Tender For Work Of New Alluminum Office Inside Main Store At Dsd Mehsana -1.00 7.50 Providing and constructing 115/100 mm thick brick masonary in partition walls with approved good quality bricks having a crushing strength of 40-50 kg/sq.cm for super structure in CM 1:4 ( 1 cement : 4 coarse sand ) including scaffolding, racking out joints, curing etc. complete as directed at all heights as follows. 2.00 17.00 Providing and applying 12m thick cement finish plaster at all heights and below plinth in 1:4 cement mortar to the walls, beams, ceiling, stair , column, pardis, bends, moulds, pattas, grooves including scaffolding, curing & finishing smooth. The plaster surface shall be rubbed with Iron plate , till the surface shows cement paste in line and level complete as directed. 3.00 17.00 Providing and applying (with rollers only) Plastic emulsion paint of required shed and approved make on new/old work in two or more coats to give an even shed including the preparation of surface for painting, applying primer and putty, at all heights complete as per manufacturers specification and as directed. 4.00 2.50 Labour charges of chipping of the smooth/sand faced plaster dado from the existing wall surface,F/ceiling including necessary scaffolding, removing the debris outside of site as directed etc. all complete. 5.00 2.10 Providing & fixing color anodized Aluminum door having frame of 101.6 x 44.5 x 2.82 mm th weight 2.236 kg/Rmt shutter shall be made from style 85.0 x 44.45x 3mm th weight 2.05 kg/Rmt Top and bottom fail 95.25 x44.45 x 2mm th weight 1.519 kg/Rmt. Lock rail 150 x 44.45 x 2.65 mm th weight 2.646 kg/Rmt beading clip 19x17.20 mm weight 0.124 Kg/Rmt 5.5 mm th float glass and 12mm thick pre laminated particle board (Both side lamination) exterior grade shall be used as directed. 125 mm long 4 nos stainless steel hinges shall be fixed on shutter. Rate shall include copper door lock of approved make Handles of approved design, concealed tower bolts,door closer. Neoprin Rubber gasket, fixing with all colour as directed aluminum section shall be Jindal make or equivalent section of HIndalco. Aluminum frame shall have in built projection for door stopper with groove for rubber gasket. Detail as per architects drawings.6.0 Providing & fixing in position color anodized aluminum window / ventilator. Sliding / partly openable / fixed type with all frame, size ad shape as per architects detail including supplying and fixing necessary holdfast, all fixtures and fastenings of anodized aluminum as per requirement and float glass 5.5 mm thk fixed with special gasket felt and aluminum beading complete as per drawing and directed by site engineer (Aluminum sections to be used shall be of Jindal make of Series - 25 mm medium duty or equivalent section of Hindalco etc as approved by the Engineer - in - charge. 6.01 3.00 -do as above but for Al. copper anodised windows openable/ sliding type with frame - 3 track with Glass and s.s.mosquito net etc.7.00 18.00 Providing and fixing powder coated aluminium fixed type glass panelling (partition) windows / ventilator fabricated out of extruded sections confirming to BIS IS 733 and wall thickness not less than 3mm as detailed in the drawing of specified size and shape with powder coating minimum 40 micron of approved shade, including supplying and fixing the frame and sub frame with expansion bolts / screws, necessary cleats for jointing with cadmium coated screws/ bolts nuts including providing and fixing glazing using 5 mm thick float glass with EPDM gasket felt, filling the gap between masonry/concrete/stone surface of soffit/jambs/cill and outer frame by approved gun grade suitable silicon sealant of matching colour, etc complete as per drawing and as directed.