Tender For 33423007 - Valves - Blast Furance 3421308 0004 0001 300898825 VLV,DAMPER,MULTILOUVER,2398X1048MM,MS,F Technical Details Name : Sunil Kumar Prasad Contact : Email : SUNIL.PRASAD@AMNS.IN 1 NO VALVE,DAMPER TYPE, DESIGN:MULTILOUVER , NOMINAL SIZE:2398 X 1048 MM MATERIAL, BODY:MILD STEEL , END CONNECTION TYPE:FLANGED END OPERATION:PNEUMATIC ACTUATOR , PRESSURE, OPERATING:5 BAR TEMPERATURE, WORKING:180 °C , SERVICE MEDIA:GAS ACTUATOR TYPE:DOUBLE ACTING WITH POSITION TRANSMITTER WITH POSITION FEEDBACK AND GAUGE ACCESSORIES MOUNTING CONNECTION:ONE END FORK MOUNTING AND OTHER END CLEVIS FOOT MOUNTING BRACKET OPERATING AIR PRESSURE FOR ACTUATOR:5 KG/CM2 , MANUAL OVERRIDE:REQUIRED Item Details : ADDITIONAL INFORMATION - 1. VENDOR TO SUBMIT GA DRAWING WITH DIMENSIONAL DETAILS, BOM WITH MANUFCATURING QAP FOR SITE APPROVAL AFTER PO PLACEMENT AND PRIOR TO START OF MANUFCATURING ACTION. 2. MATERIAL REQUIRED AS PER RFQ PO TEXT ONLY. 3. NO DRAWING IS AVAILABLE, HENCE VENDOR TO SEND THEIR PERSON TO THE SITE FOR DRAWING DEVELOPEMENT AND NECESSARY MEASUREMENT. 4. ALL INTERNAL INSPECTION REPORTS AND MTC, PHOTOGRAPHS TO BE SUBMITTED FOR REVIEW AND ISSUE OF DISPATCH CLEARANCE PRIOR TO PACKAGING <(>&<)> DISPATCH ACTION. 5. VENDOR SHOULD BE A REPUTED AND MUST HAVE VAST EXPERIENCE IN MANUFCATURING AND SUPPLY OF REQUIRED MATERIAL. THEY NEED TO SUBMIT CR EDENTIALS FOR OFFER EVALUATION PROCESS. CREDENTIALS MANDATORY TO SUBMIT ALONG WITH QUOTATION. 6. VENDOR TO CONFIRM PERFORMANCE AND LIFE GUARANTEE OF THE OFFERED MATERIAL IN THEIR QUOTATION. THIS IS MANDATORY TO CONFIRM IN THE QUOTATION. 7. PROPER PACKING <(>&<)> LOADING TO BE DONE DURING DISPATCH TO AVOID ANY TRANSIT DAMAGE. DELIVERY SCHEDULE - DELIVERY DATE - WITHIN 8-10 WEEKS FROM THE DATE OF RECEIPT OF APPROVED DRAWING <(>&<)> QAP DOCUMENT FROM SITE. Item Note : 2 33423007 0001 0002 300023686 VALVE,BALL,1/2INCH,2,16KG/CM2,SS,NPT F Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 50 NO VALVE,BALL, SIZE: 1/2 INCH, , NUMBER OF PORT: 2, PRESSURE RATING: 16 KG/CM2, , BODY MATERIAL: STAINLESS STEEL, SEAT MATERIAL: STAINLESS STEEL, , TRIM MATERIAL: STAINLESS STEEL, BALL MATERIAL: STAINLESS STEEL, , END CONNECTION: 1/2 INCH NPT FEMALE, OPERATION: MANUAL Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9DimensionMeasurement<(>&<)>VisualCheck100%AsperDrawing Page 2 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 3 33423007 0002 0003 300837514 VALVE,BALL,1IN,150CL,NPTF,LEVER,CS,A216 Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 25 NO VALVE, BALL TYPE: FULL BORE , TWO PIECE , SIZE: 1 INCH PRESSURE RATING: 150 CLASS , END CONNECTION: SCREWED NPT FEMALE OPERATION: MANUAL-LEVER , BODY MATERIAL: CARBON STEEL BODY MATERIAL SPECIFICATION: ASTM A216 , BODY MATERIAL GRADE: WCB TEMPERATURE RATING: 50 DEG.C , SEAT MATERIAL: PTFE BALL MATERIAL GRADE: SS304 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 3 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 4 33423007 0003 0004 300058200 VALVE,BALL,2IN,150LBS,SCRD,CS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 10 NO VALVE,BALL SIZE : 2 INCH , PRESSURE RATING : 150 LBS END CONNECTION : SCREWED , OPERATION : LEVER BODY MATERIAL : CARBON STEEL Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Page 4 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 5 33423007 0004 0005 300056876 VALVE,BALL,3IN,150LBS,FLANGED,CS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 5 NO VALVE,BALL