• Home
  • Tender Notice : 45725961

Tender For Admin-2000159197-Office Renovation Work At Hr Payroll 2000159197 10 10 10 CONFERENCE TABLE 31 FT2 20 SUPPLY & FIXING OF TABLE 1 NO 30 PROVIDING AND FIXING ALUMINIUM PARTITION 417 FT2 40 PROVIDING AND FIXING ALUMINIUM PARTITION 116 FT2 50 door closer 4 NO 60 P & F OF ARMSTRONG MAKE FALSE CEILING 560 FT2 70 SUPPLY AND INSTALLATION OF 2X2 LED PANEL 6 NO 80 PROV. & LAYING OF CERAMIC TILES 132 FT2 90 Supply and Fixing of Vinyl flooring 2mm 2,372 FT2 100 MOBILE TOILETS 7 NO 110 MOBILE TOILETS 1 NO 120 MOBILE TOILETS 1 NO Email : tejal.thakkar@ext.amns.in Contact : Name : Tejal Thakkar Item Details : Technical contact person. Mr. Fagna, Dharmendra - Mob- +91 9327504621 Mr. Reddy, Ananda - Mob- +91 7990166042 Mr. Rathod, Dharmendrasinh - Mob- +91 9879103363 OFFICE RENOVATION WORK AT HR PAYROLL OFFICE Scope of Work- Vendor: - a. Area of work will be at HR Payroll office and vendor has to extend the support by executing the job as instructed by In-charge / Head Administration. b. All Consumable with required spares items will be under the scope of the vendor. c. Disposal of Scrap after work will be vendor scope at location informed by the AMNS. d. The contractor must provide a 3-year warranty for all wooden flooring, ceilings, paint, doors, LED lights and furniture. e. All materials must be approved by AM/NS Incharge before use at the site. The contractor is responsible for arranging and covering the costs of any necessary material testing. f. Experienced supervisor with relevant expertise must be assigned to oversee the repair work. g. Permit to Work‟ (PTW) system must be followed by the Contractors personnel where required within AMNS premises. h. Contractor shall ensure all his staff are aware of Company safety and fire regulations whilst on Company premises. i. Accommodation, transportation to and from work site, and medical/insurance shall be borne by contractor for his personnel. j. The contractor shall supply their manpower with Personal Protective Equipment, consisting of, but not limited to the following: - k. Safety boots/shoes l. Safety helmet m. Safety glasses n. Hearing protectors o. Hand gloves p. Any other special safety equipment shall be supplied by AMNS. q. Although each person will be being given the safety induction and will be familiar with the AMNS Safety Regulations, this will not deduct from the responsibilities of the chosen contractor to the termination of that manpower. The contractor shall make replacement of persons at no additional cost to AMNS. r. Performance of the contractor shall be monitored continuously to ensure they meet acceptable standards of service. If AMNS is not satisfied with the contractors work the contract shall be terminated, at no additional cost to AMNS. s. Contractor shall be deemed to have full working knowledge and have obtained all necessary information and data of Company Facilities at which Services are to be performed, including, where applicable, prevailing location, physical conditions, hygienic state, access, contingencies, and all other circumstances under which the Services shall be performed. Services t. Contractor vehicles entering AMNS site shall be well maintained and should be as per AMNS Safety Standards and shall be inspected by Company designated representative. Page 2 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121878 Date 11.10.2024 Submission Date 18.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Pinky Raval Contact Email Pinky.CRaval@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details u. The contractor shall ensure that his work force is covered under the required insurance as per government rules and regulations. v. The contractors shall prepare the security gate passes for their personnel and furnish all information requested by pass issuing authority. w. Other terms and conditions shall be as per AMNS rules and regulations. x. No Pedestrian/Cycles/Two Wheelers movement will be allowed inside the Plant Premises. y. Vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. Vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. The movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. Scope of Work- AMNSI: - a. Site supervision, quality of work & cleaning to be check by area in charge. If quality of work not up to mark area in charge can stop service Immediately Specific Penalty for nonperformance by vendor and must be cardinally measured: Yes. Delays will attract penalty of 5000/instance or Daily. Description Conference Table (Size: 2400W x 1200D x 750H) Edge of table is 36mm thick. Material: Semi marine ply (Brand: Century/Green ply or Equivalent) Laminates: 1mm thick Greenlam/Timex or Equivalent 2mm thick PVC edge bidding. Furnace shaped understructure. Unit FT2 QTY 31 Description Pantry Table (Size: 1200W x 750D x 900H) Material: Completely made of 20G CRCA sheets as per IS 277 standard. Table Top: Made of (18 to 20mm) thick Jet Black Granite Top with Edge molding at the front & grove at the bottom to avoid by chemical spillage. Pedestal Frame: Made in CRCA 1.6 mm Thick Square Tube & 30mm X 30mm X 1.6mm Thick MS Angle. With Height Adjustable Lever bolt. Unit NO QTY 1 Description Aluminum Partition Work Providing & fixing Anodized Aluminum Partly glass & partly paneled partition using medium duty section of National make. Section - 63MM X 38MM (16 GUAGE) Unit FT2 QTY 417 Description Aluminum Door Section - 85MM X 50MM (16 GUAGE) Unit FT2 QTY 116 Description Door Closer (Brand: Ozone make) Unit NO QTY 4 Description False Ceiling Material : Metallic False ceiling Brand: Armstrong make Unit Page 3 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121878 Date 11.10.2024 Submission Date 18.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Pinky Raval Contact Email Pinky.CRaval@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details FT2 QTY 560 Description LED CEILING SQUARE LIGHT (2X2) Make: Panasonic Unit NO QTY 6 Description Replacement of tiles with Vitrified Tiles for Conference Room Brand: Kjaria make Unit FT2 QTY 132 Description PVC vinyl flooring (2mm thick) Unit FT2 QTY 2372 Description Mobile Shelving System Specification: Material: Completely Made Of CRCA Sheets As Per IS 277 Standards. VERTICAL, REAR AND BACK PANEL : 21 Swg (POWDER COATED) SHELVES: 21 Swg For 100 KG UDL (POWDER COATED) CENTRE SHEET : 22 Swg (Powder Coated) Base Frame : 12 Swg ( Powder Coated) Rail Track : 2 Track System (1) DFMU- DOUBLE FACED MOBILE UNIT WITH 6 COMPARTMENT (3 BAY) 2800W X 600D X 2600H Unit NO QTY 7 Description (2) SFMU- Single Faced Mobile Unit With 6 Compartment (3 Bay) 2800w X 450d X 2600h Unit NO QTY 1 Description (3) SFFU -Single Faced Fixed Unit With 6 Compartment (3 Bay) 2800w X 450d X 2600h Unit NO QTY

