Supplying And Providing Pumping Machinery And Relative Spare parts For Nagarpalika Various Drainage Pumping Station And Waterworks @ Khambhat, Dist. Anand (Pkg-6)-1 Providing And Installing Pumping Machinery Rabarivas Drainage Pumping Station 2 Providing And Installing Control Panel Board, Valve and Other Required Equipment For Rabarivas Drainage Pumping Station 3 Providing And Installing Pumping Machinery Salva Drainage Pumping Station 4 Providing And Installing Valve and Other Required Equipment For Salva Drainage Pumping Station 5 Providing And Installing Pumping Machinery of Chokhandi Water Works 6 Providing And Installing Pumping Machinery of Madalabag Water Works Supply, installation, testing & commissioning of sewage submersible, non clog type suitable for working on three phase, 50 Hz ± 3%, 415 V ± 10%, AC supply, 1450 RPM synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, all supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer etc. complete set & following M.O.C: Casing: CI, Impeller: SS CF8M, Wearing ring & Bearing bush: Bronze, TC mechanical seal, CS / SS bearing, SS shaft with sleeve, SS strainer & MS motor body. 25 HP, Head:- 26 Meter, Discharge:- 1477 LPM 40 HP, Head:- 20 Meter, Discharge:- 9396 LPM Auto transformer starter suitable for local & remote pump control application consisting of Auto Transformer (vacuum impregnated, air cooled having three (3) tappings at 50%, 65% and 80%), incomer MCCB / MPCB, overload relay and contactors as per Type II coordination including digital MFM with RS 485 communication port, analogue type ammeter with selector switch, run hour meter, required protective relays & control accessories.(d) A. T. S. from 46 to 50 HP (d) A. T. S. from 46 to 50 HP (a) A. T. S. from 21 to 30 HP Providing and supplying ISI mark C I D / F sluice valve us per IS 14846 (Lates Edition) o1 follwing class and diameter including al taxes, insurance, transpoction, freight chages octroi, inspection charge, loding ,unloading convece to deparment store, stacking etc complet P N 1.6 with gear operated ( Alt-1 type long body 150 mm dia) Providing and supplying ISI mark reflux valve us per IS 5312 ( Latest Edition) of following class and diameter including al taxes, insurance, transpoction, freight chages octroi, inspection charge, loding ,unloading convece to deparment store, stacking etc complet (P N 1.6 IS 5312 (150 MM dia)) 50.00 Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS 8329- 2000). Rate for DI pipe based on Wholesale Price index of Pig Iron as 114.20 for the month of Febuaury-2019. For sewerage project cement mortor lining shall be with sulphate resistance cement (2) 150 mm 50.00 Providing and making flanged joints to flanged DI / C.I. pipes of all classes / specials etc. including cost of all jointing materials rubber packing, nut bolts, inclduing lowering laying jointing labour hydraulic testing etc. complete. (3) 200 mm D.I. Specials 150.00 Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-EN- 545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994delivery of specials is to be made to GWSSB store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete. With external bitumen & zinc coating & internal cement mortar lining (Flanged ended, 80 to 300mm dia) 1.00 Supply single girder type fully electrically operated EOT crane with electrically operated hoist, class II duty, geared travelling trolley with seven meter lift complete with long travel rail track (40 mm sq. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP 54, control panel & down pendant control block, brake, safety device, cables form motor to starter panel & other required accessories & tested as per IS Specifications. 2 T, Span- 0 m - 6 m 1.00 S.S guide Pipe, S.S chain, Foundation boult, RCC Foundation, duck foot bend, auto coupling (for 10 hp) 1.00 S.S guide Pipe, S.S chain, Foundation boult, RCC Foundation, duck foot bend, auto coupling (for 40 hp) 95000.00 1.00 Installation and Dismantal Charge of all electrical and mechnical euipments of 1 pumping station 400000.00 1.00 Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism, current limiting type with Thermal- Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NCvpotential free auxiliary contacts with all necessary Electro- Mechanical protections & interlocks etc. MCCB module, when used as Incommer / Bus Coupler, shall have enclosure dimensions- 1800(H) x 600(W) x 600 (D) & following technical features: 4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), Microprocessor release 49660.45 50.00 PVC insulated flat submersible cable as per detailed technical specifications of R/C of GWSSB conforming to IS 694, IEC 60227 / 60228. h) 1 R x 3 C x 35.0 mm2 Supply, installation, testing commissioning of sewage submersible, clog type suitable for working on three phase, 50 Hz ± 3%, 415 V ± 10%, AC supply, 1450 RPM synchronous speed with 3 core flat copper cable from pump to starter panel with cable end terminations, supports, clamps, pipe fittings along with mechanical seal, bearing bush, strainer complete set & following M.O.C: Casing: Impeller: SS CF8M, Wearing ring & Bearing bush: Bronze, TC mechanical seal, CS / bearing, SS shaft with sleeve, SS strainer MS motor body. 2.00 10 HP, Head:- 20 Meter, Discharge:- 750 LPM 2.00 40 HP, Head:- 20 Meter, Discharge:- 9396 LPM 2.00 Auto transformer starter suitable for local & remote pump control application consisting of Auto Transformer (vacuum impregnated, air cooled having three (3) tappings at 50%, 65% and 80%), incomer MCCB / MPCB, overload relay and contactors as per Type II coordination including digital MFM with RS 485 communication port, analogue type ammeter with selector switch, run hour meter, required protective relays & control accessories.