• Home
  • Tender Notice : 46102653

Tender For Pr:28037049_Bf-2 Lab Equipments_Qa/Qc 28037049 0001 0001 300853805 OVEN,HOT-AIR,MN:SI_HAO_45,0-300°C,4 Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO OVEN,HOT-AIR TYPE:ELECTRIC DRYING , WORKING TEMPERATURE:0-300 °C NO OF TRAYS:4 , RATED POWER:8 KW CHAMBER SIZE:914X 914 X 1524 MM CONTROL PANEL DETAILS:PID ,DIGITAL TEMPERATURE CONTROLLER ADDITIONAL INFORMATION:CAPACITY = 216 LTR , MAKE MODEL/BRAND:SI_HAO_45 MAKE NAME:SALVIN Item Details : EQUIPMENT: OVEN BIG MAT CODE: 300853805 Technical Specification: 1 Programmable PID Digital temperature controller with Dual display to indicate set <(>&<)> process temperature. 2. Temperature Accuracy: +/- 0.5- or 1-degree C 3.Temp. Resolution:0.1 Degree C 4 Heating Element is made from ISI certified Brand material. 5 Air circulation: Provision for preheating of the inlet air required. 6 Temperature controls: As per IS 1350 or ISO 3088. 7 Construction: Interior and Exterior with SS 304. 8 Inbuilt Safety fuse for controller. 9 All heat affected parts are painted with heat resistant paint. 10 Alarm system to indicate deviations in Temperature. 11 Insulated doors with sturdy latch require (Double Doors required) 12 Certification: Provided with factory Calibrated Certificate for the Temperature Controller/Thermocouple need to compliance ISO/IEC 17025. 13 Data logger with built-in storage <(>&<)> USB Port facility to transfer stored data from data logger to pen drive system. 14 Ventilation provision (Chimney) required on the Top. 15 Oven Capacity consider as per chamber size dimension. 16 Spares required for 2 years operation. Item Note : 2 28037049 0002 0002 300903632 OVEN,HOT-AIR,0-300°C,03 Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO OVEN,HOT-AIR TYPE:HOT AIR , WORKING TEMPERATURE:0-300 °C , NO OF TRAYS:03 RATED POWER:230 KW , CHAMBER SIZE:610 X 610 X 915 -W X D X H MM CONTROL PANEL DETAILS:PROGRAMMABLE PID DIGITAL TEMPERATURE CONTROLLER ADDITIONAL INFORMATION:INTERIOR WITH SS 304 AND EXTERIOR STEEL WITH POWDER COATED FINISH SS 304 PERFORATED TRAYS Item Details : EQUIPMENT: OVEN MEDIUM MAT CODE: 300903632 Technical Specification: 1 Programmable PID Digital temperature controller with Dual display to indicate set <(>&<)> process temperature. 2. Temperature Accuracy: +/- 0.5- or 1-degree C 3.Temp. Resolution:0.1 Degree C 4 Heating Element is made from ISI certified Brand material. 5 Air circulation: Provision for preheating of the inlet air required. 6 Temperature controls: As per IS 1350 or ISO 3088. 7 Construction: Interior and Exterior with SS 304. 8 Inbuilt Safety fuse for controller. 9 All heat affected parts are painted with heat resistant paint. 10 Alarm system to indicate deviations in Temperature. 11 Insulated doors with sturdy latch require. 12 Certification: Provided with factory Calibrated Certificate for the Temperature Controller/Thermocouple need to compliance ISO/IEC 17025. 13 Data logger with built-in storage <(>&<)> USB Port facility to transfer stored data from data logger to pen drive system. 14 Ventilation provision (Chimney) required on the Top. 15 Spares required for 2 years operation. Item Note : Page 2 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 3 28037049 0003 0003 300180459 OVEN,HOT AIR,2000W,0-300DEG.C,165L Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO OVEN TYPE : HOT AIR , ELECTRICAL RATING : 2000 W TEMPERATURE RATING : 0-300 DEG.C , CAPACITY : 165 L Item Details : EQUIPMENT: OVEN SMALL MAT CODE: 300180459 Technical Specification: 1 Programmable PID Digital temperature controller with Dual display to indicate set <(>&<)> process temperature. 2. Temperature Accuracy: +/- 0.5- or 1-degree C 3.Temp. Resolution:0.1 Degree C 4 Heating Element is made from ISI certified Brand material. 5 Air circulation: Provision for preheating of the inlet air required. 6 Temperature controls: As per IS 1350 or ISO 3088. 7 Construction: Interior and Exterior with SS 304. 8 Inbuilt Safety fuse for controller. 9 All heat affected parts are painted with heat resistant paint. 10 Alarm system to indicate deviations in Temperature. 11 Insulated doors with sturdy latch require. 