Tender Notice

45725961

Arcelor Mittal Nippon Steel India Limited

Indian

Hazira

Gujarat

October 18, 2024

Key Value

Ref. Documents

Ref. Documents

Ref. Documents

To Download Tender Document Click on the below link

Tender For Admin-2000159197-Office Renovation Work At Hr Payroll 2000159197 10 10 10 CONFERENCE TABLE 31 FT2 20 SUPPLY & FIXING OF TABLE 1 NO 30 PROVIDING AND FIXING ALUMINIUM PARTITION 417 FT2 40 PROVIDING AND FIXING ALUMINIUM PARTITION 116 FT2 50 door closer 4 NO 60 P & F OF ARMSTRONG MAKE FALSE CEILING 560 FT2 70 SUPPLY AND INSTALLATION OF 2X2 LED PANEL 6 NO 80 PROV. & LAYING OF CERAMIC TILES 132 FT2 90 Supply and Fixing of Vinyl flooring 2mm 2,372 FT2 100 MOBILE TOILETS 7 NO 110 MOBILE TOILETS 1 NO 120 MOBILE TOILETS 1 NO Email : tejal.thakkar@ext.amns.in Contact : Name : Tejal Thakkar Item Details : Technical contact person. Mr. Fagna, Dharmendra - Mob- +91 9327504621 Mr. Reddy, Ananda - Mob- +91 7990166042 Mr. Rathod, Dharmendrasinh - Mob- +91 9879103363 OFFICE RENOVATION WORK AT HR PAYROLL OFFICE Scope of Work- Vendor: - a. Area of work will be at HR Payroll office and vendor has to extend the support by executing the job as instructed by In-charge / Head Administration. b. All Consumable with required spares items will be under the scope of the vendor. c. Disposal of Scrap after work will be vendor scope at location informed by the AMNS. d. The contractor must provide a 3-year warranty for all wooden flooring, ceilings, paint, doors, LED lights and furniture. e. All materials must be approved by AM/NS Incharge before use at the site. The contractor is responsible for arranging and covering the costs of any necessary material testing. f. Experienced supervisor with relevant expertise must be assigned to oversee the repair work. g. Permit to Work‟ (PTW) system must be followed by the Contractors personnel where required within AMNS premises. h. Contractor shall ensure all his staff are aware of Company safety and fire regulations whilst on Company premises. i. Accommodation, transportation to and from work site, and medical/insurance shall be borne by contractor for his personnel. j. The contractor shall supply their manpower with Personal Protective Equipment, consisting of, but not limited to the following: - k. Safety boots/shoes l. Safety helmet m. Safety glasses n. Hearing protectors o. Hand gloves p. Any other special safety equipment shall be supplied by AMNS. q. Although each person will be being given the safety induction and will be familiar with the AMNS Safety Regulations, this will not deduct from the responsibilities of the chosen contractor to the termination of that manpower. The contractor shall make replacement of persons at no additional cost to AMNS. r. Performance of the contractor shall be monitored continuously to ensure they meet acceptable standards of service. If AMNS is not satisfied with the contractors work the contract shall be terminated, at no additional cost to AMNS. s. Contractor shall be deemed to have full working knowledge and have obtained all necessary information and data of Company Facilities at which Services are to be performed, including, where applicable, prevailing location, physical conditions, hygienic state, access, contingencies, and all other circumstances under which the Services shall be performed. Services t. Contractor vehicles entering AMNS site shall be well maintained and should be as per AMNS Safety Standards and shall be inspected by Company designated representative. Page 2 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121878 Date 11.10.2024 Submission Date 18.