(d) A. T. S. from 46 to 50 HP 2.00 DOL / Star Delta starter suitable for local & remote pump control application consisting of MPCB, overload relay and contactors as per Type II coordination including digital voltmeter, analogue ammeter with selector switch, run hour meter, required protective relays & control accessories. (e) S. D. from 11 to 15 HP 4.00 Providing and supplying ISI mark C I D / F sluice valve us per IS 14846 (Lates Edition) o1 follwing class and diameter including al taxes, insurance, transpoction, freight chages octroi, inspection charge, loding ,unloading convece to deparment store, stacking etc complet P N 1.6 with gear operated ( Alt-1 type long body 150 mm dia) 4.00 Providing and supplying ISI mark reflux valve us per IS 5312 ( Latest Edition) of following class and diameter including al taxes, insurance, transpoction, freight chages octroi, inspection charge, loding ,unloading convece to deparment store, stacking etc complet (P N 1.6 IS 5312 (150 MM dia)) 50.00 Providing and supplying D. I. K-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS 8329- 2000). Rate for DI pipe based on Wholesale Price index of Pig Iron as 114.20 for the month of Febuaury-2019. For sewerage project cement mortor lining shall be with sulphate resistance cement (2) 150 mm 50.00 Providing and making flanged joints to flanged DI / C.I. pipes of all classes / specials etc. including cost of all jointing materials rubber packing, nut bolts, inclduing lowering laying jointing labour hydraulic testing etc. complete. (3) 200 mm D.I. Specials 150.00 Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-EN- 545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994delivery of specials is to be made to GWSSB store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete. With external bitumen & zinc coating & internal cement mortar lining (Flanged ended, 80 to 300mm dia) 1.00 Supply single girder type fully electrically operated EOT crane with electrically operated hoist, class II duty, geared travelling trolley with seven meter lift complete with long travel rail track (40 mm sq. bar), moving or cross girder, all three motions electrically operated by suitable rating motor IP 54, control panel & down pendant control block, brake, safety device, cables form motor to starter panel & other required accessories & tested as per IS Specifications. 2 T, Span- 0 m - 6 m 1.00 S.S guide Pipe, S.S chain, Foundation boult, RCC Foundation, duck foot bend, auto coupling (for 10 hp) 1.00 S.S guide Pipe, S.S chain, Foundation boult, RCC Foundation, duck foot bend, auto coupling (for 40 hp) 1.00 Installation and Dismantal Charge of all electrical and mechnical euipments of 1 pumping station 1.00 Above 80 A, upto & including 250 A, 3 & 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism, current limiting type with Thermal- Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NCvpotential free auxiliary contacts with all necessary Electro- Mechanical protections & interlocks etc. MCCB module, when used as Incommer / Bus Coupler, shall have enclosure dimensions- 1800(H) x 600(W) x 600 (D) & following technical features: 4 Pole, MCCB with Breaking Capacity of Icu=50 KA at 415V (Ics =100% of Icu), Microprocessor release 50.00 PVC insulated flat submersible cable as per detailed technical specifications of R/C of GWSSB conforming to IS 694, IEC 60227 / 60228. h) 1 R x 3 C x 35.0 mm2 2.00 3 Phase Borewell Submersible Pump Sets with 6 meter cable 40 HP Head:- 52 Meter, Discharge:- 2300 LPM 2.00 Installation, testing & commissioning for pump sets 1.00 250A 4 Pole Busbar Chamber:- Wall Mounted IP:50 with EC Grade Aluminum Busbar R,Y,B, N -4 Pole With Insulating Materials / Supports Construction of Busbar Chamber 1.5mm Thick CRCA Sheet, Duly Powder Coated RAL-7032/7035 VWith Both Side Earth Stud Round Cutout for Incomingoutgoing Cable as per suitable Cable. Size of Chamber :- 5000mm(W)x400mm(H) x 300mm(D) 140.00 Providing and supplying ISI mark G. I. pipes with Couplings of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS -1239) 140.00 Lowering, laying and jointing G. I. pipes with G. I. specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance from stores to site of work, labour, giving hydraulic testing, etc. comple D.I. Specials 200.00 Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-EN- 545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994delivery of specials is to be made to GWSSB store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete. With external bitumen & zinc coating & internal cement mortar lining (Flanged ended, 80 to 300mm dia) 3.00 3 Phase Borewell Submersible Pump Sets with 6 meter cable 50 HP Head:- 56 Meter, Discharge:- 2500 LPM 3.00 Installation, testing & commissioning pump sets 1.00 250A 4 Pole Busbar Chamber:- Wall Mounted IP:50 with EC Grade Aluminum Busbar R,Y,B, N -4 Pole With Insulating Materials / Supports Construction of Busbar Chamber 1.5mm Thick CRCA Sheet, Duly Powder Coated RAL-7032/7035 VWith Both Side Earth Stud Round Cutout for Incomingoutgoing Cable as per suitable Cable. Size of Chamber :- 5000mm(W)x400mm( x 300mm(D) 200.00 Providing and supplying ISI mark G. I. pipes with Couplings of following class and diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete. (IS -1239) 200.00 Lowering, laying and jointing G. I. pipes with G. I. specials of following diameters proper position, grade and alignment directed by Engineer-in-charge including conveyance from stores to site of work, labour, giving hydraulic testing, etc. comple 200.00 Manufacture, Supply & Delivery of Ductile Iron Flange socket spigot bends, tees, reducers or any other specials as per BS-EN- 545/1995 Class-A series K12 suitable for use with D.I. Pipes manufactured as per IS:8329/1994delivery of specials is to be made to GWSSB store or site of works any where in Gujarat including all taxes, loading, unloading, carting, stacking, insurance, inspection charges, octroi etc. complete. With external bitumen & zinc coating & internal cement mortar lining (Flanged ended, 80 to 300mm dia)