12 Certification: Provided with factory Calibrated Certificate for the Temperature Controller/Thermocouple need to compliance ISO/IEC 17025. 13 Data logger with built-in storage <(>&<)> USB Port facility to transfer stored data from data logger to pen drive system. 14 Ventilation provision (Chimney) required on the Top. 15 Spares required for 2 years operation. Item Note : 4 28037049 0004 0004 300160060 CRUSHER,JAW,450X1120X840MM;100MM;80KG/HR Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO CRUSHER,JAW JAW CRUSHER SIZE: 450X1120X840 MM , FEED SIZE: 100 MM CAPACITY: 80 KG/HR , NO OF PASSES: 2/3 , DRIVER: MOTORIZED DRIVER CAPACITY: 2 HP Item Details : Specification of Jaw Crusher: Mat. Code -300160060 (100 mm) 1 Iron Bearing, Limestone, Dolomite <(>&<)> Quartz Sample crushing. 2 Product size 1st pass - <(><<)>30 mm to 12.5 mm 3 Product size 2nd pass - <(><<)> 3 mm 4 Safety features requires while material clogging due to sudden material dumping. 5 All moveable parts of equipment cover with Pully Guard. 6 spares required for 2 years equipment operation. 7 Installation <(>&<)> commissioning is in vendor scope. Item Note : 5 28037049 0005 0005 300904189 JAW-CRUSHER,LAB,150-10MM,UPTO150MM,5.5KW Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO JAW-CRUSHER,LABORATORY GAP ADJUSTMENT:150-10 MM , FEED SIZE:UPTO 150 MM RATED POWER:5.5 KW , OUTPUT SIZE - 2ND PASS:20 -10 MM MOUNTING TYPE:FLOOR , WORKING PRINCIPLE:IMPACT RATED VOLTAGE:440 VAC ADDITIONAL INFORMATION:HARDNESS STEEL + JAW BLADE SET OUTPUT SIZE - 1ST PASS:150-10 MM Item Details : Specification of Jaw Crusher: Mat. Code - 300904189 1 Iron Bearing, Coke <(>&<)> coal Sample crushing. 2 Safety features requires while material clogging due to sudden material dumping. 3 All moveable parts of equipment cover with Pully Guard. 4 spares required for 2 years equipment operation. 5 Installation <(>&<)> commissioning is in vendor scope Item Note : Page 3 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 6 28037049 0006 0006 300896599 DRUM,LAB,TUMBLER,1:60,2200W,415V Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO DRUM,LABORATORY TYPE:TUMBLER , GEAR RATIO:1 : 60 , POWER RATING:2200 W VOLTAGE RATING:415 V , ADDITIONAL INFORMATION:IS-6495:1994 & ISO :3271 Item Details : Specifications for Tumble Drum Following are the specifications for the Tumble Drum, It is use for measure for evaluating the resistance of Iron ores <(>&<)> Sinter to size degradation by impact and abrasion. It covers the determination of the Tumble and abrasion indices at BF2 QAQC Laboratory. Sr.No Parameter Requirement as per IS-6495 <(>&<)> ISO-3271 1 MOC Suitable steel grade 2 Drum Plate thickness Side portion of 10 mm and 6 mm for periphery 3 Size of Drum 500 (W) x 1000 (L) mm (Confirming as per above standard) 4 Lifters Two equally spaced L-shaped steel lifters 50 mm flat × 50 mm high × 5 mm thick and 500 mm long inside the drum by welding. 5 Shaft Suitable graded hardened steel 6 Drum rotation speed of 25 r/min ± 1 r/min and stops within one revolution. The equipment shall be fitted with a revolution counter and with an automatic device for stopping the drum after a predetermined number of revolutions. 7 Height of Drum axis 700 mm 8 Test sieves square apertures of the following nominal sizes: 6,30 mm and 500 m. 9 Tray Required for sample empty out after testing, Dimension as per required. 10 Programmer PLC/Microprocessor based 11 Control Panel Consists of: Time control, RPM Control with proper switches and accessories 12 Others Branded suppliers with previous history of supply to major Industries <(>&<)> User list to be shared with us during submission of quote. 13 Safety All moveable parts cover with safety guards. 