Providing And Supplying Furniture For B.Ed. College At Vansda,Ta. Vansda, Dist.Navsari-1 Providing and supplying High back chair for conference with M.S frame work. Upholstered with Artificial leather/ Leatherette and molded PU foam, together with molded seat & back covers. The back foam should be designed with contoured lumber support for extra comfort. Caster of high durability & hydraulic. The chair should have cylinder with 5 years warranty. The size of chair 53cm x 79cm (Back side) and 51cm x 49cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3. with One piece armrests. The armrests are scratch and weather resistant. The permanent contact mechanism is designed with 360° revolving type, 12º seat tilt 19° back tilt, Front pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjestment, 5 position locking with anti-shock back mechanism, Which should prevent the backrest from impacting the user when the lock is released, static seat depth adjustment=0.5 cm 5 position locking. complete as per sample approved and as directed by the Architect and approved by the Engineer in Charge 2 Providing and supplying Medium back chair for conference with M.S frame work. Upholstered with changeable fabric upholstery covers (as per requirement) and molded PU foam, together with molded seat & back covers. The back foam should be designed with contoured lumber support for extra comfort. Caster of high durability & hydraulic. The chair should have cylinder with 5 years warranty. The size of chair 47.5cm x 58cm (Back side) and 49cm x 48cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3 .with One piece armrests. The armrests are scratch and weather resistant. The permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17 ° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the Architect and approved by the Engineer in Charge 3 Providing and supplying Visitor or Guest chair the seat & back are made of 12mm thick hot pressed plywood upholstered with changeable fabric upholstery covers (as per requirement) and molded PU foam, together with molded seat & back covers. The back foam should be designed with contoured lumber support for extra comfort. The size of chair 45cm x 38cm (Back side) and 45cm x 43cm (seat size). The PU foam should be molded with density =45 ± 2 kg/m3. The armrests with Leg made with Powder coated MS structure as per architect selection. The Seat and back fixed with MS structure with required necessary hardware. complete as per sample approved and as directed by the Architect and approved by the Engineer in Charge 4 Providing and supplying Main Table made with 19mm Thk. Plywood (M1) structure as per architect drawing finished with 1.0 mm Thk. decorative laminate (M24) on outside portion &0.8 mm Thk. liner Laminate inside as specified & approved by architect fixed with necessary fixtures and fastening (Hardware) (M14) as per architect drawing. Provide Plastic Computer Desk Table Grommet Cable Wire Outlet Hole Cover 60mm, Key-board trey, S.S legs, Drawers with telescopic roller channels (M15), Handle (M19) and locking (M16) arrangements with all necessary fixtures and fastening (M14).Provide Shutters as per drawing fixed with handle (M19), hinges (M18), magnet (M14), complete with bidding patties and all required hardware (M14).Provide footrest as per drawing. All exposed edges shall be covered with required Teak wood beading Patti (M4) finished with approved melamine polishing (M29) work. Complete as per architects drawing and as per instruction of architect & engineer in charge. (Refer drawing) 5 Providing and supplying Table made with 19mm Thk. Plywood(M1) structure as per architect drawing finished with 1.0 mm Thk. decorative laminate(M24) on outside portion &0.8 mm Thk. liner Laminate inside as specified & approved by architect with fixed with necessary fixtures and fastening (Hardware) (M14) as per architect drawing. Provide Plastic Computer Desk Table Grommet Cable Wire Outlet Hole Cover 60mm, Key-board trey, S.S legs, Drawers with telescopic roller channels (M15), Handle (M19) and locking (M16) arrangements with all necessary fixtures and fastening (M14).Provide Shutters as per drawing fixed with handle (M19), hinges (M18), magnet (M14), complete with bidding patties and all required hardware (M14).Provide footrest as per drawing. All exposed edges shall be covered with required Teak wood beading Patti (M4) finished with approved melamine polishing (M29) work. Complete as per architects drawing and as per instruction of architect & engineer in charge. (Refer drawing) 6 Providing and supplying sofa(2seater) made with using 19mm Thk. Plywood (M1) structure frame with S.S. legs required necessary support fixed with necessary fixtures and fastening (Hardware)(M14). It shall be covered with 32 Density PU foam(M22)with required Thickness as per design in seat & back and handle portion this should be again covered with 14 mm thick PU foam(M22) with Madarpat cover on it & upholstered fabric(M26) or leather of suggested & approved by architect finished with seat, back & all visible side as per architect drawing. Complete as per architects drawing and as per instruction of architect & engineer in charge. (Refer drawing) 7 Providing and supplying Centre Table/Corner Table/Tipoi with Glass top made with 19mm Thk. Plywood (M1) finished with 1.0 mm Thk. decorative laminate sheet (M24) specified and approved by architect & fixed with necessary fixtures and fastening (Hardware)(M14) inclusive of approved melamine polishing(M29)work. Top part of center Table covered with 8 mm Thk. toughened Glass (M27) with Polished Edges. Complete as per architects drawing and as per instruction of architect & engineer in charge. (Refer drawing) 8 Providing Visitor’s group seating of three people made from perforated S.S. CRC sheet (C-201), steel plate with 1.5mm thick. Bottom: made from 20mm x 40mm S. S.CRC tubes as per sample finished with stainless steel chrome plated as specified in specification sheet and as approved by Engineer-in-charge. 9 Providing and supplying Display table made with using 19mm Thk. Plywood (M1) structure finished with 1.0 mm Thk. decorative laminate (M24) sheet approved by architect fixed with necessary fixtures and fastening (Hardware) (M14). Top portion of table all edges shall be covered with required Teak wood beading Patti (M4) finished with approved melamine polishing (M29) work. Complete as per architect’s drawings and as per instruction of architect & engineer in charge. (Refer drawing) Display table size:- 68 x 75 x 75(H) cm