Tender For Structural Erection & Equipment Erection 27020382 10 10 20 ERECTION & COMM.OF PLANT EQUIPEMENTS 160 TO 30 SUPPLY OF UN SKILLED LABOUR 2,400 TAG 10 UNLOADING & ERECTION OF STRUCTURE 700 TO Email : GOPAL.THUMMAR@AMNS.IN Contact : Name : Gopal Thummar Item Details : AMNS Scope1. Drawings, QAP approved Document, Delivery Schedule will be provided by AMNS 2. Electrical Power <(>&<)> water. AM/NS will give required power for the execution of job on free of cost basis at one point. 3. Any structural steel, plates required for the execution of the job. 4. Equipment’s Grouting job Scope of the Contractor related to the Erection <(>&<)> alignment of Mechanical equipment’s : 1. Job Procedure/ITP/ WPS/PQR for work to be submit before commencement of work. 2. Unloading, Shifting, Unpacking, and stacking of equipment/structures at the designated place (Storage yard). 3. Maintaining equipment wise location tracking <(>&<)> shifting to site for erection as per requirement. 4. Open package inspection of each package with OEM <(>&<)> AM/NS. 5. Co-ordinate with AM/NS and equipment supplier for the planning of sequential and quality work execution in accordance with the best engineering practice. 6. Fixing of permanent datum marks for future reference. 7. Checking the equipment’s foundation in accordance with the erection drawing, marking of centre lines and levels with reference to the benchmark. 8. Preparing <(>&<)> taking handing over protocols with civil equipment foundations. 9. Fixing of pad plates as per required level. 10. Erection and alignment of Technological structure, Mechanical equipment (metallic <(>&<)> non-metallic), Non-metallic chimney, N on-metallic tanks, Electrical equipment like motors, Pneumatics equipment, etc as per the layout <(>&<)> alignment a specifications of OEM. 11. Erection and alignment of structures, platforms, gratings, handrails etc. 12. Preparation of the protocol of the final alignment <(>&<)> submit the same to concerned authority of equipment Supplier <(>&<)> AM/NS for their review. 13. Checking of the Final alignment by concerned authority of equipment Supplier <(>&<)> AM/NS. Correction needs to be done in the alignment if found beyond tolerance limits. 14. Protocol of Final alignment reading to be signed by representatives of erection team, equipment Supplier <(>&<)> AM/NS representatives. 15. Clearance for final grouting of the equipment’s. 16. Assembly of equipment at site, Drilling tapping work (if any), 17. First filling of oil and lubricants. First fill will be provided by AM/NS. 18. Fixing of the instruments on the equipment as per the drawing. 19. Assisting in Cold <(>&<)> Hot Commissioning of the line. 20. Attend the work if any during commissioning. 21. All required consumables like - gas cutting cylinders (oxygen <(>&<)> DA), welding rods of all types, Argon cylinder, welding rod for Argon, grinding wheels, Tig welding machine, cutting wheels, wire rope for equipment lifting <(>&<)> shifting, die penetration kit for welding Page 2 of 8 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112424 Date 14.05.2024 Submission Date 21.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Roopesh Kumar Contact Email ROOPESH.KUMAR@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details testing, Cold bending machines for pipe bending etc in scope of contractor. 22. All tools, tackles, consumables <(>&<)> instruments required like arc welding machines, argon welding machines, cutting sets, Pug cutting machines, Hydraulic jacks <(>&<)> pumps, Puller, chain pulley blocks, all types <(>&<)> sizes of Spanners etc. All types of measuring equipment like micrometres, Vernier gauge, Piano wires, Total stations, Torque wrenches, Automatic surveyor’s level, Theodolite, Dial Gauge, Feeler gauges, Slip gauges, will be in scope of contractor. 23. Equipment’s required for material shifting, stacking and erection like Farhana, Forklift, Trailers etc. will be in scope of contractor and ensuring adequate number of equipment to perform parallel erection activity throughout the length 24x7. 24. Cranes <(>&<)> Man lifter required for erection will be in scope of contractor. 25. All alignment tools/ instruments should be of highest standard quality and having zero error. Calibration report to be submitted to AMNS. 26. Preparation of proper scaffolding platforms for height works including railings, toe guards. Scaff holding material (Cup Lock type <(>&<)> Planks) and certified scaffolding inspector. 27. Ensuring enough quantity of scaffolding material to execute erection activities through the length of line. 28. All height work approach to be done only with man lifter. 29. Farhana F15/ F23 for internal shifting of equipment’s. (Hydra is not allowed) 30. Cutting of plates for fabrication/trench covers etc to be done using pug cutter only. 31. Misc. requirement related to erection of the equipment’s. For example, Hole drilling, minor slot cutting as per requirement etc. 32. Balancing work of Blowers as and when required (If Vibration found beyond the Norms during Trial or Commissioning). 