14 G.A.Drawing Require. Item Note : 7 28037049 0009 0007 300904402 SPLITTER,SMPL,RIFFLE,16MM,10KG,4 Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO SPLITTER,SAMPLE TYPE:RIFFLE , FEED SIZE:16 MM , HOPPER CAPACITY:10 KG NO OF OUTPUT VOLUME DIVISION:4 ADDITIONAL INFORMATION:SS 50MM SLOT WITH SCOOP AND COLLECTION BOX, STD. METHD. FOR REDUCING SAMPL.OF AGGREGATE TO TESTING SIZE. Item Details : Item Note : 8 28037049 0010 0008 300904782 SPLITTER,SMPL,RIFFLE,10MM,5KG,4 Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO SPLITTER,SAMPLE TYPE:RIFFLE , FEED SIZE:10 MM , HOPPER CAPACITY:5 KG NO OF OUTPUT VOLUME DIVISION:4 ADDITIONAL INFORMATION:SS 30MM SLOT WITH SCOOP AND COLLECTION BOX, STD. METHD. FOR REDUCING SAMPL.OF AGGREGATE TO TESTING SIZE. Item Details : Item Note : Page 4 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 9 28037049 0012 0009 300129172 ELMNT,HEATING,F/MUFFLE FURNACE,KUMAR Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO ELEMENT TYPE : HEATING , MAJOR EQUIPMENT : MUFFLE FURNACE MAJOR EQUIPMENT MAKE : KUMAR , ADDITIONAL INFORMATION : WITH MUFFLE Item Details : Muffle Furnace-300129172 INNER WORKING DIMENSION: 9 x 9 x 18 (W X H X D) WATTAGE: 7-9.0 PROGRAMMABLE PID DIGITAL TEMPERATURE CONTROLLER WITH DUAL DISPLAY TO INDICATE SET <(>&<)> PROCESS TEMPERATURE. TEMPERATURE RANGE: 200 DEGREE C TO 1200 DEGREE C. TEMPERATURE ACCURACY: +/- 0.5- OR 1-DEGREE C. TEMPERATURE RESOLUTION: 0.1 DEGREE C. TEMPERATURE CONTROL: AS PER IS 1350 OR ISO 3088. CONSTRUCTION: EXTERNAL BODY WITH HEAVY REINFORCED STEEL WITH POWDER COATED FINISH. INBUILT SAFETY FUSE FOR CONTROLLER. KANTHAL HEATING ELEMENT COIL. MUFFLE OF SUPERIOR QUALITY HEAT TREATED REFRACTORY. ALARM SYSTEM TO INDICATE DEVIATION IN TEMPERATURE. INSULATED DOORS WITH STURDY LATCH. SPARES REQUIRED FOR 2 YEARS OF OPERATION. SAFETY TONGS FOR SAMPLE PICKING. CERTIFICATION: PROVIDED WITH FACTORY CALIBRATED CERTIFACTE OF THE THERMOCOUPLE WITH COMPLIANCE OF ISO/IEC 17025. Item Note : 10 28037049 0013 0010 300152271 MUFFLE FURNACE WITH SOLID STATE ELEC.DIG Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 4 NO FURNACE TYPE : MUFFLE ADDITIONAL INFORMATION : WITH SOLID STATE ELEC.DIG ,PROPORTIONAL CONTROLLER CAT NO:KI 25A-03 #### MUFFLE FURNACE WITH SOLID STATE ELEC.DIG ### DISPLY PROPORTIONAL CONTROLLER CAT NO:KI 25A-03 Item Details : EQUIPMENT: MUFFLE FURNACE-300152271 TS: INNER WORKING DIMENSION: 6x 6 x 12 (W X H X D) WATTAGE: 3.0-5.0 KW PROGRAMMABLE PID DIGITAL TEMPERATURE CONTROLLER WITH DUAL DISPLAY TO INDICATE SET <(>&<)> PROCESS TEMPERATURE. TEMPERATURE RANGE: 200 DEGREE C TO 1000 DEGREE C. TEMPERATURE ACCURACY: +/- 0.5- OR 1-DEGREE C. TEMPERATURE RESOLUTION: 0.1 DEGREE C. TEMPERATURE CONTROL: AS PER IS 1350 OR ISO 3088. CONSTRUCTION: EXTERNAL BODY WITH HEAVY REINFORCED STEEL WITH POWDER COATED FINISH. INBUILT SAFETY FUSE FOR CONTROLLER. KANTHAL HEATING ELEMENT COIL. MUFFLE OF SUPERIOR QUALITY HEAT TREATED REFRACTORY. ALARM SYSTEM TO INDICATE DEVIATION IN TEMPERATURE. INSULATED DOORS WITH STURDY LATCH. CERTIFICATION: PROVIDED WITH FACTORY CALIBRATED CERTIFACTE OF THE THERMOCOUPLE WITH COMPLIANCE OF ISO/IEC 17025. SPARES REQUIRED FOR 2 YEARS OF OPERATION. SAFETY TONGS FOR SAMPLE PICKING. Item Note : Page 5 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 11 28037049 0014 0011 300132852 PLT,HOT PLT,230 V , 3.0 KW Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO PLATE TYPE : HOT PLATE , ADDITIONAL INFORMATION : SUPPLY : 230 V , 3.0 KW Item Details : HOT PLATE TS MOC: Cast iron which is powder coated. Thermostatic control for the temperature control. Electric shock proof required. Body made of MS Powder coated. Dimensions: 45cm X 60cm Item Note : 12 28037049 0015 0012 300325156 UNIT,MAGNETIC STIRRER,160X160X145MM Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO UNIT TYPE : MAGNETIC STIRRER , SIZE : W:160 X D:160 X H:145 MM ADDITIONAL INFORMATION : WITH HOT PLATE Item Details : Magnetic Stirrer TS Top Housing Body : Stainless Steel Stirring Capacity: 2 Ltr. Display: Digital Item Note : 13 28037049 0016 0013 300337003 METER,PH METER,DIGITAL,0-14pH Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO METER TYPE: PH METER , READOUT: DIGITAL , RANGE: 0-14 pH Item Details : PH Meter TS 1. Range: 0 to 14 2. Resolution :0.01 PH 3. Accuracy @ Room Temp: +/- 0.02 PH 4. Calibration: Manual in 2 points through offset <(>&<)> slope trimmers. 