replant , pencil marker , grinder cutter , grinder blade , plastic bend , hexa blade , cable tie , emery paper , heavy duty adjustable , screw driver , machine charger , lime white wash powder total quantity : 491...

Due Date : February 27, 2023

Tender Value : ₹ 48500.0

View Tender