33. Erection of technological structure to be done with mobile cranes. 34. Equipment erection to be done with mobile cranes till availability of EOT crane. 35. Correction required need to be done to equipment base, minor modification in civil foundation, structural material as per site c ondition <(>&<)> requirement of project. 36. All structures/ equipment to be properly cleaned prior to erection and should be free from dust. 37. Resources deployment plan to be submit as per requirement of project. 38. Working hour for contactor’s manpower will 24 x 7, or as per requirement of site condition. Scope of the Contractor related to the Erection <(>&<)> alignment of Structure : 1. Making of Suitable Bed for for Controlled Assembling of Portal, Columns, Bracings Wherever Required. Dismantling the bed and load ing/unloading at given area or as per instruction of AMNS engineer if required. 2. All Machines, Equipment’s, <(>&<)> Tackles including Jacks (Manual <(>&<)> Hydraulic). Third party/ govt approved agency test certificate required for machinery/ tools <(>&<)> tackles/ equipment. 3. Calibration Certificate by third party/govt approved agency of all Machineries used by Contractor. 4. Unloading of Prefab Steel Structures <(>&<)> Proper Stacking with wooden packing at Erection Site or Storage yard as per AM/NS in structions. Wooden packing shall be in scope of Vendor . 5. All Fasteners required for Preassembly <(>&<)> Erection of AM/NS approved make <(>&<)> as per specs mentioned as per Drawings. 6. Thorough cleaning of Structures to wipe of dust /muds etc. before erections shall be in scope of vendor. Vendor Should made appropriate arrangement for the same at site. 7. Welding Consumables of Approved Manufacturer. 8. Consumables other than Welding consumables Such as Grinding Wheel, Cutting Wheel, Buffing Wheel, Drill Bit/ Core Cutter, DA, Oxygen etc. Page 3 of 8 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112424 Date 14.05.2024 Submission Date 21.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Roopesh Kumar Contact Email ROOPESH.KUMAR@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Spares for Machineries, Tools and Tackles. 9. Supply of Crane, Farana , Manlifter , trailer etc. 10. Controlled Assembly for Columns, Rafters, Bracings, Galleries. 11. Calibrated Measuring Instruments required for Dimensional Checking. 12. Manpower should be as per Project Requirement to meet the Time line. 13. Site In charge, Erection Foreman <(>&<)> Planning Engineer to expedite Progress. 14. QC Engineer, Safety Personal (Certified by AMNS QC Team). 15. Adequate Skilled Manpower for Assembling Work as per Project requirement. 16. QC Checking <(>&<)> Offer for AMNS Inspection in Prescribed Format. 17. Welding Consumable Issue Record, Welding Consumable Baking Record <(>&<)> WPS Record. 18. Daily Progress Report in Approved format by AM/NS. 19. Service Support during <(>&<)> After Client inspection and rectification if required. 20. Labour License, Compliance of statutory requirements as per Govt. norms <(>&<)> AMNS policies, PF/ESIC/Insurance Requirements. 21. Processing of Gate Pass <(>&<)> Other Formalities. 22. Monthly Materials Reconciliation Report. 23. Worker accommodation. 24. Transportation of workers to Worksite. 25. Housekeeping at Worksite daily - Area Cleaning after work completion and during site evacuation. 26. PPEs for Workers, Supervisors engaged. 27. Surveyor with Total Stations for Alignment of Structures and offering for inspections. 28. Safety Apparatus like Flashback Arrester, Dial Gauge, Conduit Pipes Flexible Wires, DB with Proper Rating ELCB/RCCB. AM/NS INDIA CRM#2 PROJECT 2 29. Providing Lifeline, Safety Harness, safety/florescent jacket, Fall Arrester, Safety Net, Ladder wherever required. 30. Turn Buckles, Jacks of required Capacity. 31. Anywhere for whatsoever reasons due to unavailability of access for man lifters, Scaffolding shall be in scope of vendor. Scaffolding should be tested by Scaffolding inspector. Arranging scaffolding inspector shall be in scope of vendor. 32. Fixing of Mounting Bolts for Assembly wherever required. 33. Levelling, Alignment, <(>&<)> Handing Over for EOT Erection, 34. Supply of Required Approved fasteners as per approved Construction Drg /AM/NS Requirement for Erection work. 35. Any Touch Paint required before erection /Post Erection Shall be in scope of Vendor. 36. Header and Down Take Pipe (Roof Drainage System) shall be integral part and parcel of Structural Erections. Accordingly, Vendor shall be provided with Pipes of appropriate sizes duly blasted and painted. 37. All Erection Methodologies /Method Statements shall be made by Contractor and Shall be put for Approval before AM/NS. 38. Tolerances in Structural Erection Shall be according to IS 12843 (Latest Revision). 39. Vendor Should follow Safety in Structural Erection as per IS 7205. 40. Vendor is liable to Complete their scope of Work within the battery limits of height and operating radius of Cranes. 