5. For calibration, preprogrammed buffer sets should be supplied, 6. Battery Life should be 300 hrs of continuous use 7. Dimension: 212 x 145 x 67 mm 8. RS 232 interface data storage required. Item Note : Page 6 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 14 28037049 0019 0014 300846366 PRESS,PELLET-HYD,40TO Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO PRESS,HYDRAULIC PELLET CAPACITY:40 TO APPLICATION:PREPARATION OF PELLETS FOR SPECTRAL ANALYSES MOUNTING TYPE:FLOOR MOUNTING , WORKING PRINCIPLE:PRESSURE FORCE MAX FORCE:400 KN , HYDRAULIC PUMP FEED RATE - FORWARD MOVEMENT:2.49 MM/S HYDRAULIC PUMP FEED RATE - RETURN MOVEMENT:4.0 MM/S HYDRAULIC PUMP CAPACITY:3 LPM , WORKING PRESSURE:250 BAR OIL TANK CAPACITY:17 L , MOTOR DETAILS:1.5KW,2HP,RPM-1415,415V,3 PHASE Item Details : Specification of PRESS, PELLET-HYD,40TO Ring Type : Set of C TYPE-2 (Robot pickup <(>&<)> placing in magazine) Ring diameter: OD 51.5mm x ID 35mm Height 8.6/8.8 mm. Pellets breaker tools required. 1.Application: Preparation of pellets for spectral analysis. 2.Working Principle: Pressure Force 3.Design Capacity 250 Bar, Operating Pressure: 200 Bar to achieve 400 KN (to increase Safety) 4. Max Force: 400 KN @ 200 Bar, (40Tons), With Digital Display (HMI) of Set <(>&<)> Actual Load 5.Feed Material: Iron ore pellets, Lump ore, Sinter, Ferro Alloys, Limestone, Dolomite, quartz, Slag 6.Force Range 5 Tons to 40 Tons (Digitally Controlled) 7.Power of Hydraulic Pump 2 HP; Three-way plunger type 8.Oil Higher Tank Capacity volume requite to helps in keeping the oil temp in lower limits. 9.2 years spares required for operation of equipment. 10.Automatic <(>&<)> Fully programmable with PLC system. -Automatic: Digital setting of Compression Force – 5 Tons To 40 Tons -Digital Setting of Hold Time – 0 to 300 Seconds -Digital Setting of Intervals of decompression <(>&<)> return to Off Position. -Swing-Out cross head; Enabling fast change of die-sets and quick operation. -Easy and fast loading and unloading of samples. -Auto Cycles for each type of pelleting (Aluminium Cup, Ring <(>&<)> Naked Pellet) is Automatic compression, ejection, and relief. -Safety interlock and automatic pump Shut-off safety valve is provided for safe Operation in manual mode for all types of pelletizing is also possible. 11.Installation <(>&<)> commissioning is in vendor scope. Item Note : 15 28037049 0020 0015 300844382 JAW-CRUSHER,LAB,25TO10MM,65MM,1.5KW Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO JAW-CRUSHER,LABORATORY GAP ADJUSTMENT:25 TO 10 MM , FEED SIZE:65 MM , RATED POWER:1.5 KW OUTPUT SIZE - 2ND PASS:-3.35 MM , MOUNTING TYPE:FLOOR WORKING PRINCIPLE:PRESSURE , RATED VOLTAGE:440 VAC OUTPUT SIZE - 1ST PASS:+3.35 MM Item Details : Specification of Jaw Crusher: Mat. Code - 300844382 1 Iron Bearing Sample crushing. 2 Safety features requires while material clogging due to sudden material dumping. 3 All moveable parts of equipment cover with Pully Guard. 4 spares required for 2 years equipment operation. 5 Installation <(>&<)> commissioning is in vendor scope. Item Note : Page 7 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 16 28037049 0021 0016 300160108 PULVERIZER,LAB,VIBRATORY CUP MILL,150ML Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO PULVERIZER,LABORATORY, TYPE: VIBRATORY CUP MILL, , CAPACITY: 150 ML, INLET FEED PARTICLE SIZE: 5 MESH, , OUTLET PRODUCT SIZE: 300 MESH, DRIVER: ELECTRICAL MOTOR, , DRIVER CAPACITY: 1 HP ADDITIONAL INFORMATION: MATERIAL: MANGANESE STEEL Item Details : Specification of PULVERIZER,LAB,VIBRATORY CUP MILL,150ML 1 Sample Material: Iron ore pellets, Lump ore, Sinter, Ferro Alloys, Coke, Coal Limestone, Dolomite, quartz, Slag 2 Feed Size = 8 mm 3 Output Size = up to -45 micron or less 4 Cycle time = 30 to 180 seconds for 20 to 80 gm sample. 5 Motor power consider as actual requirement for equipment operation. 6 Safety: Overload tripping mechanism required <(>&<)> door sensor required. 7 Capacity: 15-20 samples per hours. 8 Bowl Set required as below, For one equipment: Hardened Steel – 5 no’s Tungsten Carbide-Lined- 01 no 9 Spares for 2 years equipment operation. 10 Automatic <(>&<)> fully programmable with PLC system. - Digital setting of Programmable Grinding cycle time base on requires material fineness. - Digital Setting of Time in Seconds. - Floor mounting required. 11 Installation <(>&<)> commissioning is in vendor scope.