SIZE : 3 INCH , PRESSURE RATING : 150 LBS END CONNECTION : FLANGED , OPERATION : LEVER BODY MATERIAL : CARBON STEEL , BALL MATERIAL : SS Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 5 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 6 33423007 0005 0006 300023121 VALVE,BALL,200MM,REDUCED,16KG/CM2,CS,FLG Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 2 NO VALVE,BALL,SIZE: 200 MM, TYPE OF PORT: REDUCED, PRESSURE RATING: 16 KG/ CM2, TEMPERATURE RATING: -10 TO PLUS 80 DEG.C, BODY MATERIAL: CARBON STEEL,ASTM A216,WCB, TRIM MATERIAL: PTFE, BALL MATERIAL: SS 304, END CONNECTION: FLANGED, OPERATION: GEARED, SERVICE: COMPRESSED AIR,NITROGEN, ADDITIONAL DETAIL: RAISED FACE,DRIVE SHAFT:SS,SEALING OF DRIVE SHAFT:PTFE Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 6 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 7 33423007 0006 0007 300844081 VLV,BF,40MM,PN16,CI,SS,B-STM,WFR Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 10 NO VALVE,BUTTERFLY TYPE, DESIGN:CONCENTRIC , SIZE:40 MM , PRESSURE RATING:PN16 MATERIAL, BODY:CAST IRON , MATERIAL, DISC:STAINLESS STEEL OPERATION:BARE STEM , END CONNECTION TYPE:WAFER MATERIAL, SEAT:EPDM , SERVICE MEDIA:SLURRY PERFORMANCE AND TEST CERTIFICATE:REQUIRED , LEAKAGE CLASS:CLASS VI END CONNECTION DETAILS:150 CLASS Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. Required Butterfly valve with lever operation. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Page 7 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 8 33423007 0007 0008 300907071 VLV,BF,COC,21/2INCH,PN16,CS,SS,HLVR,WFR Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 15 NO VALVE,BUTTERFLY TYPE, DESIGN:CONCENTRIC , SIZE:2 1/2 INCH , PRESSURE RATING:PN16 MATERIAL, BODY:CARBON STEEL , MATERIAL, DISC:STAINLESS STEEL OPERATION:HAND LEVER WITH NOTCH PLATE , END CONNECTION TYPE:WAFER MATERIAL, SEAT:EPDM , MATERIAL, STEM:STAINLESS STEEL SERVICE MEDIA:WATER , PERFORMANCE AND TEST CERTIFICATE:REQUIRED LEAKAGE CLASS:CLASS IV , END CONNECTION DETAILS:ANSI B 16.5 , CLASS #150 BODY MATERIAL GRADE:ASTM A216 GR WCB DISC MATERIAL GRADE:ASTM A 351 GR. CF8M , SEAT MATERIAL GRADE:SS 416 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 8 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 9 33423007 0008 0009 300908919 VLV,BF,COC,200MM,PN16,CS,SS,GEARW/HNDWHL Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 2 NO VALVE,BUTTERFLY TYPE, DESIGN:CONCENTRIC , SIZE:200 MM , PRESSURE RATING:PN16 MATERIAL, BODY:CARBON STEEL , MATERIAL, DISC:STAINLESS STEEL OPERATION:GEAR OPERATED WITH HAND WHEEL , END CONNECTION TYPE:WAFER MATERIAL, SEAT:EPDM , MATERIAL, STEM:STAINLESS STEEL SERVICE MEDIA:GAS , PERFORMANCE AND TEST CERTIFICATE:REQUIRED LEAKAGE CLASS:CLASS VI , END CONNECTION DETAILS:ANSI B 16.5 , CLASS #150 BODY MATERIAL GRADE:ASTM A216 , GR WCB DISC MATERIAL GRADE:ASTM A 351 GR. CF8M , STEM MATERIAL GRADE:SS 416 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 9 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 10 33423007 0009 0010 300881485 VLV,BF,COC,200MM,PN10,SGI,SGI,GEARW/HND Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 2 NO VALVE,BUTTERFLY TYPE, DESIGN:CONCENTRIC , SIZE:200 MM , PRESSURE RATING:PN10 MATERIAL, BODY:SG IRON , MATERIAL, DISC:SG IRON OPERATION:GEAR OPERATED WITH HAND WHEEL END CONNECTION TYPE:DOUBLE FLANGE SHORT PATTERN , MATERIAL, SEAT:NBR SERVICE MEDIA:WATER , PERFORMANCE AND TEST CERTIFICATE:REQUIRED LEAKAGE CLASS:CLASS