41. Vendor shall make appropriate arrangement of any structural erections by conventional methods, by using chain blocks, manual lif ting, using scaffolding etc in case work is not accessible by Cranes ,Manlifter etc. . However, lifting plans must be approved by AM/NS Execution and Safety Team. 42. QAP / Job Procedures / WPS/ PQR / Submission of final quality dossier as per approved ITP. 43. Submission of QAP/ITP inspection formats, PQP (Project quality plan) for approval. 44. QA/QC Documentation as per AMNS Requirement (Weld Visual, NDT <(>&<)> Final inspection). 45. Keeping qualified and competent QA/QC staffs for maintaining and monitoring quality across the entire project and mitigate/taking corrective and preventive action of any non-conformity arises. Page 4 of 8 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112424 Date 14.05.2024 Submission Date 21.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Roopesh Kumar Contact Email ROOPESH.KUMAR@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Project tentative time Schedule – Unit Erection Start time Duration (Max) ARP-3 Aug-2024 6 Months General Points - 1. Contractor shall depute adequate number of skilled, semi-skilled <(>&<)> un-skilled labours under various categories like; Mill wright fitters, Foreman, fitters, riggers, fabricators, certified welders, pipe fitters, instrument tube fitters to execute the job as per the time schedule. 2. Contractor shall depute adequate number of experienced engineers and supervisors to supervise <(>&<)> planning the erection activities. Adequate number of safety supervisors. They have to execute the job in coordination with OEM <(>&<)> AM/NS team. 3. A qualified safety manager to be deployed with complete safety org chart. 4. A qualified <(>&<)> competent QA/QC engineer to be deploy to meet QA/QC standard of AMNS. 5. Contractor shall arrange all necessary statutory requirements such as PF, ESIC, Insurance, Labour License for workmen <(>&<)> staff. 6. Contractor shall arrange necessary accommodation and local conveyance for workmen <(>&<)> staff. 7. Contractor must follow the safety rules of AM/NS. 8. Opening of the wooden box/steel box of the material in contractor scope. Wooden material / steel box to be cut in 1m x1m size and shifting of the same to scrap yard in contractor scope. 9. Packing list received from material boxes to be submitted to AMNS. Loose items to be kept properly in rack/boxes. 10. Proper housekeeping of the erection area in contractor scope. 11. Contractor shall provide all the personal protective items like boiler suit, FRP helmet, safety shoes, reflective jacket, goggles, hand gloves to all the team members according to the requirement and ensure 100% use of the same. 12. All erection and related work shall be carried out by the Contractor according to the equipment supplier’s drawings/documents. 13. AM/NS will provide the required drawings/ documents of the equipment required for the erection. The Contractor shall return the same after completion of job. 14. Shifting of scrap to the designated scrap yard. 15. All staff, supervisors, workmen should be provided with uniform <(>&<)> boiler suit and uniform must wear while working on site. Information to be Provided in the Technical offer – Technical offer should have the following information’s – 1. Confirmation of all the points mentioned in AM/NS Inquiry. 2. Quality assurance plan. 3. Manpower deployment plan. 4. Equipment deployment plan. 5. List of tools <(>&<)> tackles 6. List of material handling equipment like Farhana, Forklift, Trailers Etc. 7. Reference list for similar kind of jobs in cold rolling complex. Measurement Criteria 1. The weight of the equipment will be as per the Net weight of the equipment mentioned by the OEM Supplier in the Invoice. 2. Temporary fabrication of structure for erection and alignment will not be part of light structure fabrication weight. 3. Fabricated pipeline <(>&<)> ducting (supplied by OEM) will be considered as tonnage of equipment. Page 5 of 8 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112424 Date 14.05.2024 Submission Date 21.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Roopesh Kumar Contact Email ROOPESH.KUMAR@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Primary HSE requirementInitial Documents required to start work: 1.HSE Plan (Approved by your Project Manager) 2. SOP (Standard Operating Procedure) of activities approved by Project Manager / HSE manager. 3.HIRA (Hazard Identification and Risk Assessment) of activities. 4.Tool and tackles- Third party inspection certificates. 5.Dedicated safety manager should depute at site with Organogram of company. 6.Communication contact details with Mobile no. /Email id. 7.List of Vehicle/Equipment/Machines with TPI and other relevant legal documents. 8.List of Available Emergency equipment on site like Fire extinguisher, First aid box, Emergency torch, Megaphone etc. 9. Mandatory PPE’s <(>&<)> Safety materials with their test certificates. 