Tender Notice

46102653

Arcelor Mittal Nippon Steel India Limited

Indian

Hazira

Gujarat

November 14, 2024

Key Value

Ref. Documents

Ref. Documents

Ref. Documents

To Download Tender Document Click on the below link

Tender For Pr:28037049_Bf-2 Lab Equipments_Qa/Qc 28037049 0001 0001 300853805 OVEN,HOT-AIR,MN:SI_HAO_45,0-300°C,4 Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO OVEN,HOT-AIR TYPE:ELECTRIC DRYING , WORKING TEMPERATURE:0-300 °C NO OF TRAYS:4 , RATED POWER:8 KW CHAMBER SIZE:914X 914 X 1524 MM CONTROL PANEL DETAILS:PID ,DIGITAL TEMPERATURE CONTROLLER ADDITIONAL INFORMATION:CAPACITY = 216 LTR , MAKE MODEL/BRAND:SI_HAO_45 MAKE NAME:SALVIN Item Details : EQUIPMENT: OVEN BIG MAT CODE: 300853805 Technical Specification: 1 Programmable PID Digital temperature controller with Dual display to indicate set <(>&<)> process temperature. 2. Temperature Accuracy: +/- 0.5- or 1-degree C 3.Temp. Resolution:0.1 Degree C 4 Heating Element is made from ISI certified Brand material. 5 Air circulation: Provision for preheating of the inlet air required. 6 Temperature controls: As per IS 1350 or ISO 3088. 7 Construction: Interior and Exterior with SS 304. 8 Inbuilt Safety fuse for controller. 9 All heat affected parts are painted with heat resistant paint. 10 Alarm system to indicate deviations in Temperature. 11 Insulated doors with sturdy latch require (Double Doors required) 12 Certification: Provided with factory Calibrated Certificate for the Temperature Controller/Thermocouple need to compliance ISO/IEC 17025. 13 Data logger with built-in storage <(>&<)> USB Port facility to transfer stored data from data logger to pen drive system. 14 Ventilation provision (Chimney) required on the Top. 15 Oven Capacity consider as per chamber size dimension. 16 Spares required for 2 years operation. Item Note : 2 28037049 0002 0002 300903632 OVEN,HOT-AIR,0-300°C,03 Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO OVEN,HOT-AIR TYPE:HOT AIR , WORKING TEMPERATURE:0-300 °C , NO OF TRAYS:03 RATED POWER:230 KW , CHAMBER SIZE:610 X 610 X 915 -W X D X H MM CONTROL PANEL DETAILS:PROGRAMMABLE PID DIGITAL TEMPERATURE CONTROLLER ADDITIONAL INFORMATION:INTERIOR WITH SS 304 AND EXTERIOR STEEL WITH POWDER COATED FINISH SS 304 PERFORATED TRAYS Item Details : EQUIPMENT: OVEN MEDIUM MAT CODE: 300903632 Technical Specification: 1 Programmable PID Digital temperature controller with Dual display to indicate set <(>&<)> process temperature. 2. Temperature Accuracy: +/- 0.5- or 1-degree C 3.Temp. Resolution:0.1 Degree C 4 Heating Element is made from ISI certified Brand material. 5 Air circulation: Provision for preheating of the inlet air required. 6 Temperature controls: As per IS 1350 or ISO 3088. 7 Construction: Interior and Exterior with SS 304. 8 Inbuilt Safety fuse for controller. 9 All heat affected parts are painted with heat resistant paint. 10 Alarm system to indicate deviations in Temperature. 11 Insulated doors with sturdy latch require. 12 Certification: Provided with factory Calibrated Certificate for the Temperature Controller/Thermocouple need to compliance ISO/IEC 17025. 13 Data logger with built-in storage <(>&<)> USB Port facility to transfer stored data from data logger to pen drive system. 14 Ventilation provision (Chimney) required on the Top. 15 Spares required for 2 years operation. Item Note : Page 2 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 3 28037049 0003 0003 300180459 OVEN,HOT AIR,2000W,0-300DEG.C,165L Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO OVEN TYPE : HOT AIR , ELECTRICAL RATING : 2000 W TEMPERATURE RATING : 0-300 DEG.C , CAPACITY : 165 L Item Details : EQUIPMENT: OVEN SMALL MAT CODE: 300180459 Technical Specification: 1 Programmable PID Digital temperature controller with Dual display to indicate set <(>&<)> process temperature. 2. Temperature Accuracy: +/- 0.5- or 1-degree C 3.Temp. Resolution:0.1 Degree C 4 Heating Element is made from ISI certified Brand material. 5 Air circulation: Provision for preheating of the inlet air required. 6 Temperature controls: As per IS 1350 or ISO 3088. 7 Construction: Interior and Exterior with SS 304. 8 Inbuilt Safety fuse for controller. 9 All heat affected parts are painted with heat resistant paint. 10 Alarm system to indicate deviations in Temperature. 