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Pinky Raval Contact Email Pinky.CRaval@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details u. The contractor shall ensure that his work force is covered under the required insurance as per government rules and regulations. v. The contractors shall prepare the security gate passes for their personnel and furnish all information requested by pass issuing authority. w. Other terms and conditions shall be as per AMNS rules and regulations. x. No Pedestrian/Cycles/Two Wheelers movement will be allowed inside the Plant Premises. y. Vendor must ensure availability of sufficient buses/vehicles to ply their associates inside plant premises. Vendors to ensure safe transportation of their associates from their place of residence to respective work location in the plant and back. The movement of persons inside the plant by foot/bicycle/two wheelers is prohibited. Scope of Work- AMNSI: - a. Site supervision, quality of work & cleaning to be check by area in charge. If quality of work not up to mark area in charge can stop service Immediately Specific Penalty for nonperformance by vendor and must be cardinally measured: Yes. Delays will attract penalty of 5000/instance or Daily. Description Conference Table (Size: 2400W x 1200D x 750H) Edge of table is 36mm thick. Material: Semi marine ply (Brand: Century/Green ply or Equivalent) Laminates: 1mm thick Greenlam/Timex or Equivalent 2mm thick PVC edge bidding. Furnace shaped understructure. Unit FT2 QTY 31 Description Pantry Table (Size: 1200W x 750D x 900H) Material: Completely made of 20G CRCA sheets as per IS 277 standard. Table Top: Made of (18 to 20mm) thick Jet Black Granite Top with Edge molding at the front & grove at the bottom to avoid by chemical spillage. Pedestal Frame: Made in CRCA 1.6 mm Thick Square Tube & 30mm X 30mm X 1.6mm Thick MS Angle. With Height Adjustable Lever bolt. Unit NO QTY 1 Description Aluminum Partition Work Providing & fixing Anodized Aluminum Partly glass & partly paneled partition using medium duty section of National make. Section - 63MM X 38MM (16 GUAGE) Unit FT2 QTY 417 Description Aluminum Door Section - 85MM X 50MM (16 GUAGE) Unit FT2 QTY 116 Description Door Closer (Brand: Ozone make) Unit NO QTY 4 Description False Ceiling Material : Metallic False ceiling Brand: Armstrong make Unit Page 3 of 3 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000121878 Date 11.10.2024 Submission Date 18.10.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ null Pinky Raval Contact Email Pinky.CRaval@ext.amns.in MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details FT2 QTY 560 Description LED CEILING SQUARE LIGHT (2X2) Make: Panasonic Unit NO QTY 6 Description Replacement of tiles with Vitrified Tiles for Conference Room Brand: Kjaria make Unit FT2 QTY 132 Description PVC vinyl flooring (2mm thick) Unit FT2 QTY 2372 Description Mobile Shelving System Specification: Material: Completely Made Of CRCA Sheets As Per IS 277 Standards. VERTICAL, REAR AND BACK PANEL : 21 Swg (POWDER COATED) SHELVES: 21 Swg For 100 KG UDL (POWDER COATED) CENTRE SHEET : 22 Swg (Powder Coated) Base Frame : 12 Swg ( Powder Coated) Rail Track : 2 Track System (1) DFMU- DOUBLE FACED MOBILE UNIT WITH 6 COMPARTMENT (3 BAY) 2800W X 600D X 2600H Unit NO QTY 7 Description (2) SFMU- Single Faced Mobile Unit With 6 Compartment (3 Bay) 2800w X 450d X 2600h Unit NO QTY 1 Description (3) SFFU -Single Faced Fixed Unit With 6 Compartment (3 Bay) 2800w X 450d X 2600h Unit NO QTY