10. Scaffolding team’s (Scaffolders/Scaffold Supervisor/Scaffold Inspector) adequate certification <(>&<)> experience letter (Note-The Scaffolding team will be screened by our team to verify their competency level.) Scaffolding material must be approved <(>&<)> certified by TPI. Some Other focused requirements are as below: - 1. All workers coming at site with adequate and appropriate PPE’s. 2. Daily TBT must be done by site engineer in presence of safety person. 3. Report all Incidents and near miss and conduct Mock drill every month. 4. Take Work permit as per AMNS PTW system, and no work allowed without work permit. 5. A permit box must be available at site. 6. All new workers must be gone through safety induction by your safety person and safety induction card must be available with person at site. 7. Proper rest sheds for workers and rain cover shed for electrical equipment. 8. In case of any lifting work, No one allowed under the suspended load. 9. In case of Working at height, Valid Height pass required as per AMNS Norms. 10. Make designated assembly point on site and valid First aid box available on site. 11. Alcohol, tobacco, and smoking is strictly prohibited on site. 12. Use of mobile phone is restricted while entering in plant. 13. All electrical equipment’s must have protected with Proper earthing and ELCB/RCCB. 14. Only one team allowed at same level (parallel activity) to avoid injury from trip, fall of material to anyone. 15. Inform work planning with manpower availability to AMNS Safety team before one day in case of Sunday, Holiday. 16. Area must be barricaded during height work. 17. Make one Separate training/induction area for workers at site. 18. Only 3-Pipe type torches shall be used in Gas Cutting set. 19. Compressed Gas Cylinders must have separate yard for empty/full and as per category with 6m distance from one to another type and always tied with chain in vertical straight position. 20. Soap solution bottle must be put on compressed cylinder (DA Allowed) trolley, yard, and check before starting the work. 21. Gas Cutting set must be kept in adequate Trolley only. 22. Farana/Trailer operator/driver must wear Reflective jacket, FA Box and Fire Extinguisher always available in good condition. 23. LOTO Kit required in Energy Isolation work. 24. Daily checklist must be filled by Farana/Crane/Heavy equipment by Operator, Site Engineer and AMNS Representative before starting the work. 25. Certified First Aider must be available at site or trained your team member by Competent agency of first aid and share firs aid certificate with AMNS Safety team. 26. Safety motivational program must be done in every month for workers. Page 6 of 8 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112424 Date 14.05.2024 Submission Date 21.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Roopesh Kumar Contact Email ROOPESH.KUMAR@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details 27. Height register must be maintained at site during work. 28. During working hours one vehicle must be available at site for emergency case. 29. All Formats of Training, Safety committee meeting, Mock drill will be of AMNS. 30. Every week and month proper submission of Training records and reports. 31. Every Thursday you must submit Weekly Safety observation sheet and on Wednesday submit good practices/ Safety initiative/Improvement in site. 32. At height, Standard tool lanyard and standard tool bag must be ensured for safe handling <(>&<)> avoid falling of material/tool from height. 33. All rotating parts must be covered by safety guards. 34. Walkie talkie required is mandatory for communication during working at height. 35. Body earthing must be available in porta cabin, welding machines and other electrical equipment. 36. Follow Age of equipment Policy and Colour coding of tools and tackles as per AMNS Standard and guidelines in AMNS Checklist and submit. 37. Don’t store any diesel or fuel in stores at site. 38. Every Hot work site required individual Fire extinguisher and one Fire point (Fire buckets, Fire extinguishers C02, DPC) must be available at site. 39. Make Designated Assembly point with display at site. 40. No Chain allowed for lifting. Only Web sling or Wire rope sling is applicable for Lifting. 41. Submit TBRA before night work started and inform to AMNS safety team. (If plan) 42. Only FRP Helmets allowed at site. 43. Each worker shall be provided with Cover all/Boiler Suit. 44. Identification numbers on each Tools and tackles are compulsory on site. 45. Every 50 manpower needs 1 Safety officer present at site with megaphone. 46. Only Industrial type ladder with flat rungs is allowed in site. 47. Wheel stopper required in each vehicle. 48. Proper earthing pit (As per AMNS Electrical department) with testing details displayed on site. 49. No Smoking board displayed at required location. 50. Availability of Sufficient fire blanket. 51. Hose and cable for Gas cutting work should be of ESAB Brand. 52. Site Layout must be displayed at project site <(>&<)> Electrical Cable laying diagram must be displayed on each DB. 53. Adequate number of Emergency rescue kit should be available at site with trained rescuers. 