11 Insulated doors with sturdy latch require. 12 Certification: Provided with factory Calibrated Certificate for the Temperature Controller/Thermocouple need to compliance ISO/IEC 17025. 13 Data logger with built-in storage <(>&<)> USB Port facility to transfer stored data from data logger to pen drive system. 14 Ventilation provision (Chimney) required on the Top. 15 Spares required for 2 years operation. Item Note : 4 28037049 0004 0004 300160060 CRUSHER,JAW,450X1120X840MM;100MM;80KG/HR Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO CRUSHER,JAW JAW CRUSHER SIZE: 450X1120X840 MM , FEED SIZE: 100 MM CAPACITY: 80 KG/HR , NO OF PASSES: 2/3 , DRIVER: MOTORIZED DRIVER CAPACITY: 2 HP Item Details : Specification of Jaw Crusher: Mat. Code -300160060 (100 mm) 1 Iron Bearing, Limestone, Dolomite <(>&<)> Quartz Sample crushing. 2 Product size 1st pass - <(><<)>30 mm to 12.5 mm 3 Product size 2nd pass - <(><<)> 3 mm 4 Safety features requires while material clogging due to sudden material dumping. 5 All moveable parts of equipment cover with Pully Guard. 6 spares required for 2 years equipment operation. 7 Installation <(>&<)> commissioning is in vendor scope. Item Note : 5 28037049 0005 0005 300904189 JAW-CRUSHER,LAB,150-10MM,UPTO150MM,5.5KW Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO JAW-CRUSHER,LABORATORY GAP ADJUSTMENT:150-10 MM , FEED SIZE:UPTO 150 MM RATED POWER:5.5 KW , OUTPUT SIZE - 2ND PASS:20 -10 MM MOUNTING TYPE:FLOOR , WORKING PRINCIPLE:IMPACT RATED VOLTAGE:440 VAC ADDITIONAL INFORMATION:HARDNESS STEEL + JAW BLADE SET OUTPUT SIZE - 1ST PASS:150-10 MM Item Details : Specification of Jaw Crusher: Mat. Code - 300904189 1 Iron Bearing, Coke <(>&<)> coal Sample crushing. 2 Safety features requires while material clogging due to sudden material dumping. 3 All moveable parts of equipment cover with Pully Guard. 4 spares required for 2 years equipment operation. 5 Installation <(>&<)> commissioning is in vendor scope Item Note : Page 3 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 6 28037049 0006 0006 300896599 DRUM,LAB,TUMBLER,1:60,2200W,415V Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO DRUM,LABORATORY TYPE:TUMBLER , GEAR RATIO:1 : 60 , POWER RATING:2200 W VOLTAGE RATING:415 V , ADDITIONAL INFORMATION:IS-6495:1994 & ISO :3271 Item Details : Specifications for Tumble Drum Following are the specifications for the Tumble Drum, It is use for measure for evaluating the resistance of Iron ores <(>&<)> Sinter to size degradation by impact and abrasion. It covers the determination of the Tumble and abrasion indices at BF2 QAQC Laboratory. Sr.No Parameter Requirement as per IS-6495 <(>&<)> ISO-3271 1 MOC Suitable steel grade 2 Drum Plate thickness Side portion of 10 mm and 6 mm for periphery 3 Size of Drum 500 (W) x 1000 (L) mm (Confirming as per above standard) 4 Lifters Two equally spaced L-shaped steel lifters 50 mm flat × 50 mm high × 5 mm thick and 500 mm long inside the drum by welding. 5 Shaft Suitable graded hardened steel 6 Drum rotation speed of 25 r/min ± 1 r/min and stops within one revolution. The equipment shall be fitted with a revolution counter and with an automatic device for stopping the drum after a predetermined number of revolutions. 7 Height of Drum axis 700 mm 8 Test sieves square apertures of the following nominal sizes: 6,30 mm and 500 m. 9 Tray Required for sample empty out after testing, Dimension as per required. 10 Programmer PLC/Microprocessor based 11 Control Panel Consists of: Time control, RPM Control with proper switches and accessories 12 Others Branded suppliers with previous history of supply to major Industries <(>&<)> User list to be shared with us during submission of quote. 13 Safety All moveable parts cover with safety guards. 