VI , END CONNECTION DETAILS:ASME B 16.5 #150 BODY MATERIAL GRADE:EN-GJS-400-15 , DISC MATERIAL GRADE:EN-GJS-400-15 ADDITIONAL INFORMATION:STANDARD EN1563 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 10 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 11 33423007 0010 0011 300906533 VLV,BF,COC,10INCH,PN16,CS,SS,WFR Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 2 NO VALVE,BUTTERFLY TYPE, DESIGN:CONCENTRIC , SIZE:10 INCH , PRESSURE RATING:PN16 MATERIAL, BODY:CARBON STEEL , MATERIAL, DISC:STAINLESS STEEL OPERATION:GEAR OPERATED WITH HAND WHEEL , END CONNECTION TYPE:WAFER MATERIAL, SEAT:EPDM , SERVICE MEDIA:WATER PERFORMANCE AND TEST CERTIFICATE:REQUIRED , LEAKAGE CLASS:CLASS IV END CONNECTION DETAILS:WAFER SUITABLE FOR ANSI B 16.5 BODY MATERIAL GRADE:ASTM A216 , DISC MATERIAL GRADE:ASTM A 351 GR. CF8M STEM MATERIAL GRADE:SS 416 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 11 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 12 33423007 0011 0012 300881212 VLV,BF,COC,10INCH,PN10,SGI,SGI,GEARW/HN Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 2 NO VALVE,BUTTERFLY TYPE, DESIGN:CONCENTRIC , SIZE:10 INCH , PRESSURE RATING:PN10 MATERIAL, BODY:SG IRON , MATERIAL, DISC:SG IRON OPERATION:GEAR OPERATED WITH HAND WHEEL END CONNECTION TYPE:DOUBLE FLANGE SHORT PATTERN , MATERIAL, SEAT:NBR SERVICE MEDIA:WATER , PERFORMANCE AND TEST CERTIFICATE:REQUIRED LEAKAGE CLASS:CLASS VI END CONNECTION DETAILS:FLANGED ENDS SUITABLE AS PER ASME B 16.5 #150 BODY MATERIAL GRADE:EN-GJS-400-15 , DISC MATERIAL GRADE:EN-GJS-400-15 ADDITIONAL INFORMATION:STD SGI EN1563 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 12 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 13 33423007 0012 0013 300844683 VLV,BF,300MM,PN10,CST,SS,ACTR-EL,WFR Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 2 NO VALVE,BUTTERFLY TYPE, DESIGN:TRIPLE OFFSET , SIZE:300 MM , PRESSURE RATING:PN10 MATERIAL, BODY:CAST STEEL , MATERIAL, DISC:STAINLESS STEEL OPERATION:ELECTRIC ACTUATOR , END CONNECTION TYPE:WAFER TEMPERATURE, WORKING:40 °C , MATERIAL, SEAT:METAL SERVICE MEDIA:GAS , PERFORMANCE AND TEST CERTIFICATE:REQUIRED LEAKAGE CLASS:CLASS VI , ACTUATOR TYPE:MOTORISED - ON/OFF END CONNECTION DETAILS:WAFER Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 13 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 14 33423007 0013 0014 300860664 VLV,BF,DOF,300MM,PN16,CS,SS,MGR,DFLGS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 5 NO VALVE,BUTTERFLY TYPE, DESIGN:DOUBLE OFFSET , SIZE:300 MM , PRESSURE RATING:PN16 MATERIAL, BODY:CARBON STEEL , MATERIAL, DISC:STAINLESS STEEL OPERATION:MANUAL WORM GEAR END CONNECTION TYPE:DOUBLE FLANGE SHORT PATTERN TEMPERATURE, WORKING:140 °C , MATERIAL, SEAT:EPDM MATERIAL, STEM:STAINLESS STEEL , SERVICE MEDIA:WATER ROTATION:BI DIRECTIONAL , PERFORMANCE AND TEST CERTIFICATE:REQUIRED LEAKAGE CLASS:CLASS VI END CONNECTION DETAILS:FLANGED END-HOLE PCD AS PER ANSI B 16.5, CLASS 150 BODY MATERIAL GRADE:ASTM A 216 GR WCB , DISC MATERIAL GRADE:CF8M STEM MATERIAL GRADE:SS410 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 14 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 15 33423007 0014 0015 300859274 VLV,BF,COC,300MM,PN16,CS,SS,MGR,WFR Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 3 NO VALVE,BUTTERFLY TYPE, DESIGN:CONCENTRIC , SIZE:300 MM , PRESSURE RATING:PN16 MATERIAL, BODY:CARBON STEEL , MATERIAL, DISC:STAINLESS STEEL OPERATION:MANUAL