• Home
  • Tender Notice : 45833425

Providing Fire Safety Equipment In Iti Building At.Vagdod, Dist.Patan-1 176.00 Supply, Installation, Testing & Commissioning of MS pipe (IS:1239) class C including cutting, screwing, welding , necessary fittings i.e. bends, elbows reducers, clamps, hangers, supports, flanges, dead flange all G.I nut bolt as required etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade complete in all respects. 100 mm dia 2 4.00 Providing and erecting BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. (D) 100 mm 3 1.00 Supply, Installation, Testing & Commissioning of Stainless steel Fire Brigade connection (Suction collecting head) consisting of 2 nos. 63 mm dia instantaneous type male coupling with built-in check valves and 150 mm dia. flanged outlet complete with bolts, nuts and rubber insertions as required as per IS:904-1983 with butter fly valve and Non- Return Valve. 4 3.00 Supply, Installation, Testing & Commissioning of First-Aid Fire Hose Reel wall mounting swinging type complete with drum, bracket, 25 mm dia. Ball valve and 20 mm dia. x 36.5 M long high pressure Hose Reel tubing as per IS:444 with stainless steel shut-off nozzle having 5mm dia. orifice. The Hose Reel shall strictly confirm to IS;884-1985 with piping. 5 1.00 Supply, installation, testing & commissioning of air vent valves (PN10) of following sizes along with ball valve. (A) 15 mm 6 1.00 Providing and erecting NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. 100 mm dia 7 96.00 Supply, fabrication and installation of MS support as per required for support of pipe and Other Accessories 8 176.00 Applying priming coat over new steel and other metal surface after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 9 176.00 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter. 10 6.00 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. [A] For 4.5 Kg Capacity 11 6.00 Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x mm M S Flat with nuts and bolts grouted in wall complete. [A] For 4.5 Kg Capacity 12 1.00 Supplying, fixing, testing and commissioning electrically driven Fire Pump, suitable automatic operation consisting of the following:Horizontally mounted, end suction type centrifugal fire pump having C.I. body, bronze impeller and S.S. Shaft with Gland packing, capable for delivering 450 LPM at 35 Mtrs with accessories such as standard coupling guard, relief valve etc. 13 1.00 Supplying, installing ,testing and commissioning Pressure switches of suitable range for pump sets with Ball valves, Fittings like unions / colors reducers etc. 14 1.00 Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required 15 8.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority CO2 extinguisher size signages shall be :8x16. 16 8.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority DCP extinguisher size signages shall be : 8x16. 17 10.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Fire Exit size of signages shall be : 5x12. 18 10.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Arrow Signages size signages shall be : 4x12. 19 4.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Fire hose reel size signages shall be :4x12. 20 1.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Exit plan for each building (A3 size) - with proper frame. 21 1.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Assembly points size of signages shall be : 3 x 2 . 22 5,000.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection etc. complete on terrace 23 1.00 Obtaining Fire NOC of the building after installation of fire system which includes preparing detailed plan of the building and detailed drawings of building by taking all necessary measurement, data and technical details/ drawings required for fire NOC, including signing of 1 year AMC contract with user department as per direction and instruction of Engineer in charge. 24 100.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 25 4.00 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth 26 3.40 Providing and laying Ordinary cement concrete M.250 and curing complete including the cost of form work but excluding cost of reinforcement for reinforced concrete work in [A] Foundations, Footings, Base of columns and Mass concrete 27 14.20 Providing and laying Ordinary cement concrete M.200 and finishing smooth with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (F) Copping / Wall Cap 28 3.30 Providing and laying Ordinary cement concrete M.200 with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (H) Slab 29 21.10 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional 30 1,250.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level for All Floor. 31 26.00 Providing 10mm thick cement plaster in single coat on Brick / Concrete walls etc. for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 32 62.00 Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- coarse sand ) finishing with flush pointing in white cement. 33 2.00 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. 34 15.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(i) 50mm dia 35 2.00 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 40mm / 50mm dia. 36 1.00 Supply, installation, testing and commissioning of Fire pump control panel Panel(IP54) having construction of the main pumps (Electric driven pumps ), including MCB/MCCB, Starter for all pumps, push button switches, MFM, various fault indicators. this shall be complete as per require IS code. 37 140.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (E) 3 core 16 Sq. mm 38 80.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 4 core 10 Sq. mm 39 1.00 SITC of 6 Zone manual fire alarm control panel made out of MS sheet to accommodate the following items duly stove enameled painted in approved colours with louvers for ventilation’s locking arrangement. etc. complete as reqd. 40 6.00 SITC of Hooter (power:9-30v,DC power:90 db,dimension:115*75*115mm recorded voice timing:20 second, weight:380gm. 41 6.00 SITC of ALARAM SYSTEM- MCB, (dimension 85*85*50 mm, operating temperature-+10’-80 degree C, product FIRE ALARM SYSTEM. 42 45.00 SITC of Optical Smoke Detector with base - 4 wire connection with NC - relay output 1 2 3 43 1,980.00 Supplying & laying of 2x1.5 sqmm fire alarm armored cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armoring & FRLS outer sheath complete as required.