14 G.A.Drawing Require. Item Note : 7 28037049 0009 0007 300904402 SPLITTER,SMPL,RIFFLE,16MM,10KG,4 Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO SPLITTER,SAMPLE TYPE:RIFFLE , FEED SIZE:16 MM , HOPPER CAPACITY:10 KG NO OF OUTPUT VOLUME DIVISION:4 ADDITIONAL INFORMATION:SS 50MM SLOT WITH SCOOP AND COLLECTION BOX, STD. METHD. FOR REDUCING SAMPL.OF AGGREGATE TO TESTING SIZE. Item Details : Item Note : 8 28037049 0010 0008 300904782 SPLITTER,SMPL,RIFFLE,10MM,5KG,4 Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO SPLITTER,SAMPLE TYPE:RIFFLE , FEED SIZE:10 MM , HOPPER CAPACITY:5 KG NO OF OUTPUT VOLUME DIVISION:4 ADDITIONAL INFORMATION:SS 30MM SLOT WITH SCOOP AND COLLECTION BOX, STD. METHD. FOR REDUCING SAMPL.OF AGGREGATE TO TESTING SIZE. Item Details : Item Note : Page 4 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 9 28037049 0012 0009 300129172 ELMNT,HEATING,F/MUFFLE FURNACE,KUMAR Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 2 NO ELEMENT TYPE : HEATING , MAJOR EQUIPMENT : MUFFLE FURNACE MAJOR EQUIPMENT MAKE : KUMAR , ADDITIONAL INFORMATION : WITH MUFFLE Item Details : Muffle Furnace-300129172 INNER WORKING DIMENSION: 9 x 9 x 18 (W X H X D) WATTAGE: 7-9.0 PROGRAMMABLE PID DIGITAL TEMPERATURE CONTROLLER WITH DUAL DISPLAY TO INDICATE SET <(>&<)> PROCESS TEMPERATURE. TEMPERATURE RANGE: 200 DEGREE C TO 1200 DEGREE C. TEMPERATURE ACCURACY: +/- 0.5- OR 1-DEGREE C. TEMPERATURE RESOLUTION: 0.1 DEGREE C. TEMPERATURE CONTROL: AS PER IS 1350 OR ISO 3088. CONSTRUCTION: EXTERNAL BODY WITH HEAVY REINFORCED STEEL WITH POWDER COATED FINISH. INBUILT SAFETY FUSE FOR CONTROLLER. KANTHAL HEATING ELEMENT COIL. MUFFLE OF SUPERIOR QUALITY HEAT TREATED REFRACTORY. ALARM SYSTEM TO INDICATE DEVIATION IN TEMPERATURE. INSULATED DOORS WITH STURDY LATCH. SPARES REQUIRED FOR 2 YEARS OF OPERATION. SAFETY TONGS FOR SAMPLE PICKING. CERTIFICATION: PROVIDED WITH FACTORY CALIBRATED CERTIFACTE OF THE THERMOCOUPLE WITH COMPLIANCE OF ISO/IEC 17025. Item Note : 10 28037049 0013 0010 300152271 MUFFLE FURNACE WITH SOLID STATE ELEC.DIG Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 4 NO FURNACE TYPE : MUFFLE ADDITIONAL INFORMATION : WITH SOLID STATE ELEC.DIG ,PROPORTIONAL CONTROLLER CAT NO:KI 25A-03 #### MUFFLE FURNACE WITH SOLID STATE ELEC.DIG ### DISPLY PROPORTIONAL CONTROLLER CAT NO:KI 25A-03 Item Details : EQUIPMENT: MUFFLE FURNACE-300152271 TS: INNER WORKING DIMENSION: 6x 6 x 12 (W X H X D) WATTAGE: 3.0-5.0 KW PROGRAMMABLE PID DIGITAL TEMPERATURE CONTROLLER WITH DUAL DISPLAY TO INDICATE SET <(>&<)> PROCESS TEMPERATURE. TEMPERATURE RANGE: 200 DEGREE C TO 1000 DEGREE C. TEMPERATURE ACCURACY: +/- 0.5- OR 1-DEGREE C. TEMPERATURE RESOLUTION: 0.1 DEGREE C. TEMPERATURE CONTROL: AS PER IS 1350 OR ISO 3088. CONSTRUCTION: EXTERNAL BODY WITH HEAVY REINFORCED STEEL WITH POWDER COATED FINISH. INBUILT SAFETY FUSE FOR CONTROLLER. KANTHAL HEATING ELEMENT COIL. MUFFLE OF SUPERIOR QUALITY HEAT TREATED REFRACTORY. ALARM SYSTEM TO INDICATE DEVIATION IN TEMPERATURE. INSULATED DOORS WITH STURDY LATCH. CERTIFICATION: PROVIDED WITH FACTORY CALIBRATED CERTIFACTE OF THE THERMOCOUPLE WITH COMPLIANCE OF ISO/IEC 17025. SPARES REQUIRED FOR 2 YEARS OF OPERATION. SAFETY TONGS FOR SAMPLE PICKING. Item Note : Page 5 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 11 28037049 0014 0011 300132852 PLT,HOT PLT,230 V , 3.0 KW Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO PLATE TYPE : HOT PLATE , ADDITIONAL INFORMATION : SUPPLY : 230 V , 3.0 KW Item Details : HOT PLATE TS MOC: Cast iron which is powder coated. Thermostatic control for the temperature control. Electric shock proof required. Body made of MS Powder coated. Dimensions: 45cm X 60cm Item Note : 12 28037049 0015 0012 300325156 UNIT,MAGNETIC STIRRER,160X160X145MM Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO UNIT TYPE : MAGNETIC STIRRER , SIZE : W:160 X D:160 X H:145 MM ADDITIONAL INFORMATION : WITH HOT PLATE Item Details : Magnetic Stirrer TS Top Housing Body : Stainless Steel Stirring Capacity: 2 Ltr. Display: Digital Item Note : 13 28037049 0016 0013 300337003 METER,PH METER,DIGITAL,0-14pH Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 1 NO METER TYPE: PH METER , READOUT: DIGITAL , RANGE: 0-14 pH Item Details : PH Meter TS 1. Range: 0 to 14 2. Resolution :0.01 PH 3. Accuracy @ Room Temp: +/- 0.02 PH 4. Calibration: Manual in 2 points through offset <(>&<)> slope trimmers. 5. For calibration, preprogrammed buffer sets should be supplied, 6. Battery Life should be 300 hrs of continuous use 7. Dimension: 212 x 145 x 67 mm 8. RS 232 interface data storage required. Item Note : Page 6 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 14 28037049 0019 0014 300846366 PRESS,PELLET-HYD,40TO Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO PRESS,HYDRAULIC PELLET CAPACITY:40 TO APPLICATION:PREPARATION OF PELLETS FOR SPECTRAL ANALYSES MOUNTING TYPE:FLOOR MOUNTING , WORKING PRINCIPLE:PRESSURE FORCE MAX FORCE:400 KN , HYDRAULIC PUMP FEED RATE - FORWARD MOVEMENT:2.49 MM/S HYDRAULIC PUMP FEED RATE - RETURN MOVEMENT:4.0 MM/S HYDRAULIC PUMP CAPACITY:3 LPM , WORKING PRESSURE:250 BAR OIL TANK CAPACITY:17 L , MOTOR DETAILS:1.5KW,2HP,RPM-1415,415V,3 PHASE Item Details : Specification of PRESS, PELLET-HYD,40TO Ring Type : Set of C TYPE-2 (Robot pickup <(>&<)> placing in magazine) Ring diameter: OD 51.5mm x ID 35mm Height 8.6/8.8 mm. Pellets breaker tools required. 