WORM GEAR , END CONNECTION TYPE:WAFER MATERIAL, SEAT:EPDM , MATERIAL, STEM:STAINLESS STEEL SERVICE MEDIA:WATER , PERFORMANCE AND TEST CERTIFICATE:REQUIRED LEAKAGE CLASS:CLASS VI END CONNECTION DETAILS:SUITABLE FOR ANSI B16.5 #150 CLASS FLANGES BODY MATERIAL GRADE:ASTM A 216 GR WCB DISC MATERIAL GRADE:ASTM A 351 GR CF8M , STEM MATERIAL GRADE:AISI 410 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 15 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 16 33423007 0015 0016 300044002 VALVE,GATE,50MM,16KG/CM2,FLANGED,CS,SS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 10 NO VALVE,GATE,TYPE: FLEXI WEDGE, SIZE: 50 MM, PRESSURE RATING: 16 KG/CM2, END CONNECTION: FLANGED, OPERATION: HANDWHEEL, TEMPERATURE RATING: -10 TO 100 DEG.C, BODY MATERIAL: CARBON STEEL, STEM MATERIAL: STAINLESS STEEL, SEAT MATERIAL: STAINLESS STEEL, SERVICE: WATER, ADDITIONAL INFORMATION: FLAT FACE,WEDGE:CI Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 16 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 17 33423007 0016 0017 300044004 VALVE,GATE,80MM,16KG/CM2,FLANGED,CS,SS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 5 NO VALVE,GATE,TYPE: FLEXI WEDGE, SIZE: 80 MM, PRESSURE RATING: 16 KG/CM2, END CONNECTION: FLANGED, OPERATION: HANDWHEEL, TEMPERATURE RATING: -10 TO 100 DEG.C, BODY MATERIAL: CARBON STEEL, STEM MATERIAL: STAINLESS STEEL, SEAT MATERIAL: STAINLESS STEEL, SERVICE: WATER, ADDITIONAL INFORMATION: FLAT FACE,WEDGE:CI Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 17 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 18 33423007 0017 0018 300845095 VLV,GATE,100MM,CS,FLNG,PN16,WHL Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 3 NO VALVE,GATE SIZE:100 MM , BODY MATERIAL:CARBON STEEL , CONNECTION:FLANGED PRESSURE RATING:PN16 , OPERATING TYPE:MANUAL WHEEL OPERATED STYLE:BOLTED BONNET , BODY MATERIAL GRADE:WCB SEAT MATERIAL GRADE:SS 316 , STEM MATERIAL GRADE:SS 410 STEM DESIGN:RAISING STEM Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 18 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 19 33423007 0018 0019 300342223 VALVE,GATE,150MM,150CLS,FLANGE,MANUAL,CS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 7 NO VALVE,GATE SIZE : 150 MM , PRESSURE RATING : 150 CLASS END CONNECTION : FLANGED , OPERATION : MANUAL BODY MATERIAL : CARBON STEEL Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 19 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 20 33423007 0019 0020 300044007 VALVE,GATE,200MM,16KG/CM2,FLG,CS,A216,SS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 6 NO VALVE,GATE,TYPE: FLEXI WEDGE, SIZE: 200 MM, PRESSURE RATING: 16 KG/CM2, END CONNECTION: FLANGED, OPERATION: HANDWHEEL, TEMPERATURE RATING: -10 TO 100 DEG.C, BODY MATERIAL: CARBON STEEL,ASTM A216,GR.WCB, STEM MATERIAL: STAINLESS STEEL, SEAT MATERIAL: STAINLESS STEEL, SERVICE: WATER, ADDITIONAL INFORMATION: FLAT FACE,WEDGE:CS Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 20 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 21 33423007 0020 0021 300019920 VALVE,GATE,12INCH,150LBS,FLANGED,A 216 Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 2 NO VALVE,GATE,SIZE: 12 INCH, PRESSURE RATING: 150 LBS, END CONNECTION: FLANGED AS P ER ANSI B 16.5,RAISED FACE, PORT: FULL, OPERATION: MANUAL , BODY MATERIAL: ASTM A 216 GR. WCB, STEM MATERIAL: AISI 410, SEAT MATERI AL: ASTM A 216 GR.WCB WITH 13 PERCENTAGE CR. FACING, DISC MATERIAL: ASTM A 217 GR. CA 15 WITH 13 PERCENTAGE