Tender Notice

45833425

Road And Building Department

Indian

Patan

Gujarat

November 06, 2024

Key Value

15.31 Lakhs

15.31 Lakhs

15.31 Lakhs

To Download Tender Document Click on the below link

Providing Fire Safety Equipment In Iti Building At.Vagdod, Dist.Patan-1 176.00 Supply, Installation, Testing & Commissioning of MS pipe (IS:1239) class C including cutting, screwing, welding , necessary fittings i.e. bends, elbows reducers, clamps, hangers, supports, flanges, dead flange all G.I nut bolt as required etc. including cutting holes in brick or RCC walls/slabs and making good the same complete including painting with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade complete in all respects. 100 mm dia 2 4.00 Providing and erecting BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O - ring & PN 16 pressure rating as specified. (D) 100 mm 3 1.00 Supply, Installation, Testing & Commissioning of Stainless steel Fire Brigade connection (Suction collecting head) consisting of 2 nos. 63 mm dia instantaneous type male coupling with built-in check valves and 150 mm dia. flanged outlet complete with bolts, nuts and rubber insertions as required as per IS:904-1983 with butter fly valve and Non- Return Valve. 4 3.00 Supply, Installation, Testing & Commissioning of First-Aid Fire Hose Reel wall mounting swinging type complete with drum, bracket, 25 mm dia. Ball valve and 20 mm dia. x 36.5 M long high pressure Hose Reel tubing as per IS:444 with stainless steel shut-off nozzle having 5mm dia. orifice. The Hose Reel shall strictly confirm to IS;884-1985 with piping. 5 1.00 Supply, installation, testing & commissioning of air vent valves (PN10) of following sizes along with ball valve. (A) 15 mm 6 1.00 Providing and erecting NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as specified. 100 mm dia 7 96.00 Supply, fabrication and installation of MS support as per required for support of pipe and Other Accessories 8 176.00 Applying priming coat over new steel and other metal surface after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming paint brushing red lead. 9 176.00 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including cleaning the surface an even shade including cleaning the surface of all dirt, dust and other foreign matter. 10 6.00 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. [A] For 4.5 Kg Capacity 11 6.00 Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x mm M S Flat with nuts and bolts grouted in wall complete. [A] For 4.5 Kg Capacity 12 1.00 Supplying, fixing, testing and commissioning electrically driven Fire Pump, suitable automatic operation consisting of the following:Horizontally mounted, end suction type centrifugal fire pump having C.I. body, bronze impeller and S.S. Shaft with Gland packing, capable for delivering 450 LPM at 35 Mtrs with accessories such as standard coupling guard, relief valve etc. 13 1.00 Supplying, installing ,testing and commissioning Pressure switches of suitable range for pump sets with Ball valves, Fittings like unions / colors reducers etc. 14 1.00 Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required 15 8.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority CO2 extinguisher size signages shall be :8x16. 16 8.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority DCP extinguisher size signages shall be : 8x16. 17 10.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Fire Exit size of signages shall be : 5x12. 18 10.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Arrow Signages size signages shall be : 4x12. 19 4.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Fire hose reel size signages shall be :4x12. 20 1.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Exit plan for each building (A3 size) - with proper frame. 21 1.00 Supply and installation of auto glow reflective film signages for building at placed required by code and competent authority Assembly points size of signages shall be : 3 x 2 . 22 5,000.00 Providing erecting and fixing double coated ISI water tank of required capacity each with all necessary fittings and connection etc. complete on terrace 23 1.00 Obtaining Fire NOC of the building after installation of fire system which includes preparing detailed plan of the building and detailed drawings of building by taking all necessary measurement, data and technical details/ drawings required for fire NOC, including signing of 1 year AMC contract with user department as per direction and instruction of Engineer in charge. 24 100.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 25 4.00 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth 26 3.40 Providing and laying Ordinary cement concrete M.250 and curing complete including the cost of form work but excluding cost of reinforcement for reinforced concrete work in [A] Foundations, Footings, Base of columns and Mass concrete 27 14.20 Providing and laying Ordinary cement concrete M.200 and finishing smooth with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (F) Copping / Wall Cap 28 3.30 Providing and laying Ordinary cement concrete M.200 with curing etc complete, including the cost of formwork but excluding the cost of reinforcement for R.C.C. work in (H) Slab 29 21.10 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional 30 1,250.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level for All Floor. 31 26.00 Providing 10mm thick cement plaster in single coat on Brick / Concrete walls etc. for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) 32 62.00 Providing and laying white glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- coarse sand ) finishing with flush pointing in white cement. 33 2.00 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg. 34 15.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(i) 50mm dia 35 2.00 Providing and fixing Gun metal check or non-return full way wheel valve.(D) 40mm / 50mm dia. 36 1.00 Supply, installation, testing and commissioning of Fire pump control panel Panel(IP54) having construction of the main pumps (Electric driven pumps ), including MCB/MCCB, Starter for all pumps, push button switches, MFM, various fault indicators. this shall be complete as per require IS code. 37 140.00 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (E) 3 core 16 Sq. mm 38 80.00 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (C) 4 core 10 Sq. mm 39 1.00 SITC of 6 Zone manual fire alarm control panel made out of MS sheet to accommodate the following items duly stove enameled painted in approved colours with louvers for ventilation’s locking arrangement. etc. complete as reqd. 40 6.00 SITC of Hooter (power:9-30v,DC power:90 db,dimension:115*75*115mm recorded voice timing:20 second, weight:380gm. 41 6.00 SITC of ALARAM SYSTEM- MCB, (dimension 85*85*50 mm, operating temperature-+10’-80 degree C, product FIRE ALARM SYSTEM. 42 45.00 SITC of Optical Smoke Detector with base - 4 wire connection with NC - relay output 1 2 3 43 1,980.00 Supplying & laying of 2x1.5 sqmm fire alarm armored cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armoring & FRLS outer sheath complete as required.