1.Application: Preparation of pellets for spectral analysis. 2.Working Principle: Pressure Force 3.Design Capacity 250 Bar, Operating Pressure: 200 Bar to achieve 400 KN (to increase Safety) 4. Max Force: 400 KN @ 200 Bar, (40Tons), With Digital Display (HMI) of Set <(>&<)> Actual Load 5.Feed Material: Iron ore pellets, Lump ore, Sinter, Ferro Alloys, Limestone, Dolomite, quartz, Slag 6.Force Range 5 Tons to 40 Tons (Digitally Controlled) 7.Power of Hydraulic Pump 2 HP; Three-way plunger type 8.Oil Higher Tank Capacity volume requite to helps in keeping the oil temp in lower limits. 9.2 years spares required for operation of equipment. 10.Automatic <(>&<)> Fully programmable with PLC system. -Automatic: Digital setting of Compression Force – 5 Tons To 40 Tons -Digital Setting of Hold Time – 0 to 300 Seconds -Digital Setting of Intervals of decompression <(>&<)> return to Off Position. -Swing-Out cross head; Enabling fast change of die-sets and quick operation. -Easy and fast loading and unloading of samples. -Auto Cycles for each type of pelleting (Aluminium Cup, Ring <(>&<)> Naked Pellet) is Automatic compression, ejection, and relief. -Safety interlock and automatic pump Shut-off safety valve is provided for safe Operation in manual mode for all types of pelletizing is also possible. 11.Installation <(>&<)> commissioning is in vendor scope. Item Note : 15 28037049 0020 0015 300844382 JAW-CRUSHER,LAB,25TO10MM,65MM,1.5KW Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO JAW-CRUSHER,LABORATORY GAP ADJUSTMENT:25 TO 10 MM , FEED SIZE:65 MM , RATED POWER:1.5 KW OUTPUT SIZE - 2ND PASS:-3.35 MM , MOUNTING TYPE:FLOOR WORKING PRINCIPLE:PRESSURE , RATED VOLTAGE:440 VAC OUTPUT SIZE - 1ST PASS:+3.35 MM Item Details : Specification of Jaw Crusher: Mat. Code - 300844382 1 Iron Bearing Sample crushing. 2 Safety features requires while material clogging due to sudden material dumping. 3 All moveable parts of equipment cover with Pully Guard. 4 spares required for 2 years equipment operation. 5 Installation <(>&<)> commissioning is in vendor scope. Item Note : Page 7 of 7 ArcelorMittal Nippon Steel India Limited AM/NS HAZIRA PLANT 27th KM, Surat-Hazira Road,,HAZIRA,394270,Gujarat,India GSTIN 24AAACE1741P1ZN PAN AAACE1741P CIN U27100GJ1976FLC013787 Request for Quotation Number 6000123397 Date 07.11.2024 Submission Date 14.11.2024 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. J B Somia Contact Email JB.SOMIA@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Material / Service No. Quantity UOM Detail Description Other Details 16 28037049 0021 0016 300160108 PULVERIZER,LAB,VIBRATORY CUP MILL,150ML Technical Details Name : Santosh Kumar Contact : Email : santosh.kumar@amns.in 3 NO PULVERIZER,LABORATORY, TYPE: VIBRATORY CUP MILL, , CAPACITY: 150 ML, INLET FEED PARTICLE SIZE: 5 MESH, , OUTLET PRODUCT SIZE: 300 MESH, DRIVER: ELECTRICAL MOTOR, , DRIVER CAPACITY: 1 HP ADDITIONAL INFORMATION: MATERIAL: MANGANESE STEEL Item Details : Specification of PULVERIZER,LAB,VIBRATORY CUP MILL,150ML 1 Sample Material: Iron ore pellets, Lump ore, Sinter, Ferro Alloys, Coke, Coal Limestone, Dolomite, quartz, Slag 2 Feed Size = 8 mm 3 Output Size = up to -45 micron or less 4 Cycle time = 30 to 180 seconds for 20 to 80 gm sample. 5 Motor power consider as actual requirement for equipment operation. 6 Safety: Overload tripping mechanism required <(>&<)> door sensor required. 7 Capacity: 15-20 samples per hours. 8 Bowl Set required as below, For one equipment: Hardened Steel – 5 no’s Tungsten Carbide-Lined- 01 no 9 Spares for 2 years equipment operation. 10 Automatic <(>&<)> fully programmable with PLC system. - Digital setting of Programmable Grinding cycle time base on requires material fineness. - Digital Setting of Time in Seconds. - Floor mounting required. 11 Installation <(>&<)> commissioning is in vendor scope.