CR. FACING, PACKI NG MATERIAL: GRAPHITED ASBESTOS WITH SS 304 WIRE, DESIGN SPECIFICATIONS: API 600, DIMENSION STANDARD: ASME A 16.10, SERVICE: WATER Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 21 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 22 33423007 0021 0022 300859906 VLV,NR,FLAP,80MM,SS,PN16,WFR Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 10 NO VALVE,NON RETURN TYPE:FLAP , SIZE (DN):80 MM , BODY MATERIAL:STAINLESS STEEL DESIGN RATING/CLASS:PN16 , END CONNECTION TYPE:WAFER TEMPERATURE RATING:60 °C , BODY MATERIAL GRADE:SS 410 TRIM/WEDGE MATERIAL:SATINLESS STEEL , TRIM MATERIAL GRADE:SS 410 FLUID MEDIA:AIR/WATER , OPERATION:SPRING OPERATED Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 22 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 23 33423007 0022 0023 300189472 VALVE,CHECK,100MM;10KG/CM2;FLANGED;CS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 4 NO VALVE,CHECK TYPE : SPRING LOADED , SIZE : 100 MM PRESSURE RATING : 10 KG/CM2 , TEMPERATURE RATING : -10 TO 40 DEG.C END CONNECTION : FLANGED , OPERATION : AUTOMATIC BODY MATERIAL : CARBON STEEL Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 23 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 24 33423007 0023 0024 300358443 VALVE,CHECK,DUAL PLATE,200MM,10BAR,CS Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 1 NO VALVE,CHECK TYPE : DUAL PLATE , SIZE : 200 MM , PRESSURE RATING : 10 BAR END CONNECTION : FLANGE , OPERATION : MANUAL BODY MATERIAL : CARBON STEEL , BODY MATERIAL SPECIFICATION : ASTM A216 BODY MATERIAL GRADE : WCB Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 24 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 25 33423007 0024 0025 300855164 VLV,NR,DUAL,300MM,CS,150,FLNG Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 1 NO VALVE,NON RETURN TYPE:DUAL PLATE , SIZE (DN):300 MM , BODY MATERIAL:CARBON STEEL DESIGN RATING/CLASS:150 , END CONNECTION TYPE:FLANGED BODY MATERIAL GRADE:ASTM A 216 GR. WCB TRIM/WEDGE MATERIAL:SATINLESS STEEL TRIM MATERIAL GRADE:ASTM A 217 GR. CA15 , FLUID MEDIA:AIR/WATER OPERATION:AUTOMATIC , ADDITIONAL INFORMATION:WITH COUNTER FLANGES Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 25 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 26 33423007 0025 0026 300236146 VALVE,CHECK,DUAL TYPE;350 MM;FLANGED Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 1 NO VALVE,CHECK TYPE : DUAL TYPE , SIZE : 350 MM , PRESSURE RATING : CLASS-150 TEMPERATURE RATING : 10-80 DEG C , END CONNECTION : FLANGED OPERATION : SPRING LOADED , BODY MATERIAL : CARBON STEEL BODY MATERIAL SPECIFICATION : ASTM A216 , BODY MATERIAL GRADE : WCB Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory. Item Note : Page 26 of 26 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121264 Date 01.10.2024 Submission Date 08.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Mr. Nitin Dhimmer Contact Email Nitin.Dhimmer@amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 27 33423007 0026 0027 300909649 VLV,NR,DUAL,16INCH,CS,150,FLNG Technical Details Name : Retty Kurien Contact : Email : retty.kurien@amns.in 1 NO VALVE,NON RETURN TYPE:DUAL PLATE , SIZE (DN):16 INCH , BODY MATERIAL:CARBON STEEL DESIGN RATING/CLASS:150 , END CONNECTION TYPE:FLANGED END CONNECTION DETAILS:RF FLANGED ASME B16.5 CLASS 150 BODY MATERIAL GRADE:ASTM A216 GR WCB TRIM/WEDGE/DISC MATERIAL:STAINLESS STEEL TRIM/WEDGE/DISC MATERIAL GRADE:SS 316 , IBR CERTIFICATION:REQUIRED FLUID MEDIA:SLURRY , OPERATION:SPRING TYPE FACE TO FACE DIMENSION STANDARD:API 594 HINGE PIN MATERIAL, GRADE:SS 316 , ADDITIONAL INFORMATION:SPRING: SS 316 Item Details : ADDITIONAL INFORMATION GENERAL 1. If any deviation from AMNS requirement, Vendor need to mention the same in offer. TECHNICAL DATA SHEET / DOCCUEMENTATION FOR OFFER SUBMISSION 2. Valve model no against AMNS item code <(>&<)> its ref catalogue with technical data sheet need to be provided as attachment. 