54. Transportation means for workmen must be bus or any closed Vehicle only. Unsafe transportation is prohibited. 55. Retro reflective strips shall be pasted on each Vehicle/Equipment body. 56. Safety Officer, Electrician and Site engineer must be available at site during working hours in day/night. 57. Safety officer’s final interview will be taken by AMNS HSE representative and Safety officer must have relevant work experience and qualifications. Please find the below mandatory requirements which shall be ensured before proceeding for Height work test: - 1. The minimum age of joining of personnel for working at height is minimum 20 years and maximum 45 years. 2. The minimum qualifications of personnel are that he should be a literate (at least he can read the local or national language). 3. The minimum work experience of the personnel is 2 years. 4. He should be medically fit (The Person should be free from acrophobia, vertigo, and fits. He should be having Normal BP, Sugar <(>&<)> ECG Report) and should possess a valid Medical Fitness Page 7 of 8 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000112424 Date 14.05.2024 Submission Date 21.05.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Roopesh Kumar Contact Email ROOPESH.KUMAR@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details certificate for Work at Height Jobs from Care Hospital at ARCELORMITTAL NIPPON STEEL INDIA, Hazira Complex(CNH) before undergoing Safety Induction Training <(>&<)> Competency Assessment for Work at Height. All the Height Workers’ Medical Fitness Certificate along with Reports shall be submitted to us. After successfully completion of Competency assessment, a copy of their Induction Card <(>&<)> Height Pass shall also be submitted without any delay. Note:- The above mentioned guidelines along with other HSE requirements shall be adhered or else adequate action will be taken as per AMNS guideline (Safety Code for Contractors, HSE Contractual Penalty Guideline – AMNSIL/PS/HCPG <(>&<)> Consequence Management – AMNS/SAFE/57/SOP) General points related to Scaffolding :- 1. Prior to start any scaffolding related activity, it is mandatory to submit scaffold materials Quantity and TPI along with Safe Work Method for the same. it will help in smooth monitoring and accountability of scaffold material. 2. AMNS will consider only certified scaffold inspector after verifying his certificate, training, and knowledge. So, deploy a Scaffolding inspector with valid certification and adequate knowledge. 3. Base Plate (100 x 100 x 3 mm) is mandatory for every vertical pipe while making a scaffolding. Sole Plate shall also be used at all unpaved area to support base plate. 4. A Scaffolding platform will only be considered as fully safe after provision of all the minimum mandatory requirements/supports. 5. Provision of Access ladder, Top <(>&<)> Mid Hand railing, Toe Board and Tagging system is mandatory for each <(>&<)> every Scaffolding structure. 6. Appropriate barricades shall be installed to protect people in the vicinity during scaffold erection, use, modification, and dismantling. As far as practicable, barricades shall be provided by keeping a clear distance of 1.0 meter from scaffold structure. 7. Fall protection when erecting, dismantling, and modifying scaffolds shall be under the direction of a competent person (Scaffold Supervisor/Inspector). 8. Scaffolds shall be designed to support at least 4 times of the anticipated weight of Men/material. 9. Scaffold shall be constructed at least 2 planks wide (Minimum) at all the sides. Only Anti-skid type Planks are allowed to be used for Scaffolding structure. 10. During the erection stage of a scaffold, warning notices with the wording Scaffold incomplete, Don Not Use shall be fixed to all the scaffold access points. 11. The status board with the wording Scaffold Complete, Safe for Use shall be displayed when the scaffold is ready to use. 12. Once erected the Scaffolding shall be inspected Every week and recorded. Scaffold after due date of inspections shall not be permitted for use without Re-inspection by the Scaffolding Inspector. 13. Both Erection <(>&<)> Removal of Scaffold shall be done through Permit-To-Work. 14. Person who uses scaffold shall be trained. He shall know the safe work practices to be performed, able to assess the hazards and can take proper protective measures. 15. Any Non-standard or Damaged material shall not be used on the scaffold. Those materials shall immediately declare as scrap. 16. All the material used shall be up to the AMNS standard and shall only be used as per its designed/designated place. Any alteration shall be approved from a competent person before implying it on ground. 17. Toe board shall be fixed at the platform to restrict fall of materials/person. 18. Permit to work at height is mandatory for working on a Scaffolding platform. Also, the person working on the platform shall have valid Height Pass and Full Body Harness with them. Apart from these points all the general safe working method must be