3. Vendor QAP need to be submitted as attachment at the time of offer submission. DOCCUMENTATION AFTER PO 4. Vendors need to be provided detailed GA drawing. 5. In case of Gear box operated valves, Gear box GA drawing need to be provided, Gear box torque , gear box gear ratio, bearing number, flange mounting, bore details need to be mentioned on gear box GA. 6. Below mentioned details need to be mentioned in GA drawing. PO NO, AMNS SAP code, PO qty, UOM, Flange drilling / threading standard, Working pressure, Pressure rating, Testing standard <(>&<)> test pressure details, MOC for all parts used in Vave with BOM, Face to face dimension with standard etc. 7. In case of NRV, spring details and Stiffness in Newton per millimeter need to be mentioned in offer. AMNS QAP REQUIREMENTS 8. Chemical <(>&<)> Mechanical properties Foundry Test certificate / Lab Test certificate need to be submitted by vendor. 9. Dimension Measurement <(>&<)> Visual Check 100 % As per Drawing inspection report need to be submitted by vendor. 10. All Final Inspection will be done on Witness By Video call, below mentioned will be considered as final inspection. 11. Hydrostatic Shell, Seat Testing Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per API 598 standard. -(Witness By Video call) 12. Functional/operation test, Measurement, Dimension <(>&<)> Visual Inspection Qty :- 100 % By Mfg. <(>&<)> 10 % By AMNS will be Checked as per Approved Drawing -(Witness By Video call) DISPATCH CLEARANCE CERTIFICATE REQUIREMENT 13. Final Documentation as per QAP which includes All Test Certificate <(>&<)> Reports, Guarantee, Warranty certificates need to be submitted for DCC, With out DCC material will not be accepted at AMNS gate <(>&<)> may result in material rejection. GUARANTEE, WARRANTY 14. The Material supplied should be guaranteed for a period of 12 months from the date of commissioning OR 18 months from the date of dispatch, whichever is earlier, for faulty material, faulty design, and bad workmanship. 15. Valves should be work under desired pressure ratings, In case of gland leakage, valve passing issues or gear box failure issues, vendor to collect the valves on FOC basis and correct the issues and return the material. 16. in case of any issues raised during Guarantee, Warranty period vendor to visit sent manufacturer service engineer the site on FOC basis <(>&<)> vendor to correct the issue on FOC basis, all service, material, manpower, transportation to <(>&<)> fro will be in vendor scope of supply on FOC basis. 17. Guarantee, Warranty is applicable on the date of valve failure reported by AMNS , As valves once installed will be removed based on plant shutdown, availability, Material Out pass date will not be considered for Guarantee, Warranty period expiry. MATERIAL DELIVERY 18. Proper Packing list, AMNS Material code for identification, SS name plate on valves mentioning valve manufacture name, valve model no, valve sr.no is compulsory